URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ARM9_AT91SAM9XE_IAR/] [ewp/] [at91sam9xe-ek-flash.mac] - Rev 594
Go to most recent revision | Compare with Previous | Blame | View Log
// ---------------------------------------------------------
// ATMEL Microcontroller Software Support - ROUSSET -
// ---------------------------------------------------------
// The software is delivered "AS IS" without warranty or
// condition of any kind, either express, implied or
// statutory. This includes without limitation any warranty
// or condition with respect to merchantability or fitness
// for any particular purpose, or against the infringements of
// intellectual property rights of others.
// ---------------------------------------------------------
// File: SAM9XE_FLASH.mac
// User setup file for CSPY debugger.
// 1.1 08/Aug/06 jpp : Creation
//
// $Revision: 2 $
//
// ---------------------------------------------------------
__var __mac_i;
__var __mac_pt;
/*********************************************************************
*
* execUserReset() : JTAG set initially to Full Speed
*/
execUserReset()
{
__message "------------------------------ execUserReset ---------------------------------";
__writeMemory32(0x00000500, 0xFFFFFA00, "Memory"); // Set flash wait states
__PllSetting(); //* Init PLL
__PllSetting100MHz();
__message "-------------------------------Set PC Reset ----------------------------------";
}
/*********************************************************************
*
* execUserPreload() : JTAG set initially to 32kHz
*/
execUserPreload()
{
__message "------------------------------ execUserPreload ---------------------------------";
__hwReset(0); //* Hardware Reset: CPU is automatically halted after the reset (JTAG is already configured to 32kHz)
__writeMemory32(0xD3,0x98,"Register"); //* Set CPSR
__writeMemory32(0x00000500, 0xFFFFFA00, "Memory"); // Set flash wait states
__PllSetting(); //* Init PLL
__PllSetting100MHz();
_InitRSTC(); //* Enable User Reset to allow execUserReset() execution
}
/*********************************************************************
*
* _InitRSTC()
*
* Function description
* Initializes the RSTC (Reset controller).
* This makes sense since the default is to not allow user resets, which makes it impossible to
* apply a second RESET via J-Link
*/
_InitRSTC() {
__writeMemory32(0xA5000001, 0xFFFFFD08,"Memory"); // Allow user reset
}
/*********************************************************************
*
* __PllSetting()
* Function description
* Initializes the PMC.
* 1. Enable the Main Oscillator
* 2. Configure PLL
* 3. Switch Master
*/
__PllSetting()
{
if ((__readMemory32(0xFFFFFC30,"Memory")&0x3) != 0 ) {
//* Disable all PMC interrupt ( $$ JPP)
//* AT91C_PMC_IDR ((AT91_REG *) 0xFFFFFC64) //(PMC) Interrupt Disable Register
//* pPmc->PMC_IDR = 0xFFFFFFFF;
__writeMemory32(0xFFFFFFFF,0xFFFFFC64,"Memory");
//* AT91C_PMC_PCDR ((AT91_REG *) 0xFFFFFC14) //(PMC) Peripheral Clock Disable Register
__writeMemory32(0xFFFFFFFF,0xFFFFFC14,"Memory");
// Disable all clock only Processor clock is enabled.
__writeMemory32(0xFFFFFFFE,0xFFFFFC04,"Memory");
// AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register
__writeMemory32(0x00000001,0xFFFFFC30,"Memory");
__sleep(10000);
// write reset value to PLLA and PLLB
// AT91C_PMC_PLLAR ((AT91_REG *) 0xFFFFFC28) // (PMC) PLL A Register
__writeMemory32(0x00003F00,0xFFFFFC28,"Memory");
// AT91C_PMC_PLLBR ((AT91_REG *) 0xFFFFFC2C) // (PMC) PLL B Register
__writeMemory32(0x00003F00,0xFFFFFC2C,"Memory");
__sleep(10000);
__message "------------------------------- PLL Enable -----------------------------------------";
} else {
__message " ********* Core in SLOW CLOCK mode ********* "; }
}
/*********************************************************************
*
* __PllSetting100MHz()
* Function description
* Set core at 200 MHz and MCK at 100 MHz
*/
__PllSetting100MHz()
{
__message "------------------------------- PLL Set at 100 MHz ----------------------------------";
//* pPmc->PMC_MOR = (( AT91C_CKGR_OSCOUNT & (0x40 <<8) | AT91C_CKGR_MOSCEN ));
__writeMemory32(0x00004001,0xFFFFFC20,"Memory");
__sleep(10000);
// AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register
__writeMemory32(0x00000001,0xFFFFFC30,"Memory");
__sleep(10000);
//* AT91C_BASE_CKGR->CKGR_PLLAR = (AT91C_CKGR_SRCA | ((96 << 16) & AT91C_CKGR_MULA) |
// (AT91C_CKGR_PLLACOUNT | (AT91C_CKGR_OUTA_0 | (9);
__writeMemory32(0x2060BF09,0xFFFFFC28,"Memory");
__sleep(10000);
//* AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2;;
__writeMemory32(0x00000102,0xFFFFFC30,"Memory");
__sleep(10000);
}
Go to most recent revision | Compare with Previous | Blame | View Log