OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_AT91SAM3U256_IAR/] [system/] [led.c] - Rev 590

Go to most recent revision | Compare with Previous | Blame | View Log

/* ----------------------------------------------------------------------------
 *         ATMEL Microcontroller Software Support 
 * ----------------------------------------------------------------------------
 * Copyright (c) 2008, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */
 
//------------------------------------------------------------------------------
//         Headers
//------------------------------------------------------------------------------
 
#include "led.h"
#include <board.h>
#include <pio/pio.h>
 
//------------------------------------------------------------------------------
//         Local Variables
//------------------------------------------------------------------------------
 
#ifdef PINS_LEDS
static const Pin pinsLeds[] = {PINS_LEDS};
static const unsigned int numLeds = PIO_LISTSIZE(pinsLeds);
#endif
 
//------------------------------------------------------------------------------
//         Global Functions
//------------------------------------------------------------------------------
 
//------------------------------------------------------------------------------
/// Configures the pin associated with the given LED number. If the LED does
/// not exist on the board, the function does nothing.
/// \param led  Number of the LED to configure.
/// \return 1 if the LED exists and has been configured; otherwise 0.
//------------------------------------------------------------------------------
unsigned char LED_Configure(unsigned int led)
{
#ifdef PINS_LEDS
    // Check that LED exists
    if (led >= numLeds) {
 
        return 0;
    }
 
    // Configure LED
    return (PIO_Configure(&pinsLeds[led], 1));
#else
    return 0;
#endif
}
 
//------------------------------------------------------------------------------
/// Turns the given LED on if it exists; otherwise does nothing.
/// \param led  Number of the LED to turn on.
/// \return 1 if the LED has been turned on; 0 otherwise.
//------------------------------------------------------------------------------
unsigned char LED_Set(unsigned int led)
{
#ifdef PINS_LEDS
    // Check if LED exists
    if (led >= numLeds) {
 
        return 0;
    }
 
    // Turn LED on
    if (pinsLeds[led].type == PIO_OUTPUT_0) {
 
        PIO_Set(&pinsLeds[led]);
    }
    else {
 
        PIO_Clear(&pinsLeds[led]);
    }
 
    return 1;
#else
    return 0;
#endif
}
 
//------------------------------------------------------------------------------
/// Turns a LED off.
/// \param led  Number of the LED to turn off.
/// \param 1 if the LED has been turned off; 0 otherwise.
//------------------------------------------------------------------------------
unsigned char LED_Clear(unsigned int led)
{
#ifdef PINS_LEDS
    // Check if LED exists
    if (led >= numLeds) {
 
        return 0;
    }
 
    // Turn LED off
    if (pinsLeds[led].type == PIO_OUTPUT_0) {
 
        PIO_Clear(&pinsLeds[led]);
    }
    else {
 
        PIO_Set(&pinsLeds[led]);
    }
 
    return 1;
#else
    return 0;
#endif
}
 
//------------------------------------------------------------------------------
/// Toggles the current state of a LED.
/// \param led  Number of the LED to toggle.
/// \return 1 if the LED has been toggled; otherwise 0.
//------------------------------------------------------------------------------
unsigned char LED_Toggle(unsigned int led)
{
#ifdef PINS_LEDS
    // Check if LED exists
    if (led >= numLeds) {
 
        return 0;
    }
 
    // Toggle LED
    if (PIO_GetOutputDataStatus(&pinsLeds[led])) {
 
        PIO_Clear(&pinsLeds[led]);
    }
    else {
 
        PIO_Set(&pinsLeds[led]);
    }
 
    return 1;
#else
    return 0;
#endif
}
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.