URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_LPC1768_GCC_Rowley/] [LPCUSB/] [usbcontrol.c] - Rev 592
Go to most recent revision | Compare with Previous | Blame | View Log
/* LPCUSB, an USB device driver for LPC microcontrollers Copyright (C) 2006 Bertrik Sikken (bertrik@sikken.nl) Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** @file Control transfer handler. This module handles control transfers and is normally installed on the endpoint 0 callback. Control transfers can be of the following type: 0 Standard; 1 Class; 2 Vendor; 3 Reserved. A callback can be installed for each of these control transfers using USBRegisterRequestHandler. When an OUT request arrives, data is collected in the data store provided with the USBRegisterRequestHandler call. When the transfer is done, the callback is called. When an IN request arrives, the callback is called immediately to either put the control transfer data in the data store, or to get a pointer to control transfer data. The data is then packetised and sent to the host. */ #include "usbdebug.h" #include "usbstruct.h" #include "usbapi.h" #define MAX_CONTROL_SIZE 128 /**< maximum total size of control transfer data */ #define MAX_REQ_HANDLERS 4 /**< standard, class, vendor, reserved */ static TSetupPacket Setup; /**< setup packet */ static unsigned char *pbData; /**< pointer to data buffer */ static int iResidue; /**< remaining bytes in buffer */ static int iLen; /**< total length of control transfer */ /** Array of installed request handler callbacks */ static TFnHandleRequest *apfnReqHandlers[4] = {NULL, NULL, NULL, NULL}; /** Array of installed request data pointers */ static unsigned char *apbDataStore[4] = {NULL, NULL, NULL, NULL}; /** Local function to handle a request by calling one of the installed request handlers. In case of data going from host to device, the data is at *ppbData. In case of data going from device to host, the handler can either choose to write its data at *ppbData or update the data pointer. @param [in] pSetup The setup packet @param [in,out] *piLen Pointer to data length @param [in,out] ppbData Data buffer. @return TRUE if the request was handles successfully */ static BOOL _HandleRequest(TSetupPacket *pSetup, int *piLen, unsigned char **ppbData) { TFnHandleRequest *pfnHandler; int iType; iType = REQTYPE_GET_TYPE(pSetup->bmRequestType); pfnHandler = apfnReqHandlers[iType]; if (pfnHandler == NULL) { DBG("No handler for reqtype %d\n", iType); return FALSE; } return pfnHandler(pSetup, piLen, ppbData); } /** Local function to stall the control endpoint @param [in] bEPStat Endpoint status */ static void StallControlPipe(unsigned char bEPStat) { unsigned char *pb; int i; ( void ) bEPStat; USBHwEPStall(0x80, TRUE); // dump setup packet DBG("STALL on ["); pb = (unsigned char *)&Setup; for (i = 0; i < 8; i++) { DBG(" %02x", *pb++); } DBG("] stat=%x\n", bEPStat); } /** Sends next chunk of data (possibly 0 bytes) to host */ static void DataIn(void) { int iChunk; if( MAX_PACKET_SIZE0 < iResidue ) { iChunk = MAX_PACKET_SIZE0; } else { iChunk = iResidue; } USBHwEPWrite(0x80, pbData, iChunk); pbData += iChunk; iResidue -= iChunk; } /** * Handles IN/OUT transfers on EP0 * * @param [in] bEP Endpoint address * @param [in] bEPStat Endpoint status */ void USBHandleControlTransfer(unsigned char bEP, unsigned char bEPStat) { int iChunk, iType; if (bEP == 0x00) { // OUT transfer if (bEPStat & EP_STATUS_SETUP) { // setup packet, reset request message state machine USBHwEPRead(0x00, (unsigned char *)&Setup, sizeof(Setup)); DBG("S%x", Setup.bRequest); // defaults for data pointer and residue iType = REQTYPE_GET_TYPE(Setup.bmRequestType); pbData = apbDataStore[iType]; iResidue = Setup.wLength; iLen = Setup.wLength; if ((Setup.wLength == 0) || (REQTYPE_GET_DIR(Setup.bmRequestType) == REQTYPE_DIR_TO_HOST)) { // ask installed handler to process request if (!_HandleRequest(&Setup, &iLen, &pbData)) { DBG("_HandleRequest1 failed\n"); StallControlPipe(bEPStat); return; } // send smallest of requested and offered length if( iLen < Setup.wLength ) { iResidue = iLen; } else { iResidue = Setup.wLength; } // send first part (possibly a zero-length status message) DataIn(); } } else { if (iResidue > 0) { // store data iChunk = USBHwEPRead(0x00, pbData, iResidue); if (iChunk < 0) { StallControlPipe(bEPStat); return; } pbData += iChunk; iResidue -= iChunk; if (iResidue == 0) { // received all, send data to handler iType = REQTYPE_GET_TYPE(Setup.bmRequestType); pbData = apbDataStore[iType]; if (!_HandleRequest(&Setup, &iLen, &pbData)) { DBG("_HandleRequest2 failed\n"); StallControlPipe(bEPStat); return; } // send status to host DataIn(); } } else { // absorb zero-length status message iChunk = USBHwEPRead(0x00, NULL, 0); DBG(iChunk > 0 ? "?" : ""); } } } else if (bEP == 0x80) { // IN transfer // send more data if available (possibly a 0-length packet) DataIn(); } else { ASSERT(FALSE); } } /** Registers a callback for handling requests @param [in] iType Type of request, e.g. REQTYPE_TYPE_STANDARD @param [in] *pfnHandler Callback function pointer @param [in] *pbDataStore Data storage area for this type of request */ void USBRegisterRequestHandler(int iType, TFnHandleRequest *pfnHandler, unsigned char *pbDataStore) { ASSERT(iType >= 0); ASSERT(iType < 4); apfnReqHandlers[iType] = pfnHandler; apbDataStore[iType] = pbDataStore; }
Go to most recent revision | Compare with Previous | Blame | View Log