URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ARM7_LPC2129_Keil_RVDS/] [serial/] [serial.c] - Rev 622
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0. Note this driver is used to test the FreeRTOS port. It is NOT intended to be an example of an efficient implementation! */ /* Standard includes. */ #include <stdlib.h> /* Scheduler includes. */ #include "FreeRTOS.h" #include "queue.h" #include "task.h" /* Demo application includes. */ #include "serial.h" /*-----------------------------------------------------------*/ /* Constants to setup and access the UART. */ #define serDLAB ( ( unsigned char ) 0x80 ) #define serENABLE_INTERRUPTS ( ( unsigned char ) 0x03 ) #define serNO_PARITY ( ( unsigned char ) 0x00 ) #define ser1_STOP_BIT ( ( unsigned char ) 0x00 ) #define ser8_BIT_CHARS ( ( unsigned char ) 0x03 ) #define serFIFO_ON ( ( unsigned char ) 0x01 ) #define serCLEAR_FIFO ( ( unsigned char ) 0x06 ) #define serWANTED_CLOCK_SCALING ( ( unsigned long ) 16 ) /* Constants to setup and access the VIC. */ #define serU1VIC_CHANNEL ( ( unsigned long ) 0x0007 ) #define serU1VIC_CHANNEL_BIT ( ( unsigned long ) 0x0080 ) #define serU1VIC_ENABLE ( ( unsigned long ) 0x0020 ) /* Misc. */ #define serINVALID_QUEUE ( ( xQueueHandle ) 0 ) #define serHANDLE ( ( xComPortHandle ) 1 ) #define serNO_BLOCK ( ( portTickType ) 0 ) /* Constant to access the VIC. */ #define serCLEAR_VIC_INTERRUPT ( ( unsigned long ) 0 ) /* Constants to determine the ISR source. */ #define serSOURCE_THRE ( ( unsigned char ) 0x02 ) #define serSOURCE_RX_TIMEOUT ( ( unsigned char ) 0x0c ) #define serSOURCE_ERROR ( ( unsigned char ) 0x06 ) #define serSOURCE_RX ( ( unsigned char ) 0x04 ) #define serINTERRUPT_SOURCE_MASK ( ( unsigned char ) 0x0f ) #define serINTERRUPT_IS_PENDING ( ( unsigned char ) 0x01 ) /*-----------------------------------------------------------*/ /* * The asm wrapper for the interrupt service routine. */ extern void vUART_ISREntry( void ); /* * The C function called from the asm wrapper. */ void vUART_ISRHandler( void ); /*-----------------------------------------------------------*/ /* Queues used to hold received characters, and characters waiting to be transmitted. */ static xQueueHandle xRxedChars; static xQueueHandle xCharsForTx; /* Communication flag between the interrupt service routine and serial API. */ static volatile long lTHREEmpty; /*-----------------------------------------------------------*/ xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength ) { unsigned long ulDivisor, ulWantedClock; xComPortHandle xReturn = serHANDLE; /* Create the queues used to hold Rx and Tx characters. */ xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) ); xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed char ) ); /* Initialise the THRE empty flag. */ lTHREEmpty = pdTRUE; if( ( xRxedChars != serINVALID_QUEUE ) && ( xCharsForTx != serINVALID_QUEUE ) && ( ulWantedBaud != ( unsigned long ) 0 ) ) { portENTER_CRITICAL() { /* Setup the baud rate: Calculate the divisor value. */ ulWantedClock = ulWantedBaud * serWANTED_CLOCK_SCALING; ulDivisor = configCPU_CLOCK_HZ / ulWantedClock; /* Set the DLAB bit so we can access the divisor. */ U1LCR |= serDLAB; /* Setup the divisor. */ U1DLL = ( unsigned char ) ( ulDivisor & ( unsigned long ) 0xff ); ulDivisor >>= 8; U1DLM = ( unsigned char ) ( ulDivisor & ( unsigned long ) 0xff ); /* Turn on the FIFO's and clear the buffers. */ U1FCR = ( serFIFO_ON | serCLEAR_FIFO ); /* Setup transmission format. */ U1LCR = serNO_PARITY | ser1_STOP_BIT | ser8_BIT_CHARS; /* Setup the VIC for the UART. */ VICIntSelect &= ~( serU1VIC_CHANNEL_BIT ); VICIntEnable |= serU1VIC_CHANNEL_BIT; VICVectAddr1 = ( unsigned long ) vUART_ISREntry; VICVectCntl1 = serU1VIC_CHANNEL | serU1VIC_ENABLE; /* Enable UART0 interrupts. */ U1IER |= serENABLE_INTERRUPTS; } portEXIT_CRITICAL(); } else { xReturn = ( xComPortHandle ) 0; } return xReturn; } /*-----------------------------------------------------------*/ signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, portTickType xBlockTime ) { /* The port handle is not required as this driver only supports UART0. */ ( void ) pxPort; /* Get the next character from the buffer. Return false if no characters are available, or arrive before xBlockTime expires. */ if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) ) { return pdTRUE; } else { return pdFALSE; } } /*-----------------------------------------------------------*/ void vSerialPutString( xComPortHandle pxPort, const signed char * const pcString, unsigned short usStringLength ) { signed char *pxNext; /* NOTE: This implementation does not handle the queue being full as no block time is used! */ /* The port handle is not required as this driver only supports UART0. */ ( void ) pxPort; ( void ) usStringLength; /* Send each character in the string, one at a time. */ pxNext = ( signed char * ) pcString; while( *pxNext ) { xSerialPutChar( pxPort, *pxNext, serNO_BLOCK ); pxNext++; } } /*-----------------------------------------------------------*/ signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, portTickType xBlockTime ) { signed portBASE_TYPE xReturn; /* The port handle is not required as this driver only supports UART0. */ ( void ) pxPort; portENTER_CRITICAL(); { /* Is there space to write directly to the UART? */ if( lTHREEmpty == ( long ) pdTRUE ) { /* We wrote the character directly to the UART, so was successful. */ lTHREEmpty = pdFALSE; U1THR = cOutChar; xReturn = pdPASS; } else { /* We cannot write directly to the UART, so queue the character. Block for a maximum of xBlockTime if there is no space in the queue. It is ok to block within a critical section as each task has it's own critical section management. */ xReturn = xQueueSend( xCharsForTx, &cOutChar, xBlockTime ); /* Depending on queue sizing and task prioritisation: While we were blocked waiting to post interrupts were not disabled. It is possible that the serial ISR has emptied the Tx queue, in which case we need to start the Tx off again. */ if( lTHREEmpty == ( long ) pdTRUE ) { xQueueReceive( xCharsForTx, &cOutChar, serNO_BLOCK ); lTHREEmpty = pdFALSE; U1THR = cOutChar; } } } portEXIT_CRITICAL(); return xReturn; } /*-----------------------------------------------------------*/ void vUART_ISRHandler( void ) { signed char cChar; portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE; unsigned char ucInterrupt; ucInterrupt = U1IIR; /* The interrupt pending bit is active low. */ while( ( ucInterrupt & serINTERRUPT_IS_PENDING ) == 0 ) { /* What caused the interrupt? */ switch( ucInterrupt & serINTERRUPT_SOURCE_MASK ) { case serSOURCE_ERROR : /* Not handling this, but clear the interrupt. */ cChar = U1LSR; break; case serSOURCE_THRE : /* The THRE is empty. If there is another character in the Tx queue, send it now. */ if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE ) { U1THR = cChar; } else { /* There are no further characters queued to send so we can indicate that the THRE is available. */ lTHREEmpty = pdTRUE; } break; case serSOURCE_RX_TIMEOUT : case serSOURCE_RX : /* A character was received. Place it in the queue of received characters. */ cChar = U1RBR; xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken ); break; default : /* There is nothing to do, leave the ISR. */ break; } ucInterrupt = U1IIR; } /* Clear the ISR in the VIC. */ VICVectAddr = serCLEAR_VIC_INTERRUPT; /* Exit the ISR. If a task was woken by either a character being received or transmitted then a context switch will occur. */ portEXIT_SWITCHING_ISR( xHigherPriorityTaskWoken ); } /*-----------------------------------------------------------*/
Go to most recent revision | Compare with Previous | Blame | View Log