URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ARM9_AT91SAM9XE_IAR/] [ewp/] [at91sam9xe-ek.ewp] - Rev 593
Go to most recent revision | Compare with Previous | Blame | View Log
<?xml version="1.0" encoding="iso-8859-1"?>
<project>
<fileVersion>2</fileVersion>
<configuration>
<name>AT91SAM9XE512_SDRAM_ARM</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>1</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>17</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>ExePath</name>
<state>AT91SAM9XE512_SDRAM_ARM\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>AT91SAM9XE512_SDRAM_ARM\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>AT91SAM9XE512_SDRAM_ARM\List</state>
</option>
<option>
<name>Variant</name>
<version>11</version>
<state>12</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input variant</name>
<version>1</version>
<state>3</state>
</option>
<option>
<name>Input description</name>
<state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
</option>
<option>
<name>Output variant</name>
<version>0</version>
<state>2</state>
</option>
<option>
<name>Output description</name>
<state>No specifier a, A, no specifier n, no float nor long long.</state>
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>FPU</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>2</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>2</state>
</option>
<option>
<name>RTDescription</name>
<state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
</option>
<option>
<name>RTConfigPath</name>
<state>$TOOLKIT_DIR$\INC\DLib_Config_Full.h</state>
</option>
<option>
<name>OGProductVersion</name>
<state>4.30A</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>5.30.0.51160</state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>at91sam9xe512 Atmel at91sam9xe512</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>0</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>0</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>21</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>CCDefines</name>
<state>at91sam9xe128</state>
<state>flash</state>
<state>SAM9XE_IAR</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>1</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>1</state>
</option>
<option>
<name>CCListCMessages</name>
<state>1</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>1</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state>Pe826,Pe1375,Pa082</state>
</option>
<option>
<name>CCDiagRemark</name>
<state></state>
</option>
<option>
<name>CCDiagWarning</name>
<state></state>
</option>
<option>
<name>CCDiagError</name>
<state></state>
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>0000000</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>1</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state></state>
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>CCLangSelect</name>
<state>0</state>
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state></state>
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\components</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\usb</state>
<state>$PROJ_DIR$\..\..\..\Source\include</state>
<state>$PROJ_DIR$\..</state>
<state>$PROJ_DIR$\..\..\Common\include</state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCStdIncludePath</name>
<state>$TOOLKIT_DIR$\INC\</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IInterwork2</name>
<state>0</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>0</state>
</option>
<option>
<name>CCOptLevel</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>0</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>7</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state></state>
</option>
<option>
<name>AWarnRange1</name>
<state></state>
</option>
<option>
<name>AWarnRange2</name>
<state></state>
</option>
<option>
<name>ADebug</name>
<state>1</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state>at91sam9xe512</state>
<state>sdram</state>
</option>
<option>
<name>AList</name>
<state>1</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>AMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AStdIncludes</name>
<state>$TOOLKIT_DIR$\INC\</state>
</option>
<option>
<name>AUserIncludes</name>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek</state>
<state>$PROJ_DIR$\..\..\..\Source\portable\IAR\AtmelSAM9XE</state>
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state></state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OOCOutputFormat</name>
<version>2</version>
<state>2</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>1</state>
</option>
<option>
<name>OOCOutputFile</name>
<state>at91sam9xe512_sdram.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions></extensions>
<cmdline></cmdline>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild></prebuild>
<postbuild></postbuild>
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>8</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>at91sam9xe512_sdram.out</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state></state>
</option>
<option>
<name>IlinkDefines</name>
<state></state>
</option>
<option>
<name>IlinkConfigDefines</name>
<state></state>
</option>
<option>
<name>IlinkMapFile</name>
<state>1</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>1</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>$PROJ_DIR$\sdram.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state></state>
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state>Lp005,Lp006</state>
</option>
<option>
<name>IlinkTreatAsRem</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsErr</name>
<state></state>
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state></state>
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state></state>
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>1</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state>resetHandler</state>
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcAlgo</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IarchiveInputs</name>
<state></state>
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
</configuration>
<configuration>
<name>AT91SAM9XE512_SDRAM_THUMB</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>1</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>17</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>ExePath</name>
<state>AT91SAM9XE512_SDRAM_THUMB\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>AT91SAM9XE512_SDRAM_THUMB\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>AT91SAM9XE512_SDRAM_THUMB\List</state>
</option>
<option>
<name>Variant</name>
<version>11</version>
<state>12</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input variant</name>
<version>1</version>
<state>3</state>
</option>
<option>
<name>Input description</name>
<state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
</option>
<option>
<name>Output variant</name>
<version>0</version>
<state>2</state>
</option>
<option>
<name>Output description</name>
<state>No specifier a, A, no specifier n, no float nor long long.</state>
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>FPU</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>2</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>2</state>
</option>
<option>
<name>RTDescription</name>
<state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
</option>
<option>
<name>RTConfigPath</name>
<state>$TOOLKIT_DIR$\INC\DLib_Config_Full.h</state>
</option>
<option>
<name>OGProductVersion</name>
<state>4.30A</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>5.30.0.51236</state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>at91sam9xe512 Atmel at91sam9xe512</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>0</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>0</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>21</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>CCDefines</name>
<state>at91sam9xe128</state>
<state>flash</state>
<state>SAM9XE_IAR</state>
<state>THUMB_INTERWORK</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>1</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>1</state>
</option>
<option>
<name>CCListCMessages</name>
<state>1</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>1</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state>Pe826,Pe1375,Pa082</state>
</option>
<option>
<name>CCDiagRemark</name>
<state></state>
</option>
<option>
<name>CCDiagWarning</name>
<state></state>
</option>
<option>
<name>CCDiagError</name>
<state></state>
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>0000000</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>1</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state></state>
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>CCLangSelect</name>
<state>0</state>
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state></state>
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\components</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\usb</state>
<state>$PROJ_DIR$\..\..\..\Source\include</state>
<state>$PROJ_DIR$\..</state>
<state>$PROJ_DIR$\..\..\Common\include</state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCStdIncludePath</name>
<state>$TOOLKIT_DIR$\INC\</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IInterwork2</name>
<state>0</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>0</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>7</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state></state>
</option>
<option>
<name>AWarnRange1</name>
<state></state>
</option>
<option>
<name>AWarnRange2</name>
<state></state>
</option>
<option>
<name>ADebug</name>
<state>1</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state>at91sam9xe512</state>
<state>sdram</state>
</option>
<option>
<name>AList</name>
<state>1</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>AMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AStdIncludes</name>
<state>$TOOLKIT_DIR$\INC\</state>
</option>
<option>
<name>AUserIncludes</name>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals</state>
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek</state>
<state>$PROJ_DIR$\..\..\..\Source\portable\IAR\AtmelSAM9XE</state>
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state></state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OOCOutputFormat</name>
<version>2</version>
<state>2</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>1</state>
</option>
<option>
<name>OOCOutputFile</name>
<state>at91sam9xe512_sdram.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions></extensions>
<cmdline></cmdline>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild></prebuild>
<postbuild></postbuild>
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>8</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>at91sam9xe512_sdram.out</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state></state>
</option>
<option>
<name>IlinkDefines</name>
<state></state>
</option>
<option>
<name>IlinkConfigDefines</name>
<state></state>
</option>
<option>
<name>IlinkMapFile</name>
<state>1</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>1</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>$PROJ_DIR$\sdram.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state></state>
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state>Lp005,Lp006</state>
</option>
<option>
<name>IlinkTreatAsRem</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsErr</name>
<state></state>
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state></state>
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state></state>
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>1</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state>resetHandler</state>
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcAlgo</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IarchiveInputs</name>
<state></state>
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
</configuration>
<group>
<name>at91lib</name>
<group>
<name>boards</name>
<group>
<name>at91sam9xe-ek</name>
<group>
<name>at91sam9xe128</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe128\AT91SAM9XE128.h</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe128\flash.icf</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe128\sdram.icf</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe128\sram.icf</name>
</file>
</group>
<group>
<name>at91sam9xe256</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe256\AT91SAM9XE256.h</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe256\flash.icf</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe256\sdram.icf</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe256\sram.icf</name>
</file>
</group>
<group>
<name>at91sam9xe512</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe512\AT91SAM9XE512.h</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe512\flash.icf</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe512\sdram.icf</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe512\sram.icf</name>
</file>
</group>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board.h</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board_cstartup_iar.s</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board_lowlevel.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board_memories.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board_memories.h</name>
</file>
</group>
</group>
<group>
<name>peripherals</name>
<group>
<name>aic</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\aic\aic.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\aic\aic.h</name>
</file>
</group>
<group>
<name>dbgu</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\dbgu\dbgu.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\dbgu\dbgu.h</name>
</file>
</group>
<group>
<name>pio</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pio\pio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pio\pio.h</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pio\pio_it.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pio\pio_it.h</name>
</file>
</group>
<group>
<name>pit</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pit\pit.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pit\pit.h</name>
</file>
</group>
<group>
<name>PMC</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pmc\pmc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pmc\pmc.h</name>
</file>
</group>
<group>
<name>tc</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\tc\tc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\tc\tc.h</name>
</file>
</group>
<group>
<name>usart</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\usart\usart.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\usart\usart.h</name>
</file>
</group>
</group>
<group>
<name>utility</name>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility\assert.h</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility\led.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility\led.h</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility\trace.h</name>
</file>
</group>
</group>
<group>
<name>resources</name>
<file>
<name>$PROJ_DIR$\..\..\..\resources\at91sam9xe-ek-flash.mac</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\resources\at91sam9xe-ek-sdram.mac</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\resources\at91sam9xe-ek-sram.mac</name>
</file>
</group>
<group>
<name>scheduler_source</name>
<file>
<name>$PROJ_DIR$\..\..\..\Source\portable\MemMang\heap_3.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\Source\list.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\Source\portable\IAR\AtmelSAM9XE\port.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\Source\portable\IAR\AtmelSAM9XE\portasm.s79</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\Source\queue.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\Source\tasks.c</name>
</file>
</group>
<group>
<name>standard_demo_source</name>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\BlockQ.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\blocktim.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\comtest.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\countsem.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\death.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\dynamic.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\flash.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\GenQTest.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\integer.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\PollQ.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\QPeek.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\recmutex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\Common\Minimal\semtest.c</name>
</file>
</group>
<file>
<name>$PROJ_DIR$\..\main.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\ParTest\ParTest.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\serial\serial.c</name>
</file>
</project>
Go to most recent revision | Compare with Previous | Blame | View Log