URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_LM3S811_GCC/] [hw_include/] [i2c.h] - Rev 581
Compare with Previous | Blame | View Log
//***************************************************************************** // // i2c.h - Prototypes for the I2C Driver. // // Copyright (c) 2005,2006 Luminary Micro, Inc. All rights reserved. // // Software License Agreement // // Luminary Micro, Inc. (LMI) is supplying this software for use solely and // exclusively on LMI's Stellaris Family of microcontroller products. // // The software is owned by LMI and/or its suppliers, and is protected under // applicable copyright laws. All rights are reserved. Any use in violation // of the foregoing restrictions may subject the user to criminal sanctions // under applicable laws, as well as to civil liability for the breach of the // terms and conditions of this license. // // THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED // OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF // MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. // LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR // CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 991 of the Stellaris Driver Library. // //***************************************************************************** #ifndef __I2C_H__ #define __I2C_H__ #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // // Defines for the API. // //***************************************************************************** //***************************************************************************** // // Interrupt defines. // //***************************************************************************** #define I2C_INT_MASTER 0x00000001 #define I2C_INT_SLAVE 0x00000002 //***************************************************************************** // // I2C Master commands. // //***************************************************************************** #define I2C_MASTER_CMD_SINGLE_SEND \ (I2C_MASTER_CS_STOP | I2C_MASTER_CS_START | I2C_MASTER_CS_RUN) #define I2C_MASTER_CMD_SINGLE_RECEIVE \ (I2C_MASTER_CS_STOP | I2C_MASTER_CS_START | I2C_MASTER_CS_RUN) #define I2C_MASTER_CMD_BURST_SEND_START \ (I2C_MASTER_CS_START | I2C_MASTER_CS_RUN) #define I2C_MASTER_CMD_BURST_SEND_CONT \ (I2C_MASTER_CS_RUN) #define I2C_MASTER_CMD_BURST_SEND_FINISH \ (I2C_MASTER_CS_STOP | I2C_MASTER_CS_RUN) #define I2C_MASTER_CMD_BURST_SEND_ERROR_STOP \ (I2C_MASTER_CS_STOP) #define I2C_MASTER_CMD_BURST_RECEIVE_START \ (I2C_MASTER_CS_ACK | I2C_MASTER_CS_START | I2C_MASTER_CS_RUN) #define I2C_MASTER_CMD_BURST_RECEIVE_CONT \ (I2C_MASTER_CS_ACK | I2C_MASTER_CS_RUN) #define I2C_MASTER_CMD_BURST_RECEIVE_FINISH \ (I2C_MASTER_CS_STOP | I2C_MASTER_CS_RUN) #define I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP \ (I2C_MASTER_CS_STOP | I2C_MASTER_CS_RUN) //***************************************************************************** // // I2C Master error status. // //***************************************************************************** #define I2C_MASTER_ERR_NONE 0 #define I2C_MASTER_ERR_ADDR_ACK 0x00000004 #define I2C_MASTER_ERR_DATA_ACK 0x00000008 #define I2C_MASTER_ERR_ARB_LOST 0x00000010 //***************************************************************************** // // I2C Slave action requests // //***************************************************************************** #define I2C_SLAVE_ACT_NONE 0 #define I2C_SLAVE_ACT_RREQ 0x00000001 // Master has sent data #define I2C_SLAVE_ACT_TREQ 0x00000002 // Master has requested data //***************************************************************************** // Miscellaneous I2C driver definitions. //***************************************************************************** #define I2C_MASTER_MAX_RETRIES 1000 // Number of retries //***************************************************************************** // // Prototypes for the APIs. // //***************************************************************************** extern void I2CIntRegister(unsigned long ulBase, void(fnHandler)(void)); extern void I2CIntUnregister(unsigned long ulBase); extern tBoolean I2CMasterBusBusy(unsigned long ulBase); extern tBoolean I2CMasterBusy(unsigned long ulBase); extern void I2CMasterControl(unsigned long ulBase, unsigned long ulCmd); extern unsigned long I2CMasterDataGet(unsigned long ulBase); extern void I2CMasterDataPut(unsigned long ulBase, unsigned char ucData); extern void I2CMasterDisable(unsigned long ulBase); extern void I2CMasterEnable(unsigned long ulBase); extern unsigned long I2CMasterErr(unsigned long ulBase); extern void I2CMasterInit(unsigned long ulBase, tBoolean bFast); extern void I2CMasterIntClear(unsigned long ulBase); extern void I2CMasterIntDisable(unsigned long ulBase); extern void I2CMasterIntEnable(unsigned long ulBase); extern tBoolean I2CMasterIntStatus(unsigned long ulBase, tBoolean bMasked); extern void I2CMasterSlaveAddrSet(unsigned long ulBase, unsigned char ucSlaveAddr, tBoolean bReceive); extern unsigned long I2CSlaveDataGet(unsigned long ulBase); extern void I2CSlaveDataPut(unsigned long ulBase, unsigned char ucData); extern void I2CSlaveDisable(unsigned long ulBase); extern void I2CSlaveEnable(unsigned long ulBase); extern void I2CSlaveInit(unsigned long ulBase, unsigned char ucSlaveAddr); extern void I2CSlaveIntClear(unsigned long ulBase); extern void I2CSlaveIntDisable(unsigned long ulBase); extern void I2CSlaveIntEnable(unsigned long ulBase); extern tBoolean I2CSlaveIntStatus(unsigned long ulBase, tBoolean bMasked); extern unsigned long I2CSlaveStatus(unsigned long ulBase); #ifdef __cplusplus } #endif #endif // __I2C_H__