URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_LM3S102_KEIL/] [init/] [Startup.s] - Rev 609
Go to most recent revision | Compare with Previous | Blame | View Log
;/*****************************************************************************/ ;/* STARTUP.S: Startup file for Luminary Micro LM3Sxxx */ ;/*****************************************************************************/ ;/* <<< Use Configuration Wizard in Context Menu >>> */ ;/*****************************************************************************/ ;/* This file is part of the uVision/ARM development tools. */ ;/* Copyright (c) 2005-2006 Keil Software. All rights reserved. */ ;/* This software may only be used under the terms of a valid, current, */ ;/* end user licence from KEIL for a compatible version of KEIL software */ ;/* development tools. Nothing else gives you the right to use this software. */ ;/*****************************************************************************/ ;/* ; * The STARTUP.S code is executed after CPU Reset. ; */ ;// <h> Stack Configuration ;// <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> ;// </h> Stack_Size EQU 51 AREA STACK, NOINIT, READWRITE, ALIGN=3 Stack_Mem SPACE Stack_Size ;// <h> Heap Configuration ;// <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> ;// </h> Heap_Size EQU 0x00000000 AREA HEAP, NOINIT, READWRITE, ALIGN=3 Heap_Mem SPACE Heap_Size ; System Control Register Addresses SYSCTL_BASE EQU 0x400FE000 ; System Control Base Address PBORCTL_OFS EQU 0x0030 ; Power-On & Brown-Out Reset Control LDOPC_OFS EQU 0x0034 ; LDO Power SRCR0_OFS EQU 0x0040 ; Software Reset Control 0 SRCR1_OFS EQU 0x0044 ; Software Reset Control 1 SRCR2_OFS EQU 0x0048 ; Software Reset Control 2 RCC_OFS EQU 0x0060 ; Run-Mode Clock Control RCGC0_OFS EQU 0x0100 ; Run-Mode Clock Gating Control 0 RCGC1_OFS EQU 0x0104 ; Run-Mode Clock Gating Control 1 RCGC2_OFS EQU 0x0108 ; Run-Mode Clock Gating Control 2 SCGC0_OFS EQU 0x0110 ; Sleep-Mode Clock Gating Control 0 SCGC1_OFS EQU 0x0114 ; Sleep-Mode Clock Gating Control 1 SCGC2_OFS EQU 0x0118 ; Sleep-Mode Clock Gating Control 2 DCGC0_OFS EQU 0x0120 ; Deep-Sleep-Mode Clock Gating Control 0 DCGC1_OFS EQU 0x0124 ; Deep-Sleep-Mode Clock Gating Control 1 DCGC2_OFS EQU 0x0128 ; Deep-Sleep-Mode Clock Gating Control 2 PRESERVE8 ; Area Definition and Entry Point ; Startup Code must be linked first at Address 0. AREA RESET, CODE, READONLY THUMB IMPORT xPortPendSVHandler IMPORT xPortSysTickHandler IMPORT vUART_ISR IMPORT vPortSVCHandler ; Vector Table EXPORT __Vectors __Vectors DCD Stack_Mem + Stack_Size ; Top of Stack DCD Reset_Handler ; Reset Handler DCD NmiSR ; NMI Handler DCD DefaultISR ; Hard Fault Handler DCD DefaultISR ; MPU Fault Handler DCD DefaultISR ; Bus Fault Handler DCD DefaultISR ; Usage Fault Handler DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD vPortSVCHandler ; SVCall Handler DCD DefaultISR ; Debug Monitor Handler DCD 0 ; Reserved DCD xPortPendSVHandler ; PendSV Handler DCD xPortSysTickHandler ; SysTick Handler DCD DefaultISR ; GPIO Port A Handler DCD DefaultISR ; GPIO Port B Handler DCD DefaultISR ; GPIO Port C Handler DCD DefaultISR ; GPIO Port D Handler DCD DefaultISR ; GPIO Port E Handler DCD vUART_ISR ; UART0 Rx/Tx Handler DCD DefaultISR ; UART1 Rx/Tx Handler DCD DefaultISR ; SSI Rx/Tx Handler DCD DefaultISR ; I2C Master/Slave Handler DCD DefaultISR ; PWM Fault Handler DCD DefaultISR ; PWM Generator 0 Handler DCD DefaultISR ; PWM Generator 1 Handler DCD DefaultISR ; PWM Generator 2 Handler DCD DefaultISR ; Quadrature Encoder Handler DCD DefaultISR ; ADC Sequence 0 Handler DCD DefaultISR ; ADC Sequence 1 Handler DCD DefaultISR ; ADC Sequence 2 Handler DCD DefaultISR ; ADC Sequence 3 Handler DCD DefaultISR ; Watchdog Timer Handler DCD DefaultISR ; Timer 0 Subtimer A Handler DCD DefaultISR ; Timer 0 Subtimer B Handler DCD DefaultISR ; Timer 1 Subtimer A Handler DCD DefaultISR ; Timer 1 Subtimer B Handler DCD DefaultISR ; Timer 2 Subtimer A Handler DCD DefaultISR ; Timer 2 Subtimer B Handler DCD DefaultISR ; Analog Comparator 0 Handler DCD DefaultISR ; Analog Comparator 1 Handler DCD DefaultISR ; Analog Comparator 2 Handler DCD DefaultISR ; System Control Handler DCD DefaultISR ; Flash Control Handler ; Dummy Handlers are implemented as infinite loops which can be modified. NmiSR B NmiSR FaultISR B FaultISR EXPORT FaultISR DefaultISR B DefaultISR ; Reset Handler EXPORT Reset_Handler Reset_Handler ; Enable Clock Gating for Peripherals ; LDR R0, =SYSCTL_BASE ; System Control Base Address ; MVN R1, #0 ; Value 0xFFFFFFFF ; STR R1, [R0,#RCGC0_OFS] ; Run-Mode Clock Gating Ctrl 0 ; STR R1, [R0,#RCGC1_OFS] ; Run-Mode Clock Gating Ctrl 1 ; STR R1, [R0,#RCGC2_OFS] ; Run-Mode Clock Gating Ctrl 2 ; Enter the C code IMPORT __main LDR R0, =__main BX R0 ; User Initial Stack & Heap AREA |.text|, CODE, READONLY IMPORT __use_two_region_memory EXPORT __user_initial_stackheap __user_initial_stackheap LDR R0, = Heap_Mem LDR R1, =(Stack_Mem + Stack_Size) LDR R2, = (Heap_Mem + Heap_Size) LDR R3, = Stack_Mem BX LR ALIGN END
Go to most recent revision | Compare with Previous | Blame | View Log