URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ARM7_AT91SAM7X256_Eclipse/] [RTOSDemo/] [webserver/] [SAM7_EMAC.c] - Rev 867
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /* Standard includes. */ #include <string.h> /* Scheduler includes. */ #include "FreeRTOS.h" #include "semphr.h" #include "task.h" /* Demo application includes. */ #include "SAM7_EMAC.h" /* uIP includes. */ #include "uip.h" /* Hardware specific includes. */ #include "Emac.h" #include "mii.h" #include "AT91SAM7X256.h" /* USE_RMII_INTERFACE must be defined as 1 to use an RMII interface, or 0 to use an MII interface. */ #define USE_RMII_INTERFACE 0 /* The buffer addresses written into the descriptors must be aligned so the last few bits are zero. These bits have special meaning for the EMAC peripheral and cannot be used as part of the address. */ #define emacADDRESS_MASK ( ( unsigned long ) 0xFFFFFFFC ) /* Bit used within the address stored in the descriptor to mark the last descriptor in the array. */ #define emacRX_WRAP_BIT ( ( unsigned long ) 0x02 ) /* Bit used within the Tx descriptor status to indicate whether the descriptor is under the control of the EMAC or the software. */ #define emacTX_BUF_USED ( ( unsigned long ) 0x80000000 ) /* A short delay is used to wait for a buffer to become available, should one not be immediately available when trying to transmit a frame. */ #define emacBUFFER_WAIT_DELAY ( 2 ) #define emacMAX_WAIT_CYCLES ( configTICK_RATE_HZ / 40 ) /* Misc defines. */ #define emacINTERRUPT_LEVEL ( 5 ) #define emacNO_DELAY ( 0 ) #define emacTOTAL_FRAME_HEADER_SIZE ( 54 ) #define emacPHY_INIT_DELAY ( 5000 / portTICK_RATE_MS ) #define emacRESET_KEY ( ( unsigned long ) 0xA5000000 ) #define emacRESET_LENGTH ( ( unsigned long ) ( 0x01 << 8 ) ) /* The Atmel header file only defines the TX frame length mask. */ #define emacRX_LENGTH_FRAME ( 0xfff ) /* Peripheral setup for the EMAC. */ #define emacPERIPHERAL_A_SETUP ( ( unsigned long ) AT91C_PB2_ETX0 ) | \ ( ( unsigned long ) AT91C_PB12_ETXER ) | \ ( ( unsigned long ) AT91C_PB16_ECOL ) | \ ( ( unsigned long ) AT91C_PB11_ETX3 ) | \ ( ( unsigned long ) AT91C_PB6_ERX1 ) | \ ( ( unsigned long ) AT91C_PB15_ERXDV ) | \ ( ( unsigned long ) AT91C_PB13_ERX2 ) | \ ( ( unsigned long ) AT91C_PB3_ETX1 ) | \ ( ( unsigned long ) AT91C_PB8_EMDC ) | \ ( ( unsigned long ) AT91C_PB5_ERX0 ) | \ ( ( unsigned long ) AT91C_PB14_ERX3 ) | \ ( ( unsigned long ) AT91C_PB4_ECRS_ECRSDV ) | \ ( ( unsigned long ) AT91C_PB1_ETXEN ) | \ ( ( unsigned long ) AT91C_PB10_ETX2 ) | \ ( ( unsigned long ) AT91C_PB0_ETXCK_EREFCK ) | \ ( ( unsigned long ) AT91C_PB9_EMDIO ) | \ ( ( unsigned long ) AT91C_PB7_ERXER ) | \ ( ( unsigned long ) AT91C_PB17_ERXCK ); /*-----------------------------------------------------------*/ /* * Prototype for the EMAC interrupt function - called by the asm wrapper. */ extern void vEMACISR_Wrapper( void ) __attribute__((naked)); /* * Initialise both the Tx and Rx descriptors used by the EMAC. */ static void prvSetupDescriptors(void); /* * Write our MAC address into the EMAC. The MAC address is set as one of the * uip options. */ static void prvSetupMACAddress( void ); /* * Configure the EMAC and AIC for EMAC interrupts. */ static void prvSetupEMACInterrupt( void ); /* * Some initialisation functions taken from the Atmel EMAC sample code. */ static void vReadPHY( unsigned char ucPHYAddress, unsigned char ucAddress, unsigned long *pulValue ); #if USE_RMII_INTERFACE != 1 static void vWritePHY( unsigned char ucPHYAddress, unsigned char ucAddress, unsigned long ulValue); #endif static portBASE_TYPE xGetLinkSpeed( void ); static portBASE_TYPE prvProbePHY( void ); /*-----------------------------------------------------------*/ /* Buffer written to by the EMAC DMA. Must be aligned as described by the comment above the emacADDRESS_MASK definition. */ #pragma data_alignment=8 static volatile char pcRxBuffer[ NB_RX_BUFFERS * ETH_RX_BUFFER_SIZE ]; /* Buffer read by the EMAC DMA. Must be aligned as described by he comment above the emacADDRESS_MASK definition. */ #pragma data_alignment=8 static char pcTxBuffer[ NB_TX_BUFFERS * ETH_TX_BUFFER_SIZE ]; /* Descriptors used to communicate between the program and the EMAC peripheral. These descriptors hold the locations and state of the Rx and Tx buffers. */ static volatile AT91S_TxTdDescriptor xTxDescriptors[ NB_TX_BUFFERS ]; static volatile AT91S_RxTdDescriptor xRxDescriptors[ NB_RX_BUFFERS ]; /* The IP and Ethernet addresses are read from the uIP setup. */ const char cMACAddress[ 6 ] = { uipMAC_ADDR0, uipMAC_ADDR1, uipMAC_ADDR2, uipMAC_ADDR3, uipMAC_ADDR4, uipMAC_ADDR5 }; const unsigned char ucIPAddress[ 4 ] = { uipIP_ADDR0, uipIP_ADDR1, uipIP_ADDR2, uipIP_ADDR3 }; /* The semaphore used by the EMAC ISR to wake the EMAC task. */ static xSemaphoreHandle xSemaphore = NULL; /*-----------------------------------------------------------*/ xSemaphoreHandle xEMACInit( void ) { /* Code supplied by Atmel -------------------------------*/ /* Disable pull up on RXDV => PHY normal mode (not in test mode), PHY has internal pull down. */ AT91C_BASE_PIOB->PIO_PPUDR = 1 << 15; #if USE_RMII_INTERFACE != 1 /* PHY has internal pull down : set MII mode. */ AT91C_BASE_PIOB->PIO_PPUDR = 1 << 16; #endif /* Clear PB18 <=> PHY powerdown. */ AT91C_BASE_PIOB->PIO_PER = 1 << 18; AT91C_BASE_PIOB->PIO_OER = 1 << 18; AT91C_BASE_PIOB->PIO_CODR = 1 << 18; /* After PHY power up, hardware reset. */ AT91C_BASE_RSTC->RSTC_RMR = emacRESET_KEY | emacRESET_LENGTH; AT91C_BASE_RSTC->RSTC_RCR = emacRESET_KEY | AT91C_RSTC_EXTRST; /* Wait for hardware reset end. */ while( !( AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_NRSTL ) ) { __asm volatile ( "NOP" ); } __asm volatile ( "NOP" ); /* Setup the pins. */ AT91C_BASE_PIOB->PIO_ASR = emacPERIPHERAL_A_SETUP; AT91C_BASE_PIOB->PIO_PDR = emacPERIPHERAL_A_SETUP; /* Enable com between EMAC PHY. Enable management port. */ AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_MPE; /* MDC = MCK/32. */ AT91C_BASE_EMAC->EMAC_NCFGR |= ( 2 ) << 10; /* Wait for PHY auto init end (rather crude delay!). */ vTaskDelay( emacPHY_INIT_DELAY ); /* PHY configuration. */ #if USE_RMII_INTERFACE != 1 { unsigned long ulControl; /* PHY has internal pull down : disable MII isolate. */ vReadPHY( AT91C_PHY_ADDR, MII_BMCR, &ulControl ); vReadPHY( AT91C_PHY_ADDR, MII_BMCR, &ulControl ); ulControl &= ~BMCR_ISOLATE; vWritePHY( AT91C_PHY_ADDR, MII_BMCR, ulControl ); } #endif /* Disable management port again. */ AT91C_BASE_EMAC->EMAC_NCR &= ~AT91C_EMAC_MPE; #if USE_RMII_INTERFACE != 1 /* Enable EMAC in MII mode, enable clock ERXCK and ETXCK. */ AT91C_BASE_EMAC->EMAC_USRIO = AT91C_EMAC_CLKEN ; #else /* Enable EMAC in RMII mode, enable RMII clock (50MHz from oscillator on ERFCK). */ AT91C_BASE_EMAC->EMAC_USRIO = AT91C_EMAC_RMII | AT91C_EMAC_CLKEN ; #endif /* End of code supplied by Atmel ------------------------*/ /* Setup the buffers and descriptors. */ prvSetupDescriptors(); /* Load our MAC address into the EMAC. */ prvSetupMACAddress(); /* Are we connected? */ if( prvProbePHY() ) { /* Enable the interrupt! */ portENTER_CRITICAL(); { prvSetupEMACInterrupt(); vPassEMACSemaphore( xSemaphore ); } portEXIT_CRITICAL(); } return xSemaphore; } /*-----------------------------------------------------------*/ long lEMACSend( void ) { static unsigned portBASE_TYPE uxTxBufferIndex = 0; portBASE_TYPE xWaitCycles = 0; long lReturn = pdPASS; char *pcBuffer; /* Is a buffer available? */ while( !( xTxDescriptors[ uxTxBufferIndex ].U_Status.status & AT91C_TRANSMIT_OK ) ) { /* There is no room to write the Tx data to the Tx buffer. Wait a short while, then try again. */ xWaitCycles++; if( xWaitCycles > emacMAX_WAIT_CYCLES ) { /* Give up. */ lReturn = pdFAIL; break; } else { vTaskDelay( emacBUFFER_WAIT_DELAY ); } } /* lReturn will only be pdPASS if a buffer is available. */ if( lReturn == pdPASS ) { /* Copy the headers into the Tx buffer. These will be in the uIP buffer. */ pcBuffer = ( char * ) xTxDescriptors[ uxTxBufferIndex ].addr; memcpy( ( void * ) pcBuffer, ( void * ) uip_buf, emacTOTAL_FRAME_HEADER_SIZE ); /* If there is room, also copy in the application data if any. */ if( ( uip_len > emacTOTAL_FRAME_HEADER_SIZE ) && ( uip_len <= ( ETH_TX_BUFFER_SIZE - emacTOTAL_FRAME_HEADER_SIZE ) ) ) { memcpy( ( void * ) &( pcBuffer[ emacTOTAL_FRAME_HEADER_SIZE ] ), ( void * ) uip_appdata, ( uip_len - emacTOTAL_FRAME_HEADER_SIZE ) ); } /* Send. */ portENTER_CRITICAL(); { if( uxTxBufferIndex >= ( NB_TX_BUFFERS - 1 ) ) { /* Fill out the necessary in the descriptor to get the data sent. */ xTxDescriptors[ uxTxBufferIndex ].U_Status.status = ( uip_len & ( unsigned long ) AT91C_LENGTH_FRAME ) | AT91C_LAST_BUFFER | AT91C_TRANSMIT_WRAP; uxTxBufferIndex = 0; } else { /* Fill out the necessary in the descriptor to get the data sent. */ xTxDescriptors[ uxTxBufferIndex ].U_Status.status = ( uip_len & ( unsigned long ) AT91C_LENGTH_FRAME ) | AT91C_LAST_BUFFER; uxTxBufferIndex++; } AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_TSTART; } portEXIT_CRITICAL(); } return lReturn; } /*-----------------------------------------------------------*/ unsigned long ulEMACPoll( void ) { static unsigned portBASE_TYPE ulNextRxBuffer = 0; unsigned long ulSectionLength = 0, ulLengthSoFar = 0, ulEOF = pdFALSE; char *pcSource; /* Skip any fragments. */ while( ( xRxDescriptors[ ulNextRxBuffer ].addr & AT91C_OWNERSHIP_BIT ) && !( xRxDescriptors[ ulNextRxBuffer ].U_Status.status & AT91C_SOF ) ) { /* Mark the buffer as free again. */ xRxDescriptors[ ulNextRxBuffer ].addr &= ~( AT91C_OWNERSHIP_BIT ); ulNextRxBuffer++; if( ulNextRxBuffer >= NB_RX_BUFFERS ) { ulNextRxBuffer = 0; } } /* Is there a packet ready? */ while( ( xRxDescriptors[ ulNextRxBuffer ].addr & AT91C_OWNERSHIP_BIT ) && !ulSectionLength ) { pcSource = ( char * )( xRxDescriptors[ ulNextRxBuffer ].addr & emacADDRESS_MASK ); ulSectionLength = xRxDescriptors[ ulNextRxBuffer ].U_Status.status & emacRX_LENGTH_FRAME; if( ulSectionLength == 0 ) { /* The frame is longer than the buffer pointed to by this descriptor so copy the entire buffer to uIP - then move onto the next descriptor to get the rest of the frame. */ if( ( ulLengthSoFar + ETH_RX_BUFFER_SIZE ) <= UIP_BUFSIZE ) { memcpy( &( uip_buf[ ulLengthSoFar ] ), pcSource, ETH_RX_BUFFER_SIZE ); ulLengthSoFar += ETH_RX_BUFFER_SIZE; } } else { /* This is the last section of the frame. Copy the section to uIP. */ if( ulSectionLength < UIP_BUFSIZE ) { /* The section length holds the length of the entire frame. ulLengthSoFar holds the length of the frame sections already copied to uIP, so the length of the final section is ulSectionLength - ulLengthSoFar; */ if( ulSectionLength > ulLengthSoFar ) { memcpy( &( uip_buf[ ulLengthSoFar ] ), pcSource, ( ulSectionLength - ulLengthSoFar ) ); } } /* Is this the last buffer for the frame? If not why? */ ulEOF = xRxDescriptors[ ulNextRxBuffer ].U_Status.status & AT91C_EOF; } /* Mark the buffer as free again. */ xRxDescriptors[ ulNextRxBuffer ].addr &= ~( AT91C_OWNERSHIP_BIT ); /* Increment to the next buffer, wrapping if necessary. */ ulNextRxBuffer++; if( ulNextRxBuffer >= NB_RX_BUFFERS ) { ulNextRxBuffer = 0; } } /* If we obtained data but for some reason did not find the end of the frame then discard the data as it must contain an error. */ if( !ulEOF ) { ulSectionLength = 0; } return ulSectionLength; } /*-----------------------------------------------------------*/ static void prvSetupDescriptors(void) { unsigned portBASE_TYPE xIndex; unsigned long ulAddress; /* Initialise xRxDescriptors descriptor. */ for( xIndex = 0; xIndex < NB_RX_BUFFERS; ++xIndex ) { /* Calculate the address of the nth buffer within the array. */ ulAddress = ( unsigned long )( pcRxBuffer + ( xIndex * ETH_RX_BUFFER_SIZE ) ); /* Write the buffer address into the descriptor. The DMA will place the data at this address when this descriptor is being used. Mask off the bottom bits of the address as these have special meaning. */ xRxDescriptors[ xIndex ].addr = ulAddress & emacADDRESS_MASK; } /* The last buffer has the wrap bit set so the EMAC knows to wrap back to the first buffer. */ xRxDescriptors[ NB_RX_BUFFERS - 1 ].addr |= emacRX_WRAP_BIT; /* Initialise xTxDescriptors. */ for( xIndex = 0; xIndex < NB_TX_BUFFERS; ++xIndex ) { /* Calculate the address of the nth buffer within the array. */ ulAddress = ( unsigned long )( pcTxBuffer + ( xIndex * ETH_TX_BUFFER_SIZE ) ); /* Write the buffer address into the descriptor. The DMA will read data from here when the descriptor is being used. */ xTxDescriptors[ xIndex ].addr = ulAddress & emacADDRESS_MASK; xTxDescriptors[ xIndex ].U_Status.status = AT91C_TRANSMIT_OK; } /* The last buffer has the wrap bit set so the EMAC knows to wrap back to the first buffer. */ xTxDescriptors[ NB_TX_BUFFERS - 1 ].U_Status.status = AT91C_TRANSMIT_WRAP | AT91C_TRANSMIT_OK; /* Tell the EMAC where to find the descriptors. */ AT91C_BASE_EMAC->EMAC_RBQP = ( unsigned long ) xRxDescriptors; AT91C_BASE_EMAC->EMAC_TBQP = ( unsigned long ) xTxDescriptors; /* Clear all the bits in the receive status register. */ AT91C_BASE_EMAC->EMAC_RSR = ( AT91C_EMAC_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA ); /* Enable the copy of data into the buffers, ignore broadcasts, and don't copy FCS. */ AT91C_BASE_EMAC->EMAC_NCFGR |= ( AT91C_EMAC_CAF | AT91C_EMAC_NBC | AT91C_EMAC_DRFCS); /* Enable Rx and Tx, plus the stats register. */ AT91C_BASE_EMAC->EMAC_NCR |= ( AT91C_EMAC_TE | AT91C_EMAC_RE | AT91C_EMAC_WESTAT ); } /*-----------------------------------------------------------*/ static void prvSetupMACAddress( void ) { /* Must be written SA1L then SA1H. */ AT91C_BASE_EMAC->EMAC_SA1L = ( ( unsigned long ) cMACAddress[ 3 ] << 24 ) | ( ( unsigned long ) cMACAddress[ 2 ] << 16 ) | ( ( unsigned long ) cMACAddress[ 1 ] << 8 ) | cMACAddress[ 0 ]; AT91C_BASE_EMAC->EMAC_SA1H = ( ( unsigned long ) cMACAddress[ 5 ] << 8 ) | cMACAddress[ 4 ]; } /*-----------------------------------------------------------*/ static void prvSetupEMACInterrupt( void ) { /* Create the semaphore used to trigger the EMAC task. */ vSemaphoreCreateBinary( xSemaphore ); if( xSemaphore ) { /* We start by 'taking' the semaphore so the ISR can 'give' it when the first interrupt occurs. */ xSemaphoreTake( xSemaphore, emacNO_DELAY ); portENTER_CRITICAL(); { /* We want to interrupt on Rx events. */ AT91C_BASE_EMAC->EMAC_IER = AT91C_EMAC_RCOMP; /* Enable the interrupts in the AIC. */ AT91F_AIC_ConfigureIt( AT91C_ID_EMAC, emacINTERRUPT_LEVEL, AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, ( void (*)( void ) ) vEMACISR_Wrapper ); AT91C_BASE_AIC->AIC_IECR = 0x1 << AT91C_ID_EMAC; } portEXIT_CRITICAL(); } } /*-----------------------------------------------------------*/ /* * The following functions are initialisation functions taken from the Atmel * EMAC sample code. */ static portBASE_TYPE prvProbePHY( void ) { unsigned long ulPHYId1, ulPHYId2, ulStatus; portBASE_TYPE xReturn = pdPASS; /* Code supplied by Atmel (reformatted) -----------------*/ /* Enable management port */ AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_MPE; AT91C_BASE_EMAC->EMAC_NCFGR |= ( 2 ) << 10; /* Read the PHY ID. */ vReadPHY( AT91C_PHY_ADDR, MII_PHYSID1, &ulPHYId1 ); vReadPHY( AT91C_PHY_ADDR, MII_PHYSID2, &ulPHYId2 ); /* AMD AM79C875: PHY_ID1 = 0x0022 PHY_ID2 = 0x5541 Bits 3:0 Revision Number Four bit manufacturer’s revision number. 0001 stands for Rev. A, etc. */ if( ( ( ulPHYId1 << 16 ) | ( ulPHYId2 & 0xfff0 ) ) != MII_DM9161_ID ) { /* Did not expect this ID. */ xReturn = pdFAIL; } else { ulStatus = xGetLinkSpeed(); if( ulStatus != pdPASS ) { xReturn = pdFAIL; } } /* Disable management port */ AT91C_BASE_EMAC->EMAC_NCR &= ~AT91C_EMAC_MPE; /* End of code supplied by Atmel ------------------------*/ return xReturn; } /*-----------------------------------------------------------*/ static void vReadPHY( unsigned char ucPHYAddress, unsigned char ucAddress, unsigned long *pulValue ) { /* Code supplied by Atmel (reformatted) ----------------------*/ AT91C_BASE_EMAC->EMAC_MAN = (AT91C_EMAC_SOF & (0x01<<30)) | (2 << 16) | (2 << 28) | ((ucPHYAddress & 0x1f) << 23) | (ucAddress << 18); /* Wait until IDLE bit in Network Status register is cleared. */ while( !( AT91C_BASE_EMAC->EMAC_NSR & AT91C_EMAC_IDLE ) ) { __asm( "NOP" ); } *pulValue = ( AT91C_BASE_EMAC->EMAC_MAN & 0x0000ffff ); /* End of code supplied by Atmel ------------------------*/ } /*-----------------------------------------------------------*/ #if USE_RMII_INTERFACE != 1 static void vWritePHY( unsigned char ucPHYAddress, unsigned char ucAddress, unsigned long ulValue ) { /* Code supplied by Atmel (reformatted) ----------------------*/ AT91C_BASE_EMAC->EMAC_MAN = (( AT91C_EMAC_SOF & (0x01<<30)) | (2 << 16) | (1 << 28) | ((ucPHYAddress & 0x1f) << 23) | (ucAddress << 18)) | (ulValue & 0xffff); /* Wait until IDLE bit in Network Status register is cleared */ while( !( AT91C_BASE_EMAC->EMAC_NSR & AT91C_EMAC_IDLE ) ) { __asm( "NOP" ); }; /* End of code supplied by Atmel ------------------------*/ } #endif /*-----------------------------------------------------------*/ static portBASE_TYPE xGetLinkSpeed( void ) { unsigned long ulBMSR, ulBMCR, ulLPA, ulMACCfg, ulSpeed, ulDuplex; /* Code supplied by Atmel (reformatted) -----------------*/ /* Link status is latched, so read twice to get current value */ vReadPHY(AT91C_PHY_ADDR, MII_BMSR, &ulBMSR); vReadPHY(AT91C_PHY_ADDR, MII_BMSR, &ulBMSR); if( !( ulBMSR & BMSR_LSTATUS ) ) { /* No Link. */ return pdFAIL; } vReadPHY(AT91C_PHY_ADDR, MII_BMCR, &ulBMCR); if (ulBMCR & BMCR_ANENABLE) { /* AutoNegotiation is enabled. */ if (!(ulBMSR & BMSR_ANEGCOMPLETE)) { /* Auto-negotiation in progress. */ return pdFAIL; } vReadPHY(AT91C_PHY_ADDR, MII_LPA, &ulLPA); if( ( ulLPA & LPA_100FULL ) || ( ulLPA & LPA_100HALF ) ) { ulSpeed = SPEED_100; } else { ulSpeed = SPEED_10; } if( ( ulLPA & LPA_100FULL ) || ( ulLPA & LPA_10FULL ) ) { ulDuplex = DUPLEX_FULL; } else { ulDuplex = DUPLEX_HALF; } } else { ulSpeed = ( ulBMCR & BMCR_SPEED100 ) ? SPEED_100 : SPEED_10; ulDuplex = ( ulBMCR & BMCR_FULLDPLX ) ? DUPLEX_FULL : DUPLEX_HALF; } /* Update the MAC */ ulMACCfg = AT91C_BASE_EMAC->EMAC_NCFGR & ~( AT91C_EMAC_SPD | AT91C_EMAC_FD ); if( ulSpeed == SPEED_100 ) { if( ulDuplex == DUPLEX_FULL ) { /* 100 Full Duplex */ AT91C_BASE_EMAC->EMAC_NCFGR = ulMACCfg | AT91C_EMAC_SPD | AT91C_EMAC_FD; } else { /* 100 Half Duplex */ AT91C_BASE_EMAC->EMAC_NCFGR = ulMACCfg | AT91C_EMAC_SPD; } } else { if (ulDuplex == DUPLEX_FULL) { /* 10 Full Duplex */ AT91C_BASE_EMAC->EMAC_NCFGR = ulMACCfg | AT91C_EMAC_FD; } else { /* 10 Half Duplex */ AT91C_BASE_EMAC->EMAC_NCFGR = ulMACCfg; } } /* End of code supplied by Atmel ------------------------*/ return pdPASS; }
Go to most recent revision | Compare with Previous | Blame | View Log