URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_LM3Sxxxx_Eclipse/] [RTOSDemo/] [webserver/] [emac.c] - Rev 606
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /* Kernel includes. */ #include "FreeRTOS.h" #include "semphr.h" #include "task.h" /* Demo includes. */ #include "emac.h" /* uIP includes. */ #include "uip.h" /* Hardware library includes. */ #include "hw_types.h" #include "hw_memmap.h" #include "hw_ints.h" #include "hw_ethernet.h" #include "ethernet.h" #include "interrupt.h" #define emacNUM_RX_BUFFERS 5 #define emacFRAM_SIZE_BYTES 2 #define macNEGOTIATE_DELAY 2000 #define macWAIT_SEND_TIME ( 10 ) /* The task that handles the MAC peripheral. This is created at a high priority and is effectively a deferred interrupt handler. The peripheral handling is deferred to a task to prevent the entire FIFO having to be read from within an ISR. */ void vMACHandleTask( void *pvParameters ); /*-----------------------------------------------------------*/ /* The semaphore used to wake the uIP task when data arrives. */ xSemaphoreHandle xEMACSemaphore = NULL; /* The semaphore used to wake the interrupt handler task. The peripheral is processed at the task level to prevent the need to read the entire FIFO from within the ISR itself. */ xSemaphoreHandle xMACInterruptSemaphore = NULL; /* The buffer used by the uIP stack. In this case the pointer is used to point to one of the Rx buffers. */ unsigned portCHAR *uip_buf; /* Buffers into which Rx data is placed. */ static unsigned portCHAR ucRxBuffers[ emacNUM_RX_BUFFERS ][ UIP_BUFSIZE + ( 4 * emacFRAM_SIZE_BYTES ) ]; /* The length of the data within each of the Rx buffers. */ static unsigned portLONG ulRxLength[ emacNUM_RX_BUFFERS ]; /* Used to keep a track of the number of bytes to transmit. */ static unsigned portLONG ulNextTxSpace; /*-----------------------------------------------------------*/ portBASE_TYPE vInitEMAC( void ) { unsigned long ulTemp; portBASE_TYPE xReturn; /* Ensure all interrupts are disabled. */ EthernetIntDisable( ETH_BASE, ( ETH_INT_PHY | ETH_INT_MDIO | ETH_INT_RXER | ETH_INT_RXOF | ETH_INT_TX | ETH_INT_TXER | ETH_INT_RX)); /* Clear any interrupts that were already pending. */ ulTemp = EthernetIntStatus( ETH_BASE, pdFALSE ); EthernetIntClear( ETH_BASE, ulTemp ); /* Initialise the MAC and connect. */ EthernetInit( ETH_BASE ); EthernetConfigSet( ETH_BASE, ( ETH_CFG_TX_DPLXEN | ETH_CFG_TX_CRCEN | ETH_CFG_TX_PADEN ) ); EthernetEnable( ETH_BASE ); /* Mark each Rx buffer as empty. */ for( ulTemp = 0; ulTemp < emacNUM_RX_BUFFERS; ulTemp++ ) { ulRxLength[ ulTemp ] = 0; } /* Create the queue and task used to defer the MAC processing to the task level. */ vSemaphoreCreateBinary( xMACInterruptSemaphore ); xSemaphoreTake( xMACInterruptSemaphore, 0 ); xReturn = xTaskCreate( vMACHandleTask, ( signed portCHAR * ) "MAC", configMINIMAL_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL ); vTaskDelay( macNEGOTIATE_DELAY ); /* We are only interested in Rx interrupts. */ IntPrioritySet( INT_ETH, configKERNEL_INTERRUPT_PRIORITY ); IntEnable( INT_ETH ); EthernetIntEnable(ETH_BASE, ETH_INT_RX); return xReturn; } /*-----------------------------------------------------------*/ unsigned int uiGetEMACRxData( unsigned char *ucBuffer ) { static unsigned long ulNextRxBuffer = 0; unsigned int iLen; iLen = ulRxLength[ ulNextRxBuffer ]; if( iLen != 0 ) { /* Leave room for the size at the start of the buffer. */ uip_buf = &( ucRxBuffers[ ulNextRxBuffer ][ 2 ] ); ulRxLength[ ulNextRxBuffer ] = 0; ulNextRxBuffer++; if( ulNextRxBuffer >= emacNUM_RX_BUFFERS ) { ulNextRxBuffer = 0; } } return iLen; } /*-----------------------------------------------------------*/ void vInitialiseSend( void ) { /* Set the index to the first byte to send - skipping over the size bytes. */ ulNextTxSpace = 2; } /*-----------------------------------------------------------*/ void vIncrementTxLength( unsigned portLONG ulLength ) { ulNextTxSpace += ulLength; } /*-----------------------------------------------------------*/ void vSendBufferToMAC( void ) { unsigned long *pulSource; unsigned portSHORT * pus; unsigned portLONG ulNextWord; /* Locate the data to be send. */ pus = ( unsigned portSHORT * ) uip_buf; /* Add in the size of the data. */ pus--; *pus = ulNextTxSpace; /* Wait for data to be sent if there is no space immediately. */ while( !EthernetSpaceAvail( ETH_BASE ) ) { vTaskDelay( macWAIT_SEND_TIME ); } pulSource = ( unsigned portLONG * ) pus; for( ulNextWord = 0; ulNextWord < ulNextTxSpace; ulNextWord += sizeof( unsigned portLONG ) ) { HWREG(ETH_BASE + MAC_O_DATA) = *pulSource; pulSource++; } /* Go. */ HWREG( ETH_BASE + MAC_O_TR ) = MAC_TR_NEWTX; } /*-----------------------------------------------------------*/ void vEMAC_ISR( void ) { portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE; unsigned portLONG ulTemp; /* Clear the interrupt. */ ulTemp = EthernetIntStatus( ETH_BASE, pdFALSE ); EthernetIntClear( ETH_BASE, ulTemp ); /* Was it an Rx interrupt? */ if( ulTemp & ETH_INT_RX ) { xSemaphoreGiveFromISR( xMACInterruptSemaphore, &xHigherPriorityTaskWoken ); EthernetIntDisable( ETH_BASE, ETH_INT_RX ); } /* Switch to the uIP task. */ portEND_SWITCHING_ISR( xHigherPriorityTaskWoken ); } /*-----------------------------------------------------------*/ void vMACHandleTask( void *pvParameters ) { unsigned long ulLen = 0, i; unsigned portLONG ulLength, ulInt; unsigned long *pulBuffer; static unsigned portLONG ulNextRxBuffer = 0; portBASE_TYPE xSwitchRequired = pdFALSE; for( ;; ) { /* Wait for something to do. */ xSemaphoreTake( xMACInterruptSemaphore, portMAX_DELAY ); while( ( ulInt = ( EthernetIntStatus( ETH_BASE, pdFALSE ) & ETH_INT_RX ) ) != 0 ) { ulLength = HWREG( ETH_BASE + MAC_O_DATA ); /* Leave room at the start of the buffer for the size. */ pulBuffer = ( unsigned long * ) &( ucRxBuffers[ ulNextRxBuffer ][ 2 ] ); *pulBuffer = ( ulLength >> 16 ); /* Get the size of the data. */ pulBuffer = ( unsigned long * ) &( ucRxBuffers[ ulNextRxBuffer ][ 4 ] ); ulLength &= 0xFFFF; if( ulLength > 4 ) { ulLength -= 4; if( ulLength >= UIP_BUFSIZE ) { /* The data won't fit in our buffer. Ensure we don't try to write into the buffer. */ ulLength = 0; } /* Read out the data into our buffer. */ for( i = 0; i < ulLength; i += sizeof( unsigned portLONG ) ) { *pulBuffer = HWREG( ETH_BASE + MAC_O_DATA ); pulBuffer++; } /* Store the length of the data into the separate array. */ ulRxLength[ ulNextRxBuffer ] = ulLength; /* Use the next buffer the next time through. */ ulNextRxBuffer++; if( ulNextRxBuffer >= emacNUM_RX_BUFFERS ) { ulNextRxBuffer = 0; } /* Ensure the uIP task is not blocked as data has arrived. */ xSemaphoreGive( xEMACSemaphore ); } } EthernetIntEnable( ETH_BASE, ETH_INT_RX ); } }
Go to most recent revision | Compare with Previous | Blame | View Log