URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_STM32F103_GCC_Rowley/] [ST Library/] [src/] [stm32f10x_usart.c] - Rev 606
Go to most recent revision | Compare with Previous | Blame | View Log
/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** * File Name : stm32f10x_usart.c * Author : MCD Application Team * Version : V2.0.1 * Date : 06/13/2008 * Description : This file provides all the USART firmware functions. ******************************************************************************** * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. * AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE * CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING * INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. *******************************************************************************/ /* Includes ------------------------------------------------------------------*/ #include "stm32f10x_usart.h" #include "stm32f10x_rcc.h" /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* USART UE Mask */ #define CR1_UE_Set ((u16)0x2000) /* USART Enable Mask */ #define CR1_UE_Reset ((u16)0xDFFF) /* USART Disable Mask */ /* USART WakeUp Method */ #define CR1_WAKE_Mask ((u16)0xF7FF) /* USART WakeUp Method Mask */ /* USART RWU Mask */ #define CR1_RWU_Set ((u16)0x0002) /* USART mute mode Enable Mask */ #define CR1_RWU_Reset ((u16)0xFFFD) /* USART mute mode Enable Mask */ #define CR1_SBK_Set ((u16)0x0001) /* USART Break Character send Mask */ #define CR1_CLEAR_Mask ((u16)0xE9F3) /* USART CR1 Mask */ #define CR2_Address_Mask ((u16)0xFFF0) /* USART address Mask */ /* USART LIN Mask */ #define CR2_LINEN_Set ((u16)0x4000) /* USART LIN Enable Mask */ #define CR2_LINEN_Reset ((u16)0xBFFF) /* USART LIN Disable Mask */ /* USART LIN Break detection */ #define CR2_LBDL_Mask ((u16)0xFFDF) /* USART LIN Break detection Mask */ #define CR2_STOP_CLEAR_Mask ((u16)0xCFFF) /* USART CR2 STOP Bits Mask */ #define CR2_CLOCK_CLEAR_Mask ((u16)0xF0FF) /* USART CR2 Clock Mask */ /* USART SC Mask */ #define CR3_SCEN_Set ((u16)0x0020) /* USART SC Enable Mask */ #define CR3_SCEN_Reset ((u16)0xFFDF) /* USART SC Disable Mask */ /* USART SC NACK Mask */ #define CR3_NACK_Set ((u16)0x0010) /* USART SC NACK Enable Mask */ #define CR3_NACK_Reset ((u16)0xFFEF) /* USART SC NACK Disable Mask */ /* USART Half-Duplex Mask */ #define CR3_HDSEL_Set ((u16)0x0008) /* USART Half-Duplex Enable Mask */ #define CR3_HDSEL_Reset ((u16)0xFFF7) /* USART Half-Duplex Disable Mask */ /* USART IrDA Mask */ #define CR3_IRLP_Mask ((u16)0xFFFB) /* USART IrDA LowPower mode Mask */ #define CR3_CLEAR_Mask ((u16)0xFCFF) /* USART CR3 Mask */ /* USART IrDA Mask */ #define CR3_IREN_Set ((u16)0x0002) /* USART IrDA Enable Mask */ #define CR3_IREN_Reset ((u16)0xFFFD) /* USART IrDA Disable Mask */ #define GTPR_LSB_Mask ((u16)0x00FF) /* Guard Time Register LSB Mask */ #define GTPR_MSB_Mask ((u16)0xFF00) /* Guard Time Register MSB Mask */ #define IT_Mask ((u16)0x001F) /* USART Interrupt Mask */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ /******************************************************************************* * Function Name : USART_DeInit * Description : Deinitializes the USARTx peripheral registers to their * default reset values. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * Output : None * Return : None *******************************************************************************/ void USART_DeInit(USART_TypeDef* USARTx) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); switch (*(u32*)&USARTx) { case USART1_BASE: RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); break; case USART2_BASE: RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); break; case USART3_BASE: RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); break; case UART4_BASE: RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); break; case UART5_BASE: RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); break; default: break; } } /******************************************************************************* * Function Name : USART_Init * Description : Initializes the USARTx peripheral according to the specified * parameters in the USART_InitStruct . * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_InitStruct: pointer to a USART_InitTypeDef structure * that contains the configuration information for the * specified USART peripheral. * Output : None * Return : None *******************************************************************************/ void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) { u32 tmpreg = 0x00, apbclock = 0x00; u32 integerdivider = 0x00; u32 fractionaldivider = 0x00; u32 usartxbase = 0; RCC_ClocksTypeDef RCC_ClocksStatus; /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); /* The hardware flow control is available only for USART1, USART2 and USART3 */ assert_param(IS_USART_PERIPH_HFC(USARTx, USART_InitStruct->USART_HardwareFlowControl)); usartxbase = (*(u32*)&USARTx); /*---------------------------- USART CR2 Configuration -----------------------*/ tmpreg = USARTx->CR2; /* Clear STOP[13:12] bits */ tmpreg &= CR2_STOP_CLEAR_Mask; /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ /* Set STOP[13:12] bits according to USART_StopBits value */ tmpreg |= (u32)USART_InitStruct->USART_StopBits; /* Write to USART CR2 */ USARTx->CR2 = (u16)tmpreg; /*---------------------------- USART CR1 Configuration -----------------------*/ tmpreg = USARTx->CR1; /* Clear M, PCE, PS, TE and RE bits */ tmpreg &= CR1_CLEAR_Mask; /* Configure the USART Word Length, Parity and mode ----------------------- */ /* Set the M bits according to USART_WordLength value */ /* Set PCE and PS bits according to USART_Parity value */ /* Set TE and RE bits according to USART_Mode value */ tmpreg |= (u32)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | USART_InitStruct->USART_Mode; /* Write to USART CR1 */ USARTx->CR1 = (u16)tmpreg; /*---------------------------- USART CR3 Configuration -----------------------*/ tmpreg = USARTx->CR3; /* Clear CTSE and RTSE bits */ tmpreg &= CR3_CLEAR_Mask; /* Configure the USART HFC -------------------------------------------------*/ /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ tmpreg |= USART_InitStruct->USART_HardwareFlowControl; /* Write to USART CR3 */ USARTx->CR3 = (u16)tmpreg; /*---------------------------- USART BRR Configuration -----------------------*/ /* Configure the USART Baud Rate -------------------------------------------*/ RCC_GetClocksFreq(&RCC_ClocksStatus); if (usartxbase == USART1_BASE) { apbclock = RCC_ClocksStatus.PCLK2_Frequency; } else { apbclock = RCC_ClocksStatus.PCLK1_Frequency; } /* Determine the integer part */ integerdivider = ((0x19 * apbclock) / (0x04 * (USART_InitStruct->USART_BaudRate))); tmpreg = (integerdivider / 0x64) << 0x04; /* Determine the fractional part */ fractionaldivider = integerdivider - (0x64 * (tmpreg >> 0x04)); tmpreg |= ((((fractionaldivider * 0x10) + 0x32) / 0x64)) & ((u8)0x0F); /* Write to USART BRR */ USARTx->BRR = (u16)tmpreg; } /******************************************************************************* * Function Name : USART_StructInit * Description : Fills each USART_InitStruct member with its default value. * Input : - USART_InitStruct: pointer to a USART_InitTypeDef structure * which will be initialized. * Output : None * Return : None *******************************************************************************/ void USART_StructInit(USART_InitTypeDef* USART_InitStruct) { /* USART_InitStruct members default value */ USART_InitStruct->USART_BaudRate = 9600; USART_InitStruct->USART_WordLength = USART_WordLength_8b; USART_InitStruct->USART_StopBits = USART_StopBits_1; USART_InitStruct->USART_Parity = USART_Parity_No ; USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; } /******************************************************************************* * Function Name : USART_ClockInit * Description : Initializes the USARTx peripheral Clock according to the * specified parameters in the USART_ClockInitStruct . * Input : - USARTx: where x can be 1, 2, 3 to select the USART peripheral. * Note: The Smart Card mode is not available for UART4 and UART5. * - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef * structure that contains the configuration information for * the specified USART peripheral. * Output : None * Return : None *******************************************************************************/ void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) { u32 tmpreg = 0x00; /* Check the parameters */ assert_param(IS_USART_123_PERIPH(USARTx)); assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); /*---------------------------- USART CR2 Configuration -----------------------*/ tmpreg = USARTx->CR2; /* Clear CLKEN, CPOL, CPHA and LBCL bits */ tmpreg &= CR2_CLOCK_CLEAR_Mask; /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ /* Set CLKEN bit according to USART_Clock value */ /* Set CPOL bit according to USART_CPOL value */ /* Set CPHA bit according to USART_CPHA value */ /* Set LBCL bit according to USART_LastBit value */ tmpreg |= (u32)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; /* Write to USART CR2 */ USARTx->CR2 = (u16)tmpreg; } /******************************************************************************* * Function Name : USART_ClockStructInit * Description : Fills each USART_ClockInitStruct member with its default value. * Input : - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef * structure which will be initialized. * Output : None * Return : None *******************************************************************************/ void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) { /* USART_ClockInitStruct members default value */ USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; } /******************************************************************************* * Function Name : USART_Cmd * Description : Enables or disables the specified USART peripheral. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * : - NewState: new state of the USARTx peripheral. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected USART by setting the UE bit in the CR1 register */ USARTx->CR1 |= CR1_UE_Set; } else { /* Disable the selected USART by clearing the UE bit in the CR1 register */ USARTx->CR1 &= CR1_UE_Reset; } } /******************************************************************************* * Function Name : USART_ITConfig * Description : Enables or disables the specified USART interrupts. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_IT: specifies the USART interrupt sources to be * enabled or disabled. * This parameter can be one of the following values: * - USART_IT_CTS: CTS change interrupt (not available for * UART4 and UART5) * - USART_IT_LBD: LIN Break detection interrupt * - USART_IT_TXE: Tansmit Data Register empty interrupt * - USART_IT_TC: Transmission complete interrupt * - USART_IT_RXNE: Receive Data register not empty * interrupt * - USART_IT_IDLE: Idle line detection interrupt * - USART_IT_PE: Parity Error interrupt * - USART_IT_ERR: Error interrupt(Frame error, noise * error, overrun error) * - NewState: new state of the specified USARTx interrupts. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void USART_ITConfig(USART_TypeDef* USARTx, u16 USART_IT, FunctionalState NewState) { u32 usartreg = 0x00, itpos = 0x00, itmask = 0x00; u32 usartxbase = 0x00; /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_CONFIG_IT(USART_IT)); assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */ assert_param(IS_FUNCTIONAL_STATE(NewState)); usartxbase = (*(u32*)&(USARTx)); /* Get the USART register index */ usartreg = (((u8)USART_IT) >> 0x05); /* Get the interrupt position */ itpos = USART_IT & IT_Mask; itmask = (((u32)0x01) << itpos); if (usartreg == 0x01) /* The IT is in CR1 register */ { usartxbase += 0x0C; } else if (usartreg == 0x02) /* The IT is in CR2 register */ { usartxbase += 0x10; } else /* The IT is in CR3 register */ { usartxbase += 0x14; } if (NewState != DISABLE) { *(vu32*)usartxbase |= itmask; } else { *(vu32*)usartxbase &= ~itmask; } } /******************************************************************************* * Function Name : USART_DMACmd * Description : Enables or disables the USART’s DMA interface. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3 or UART4. * Note: The DMA mode is not available for UART5. * - USART_DMAReq: specifies the DMA request. * This parameter can be any combination of the following values: * - USART_DMAReq_Tx: USART DMA transmit request * - USART_DMAReq_Rx: USART DMA receive request * - NewState: new state of the DMA Request sources. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void USART_DMACmd(USART_TypeDef* USARTx, u16 USART_DMAReq, FunctionalState NewState) { /* Check the parameters */ assert_param(IS_USART_1234_PERIPH(USARTx)); assert_param(IS_USART_DMAREQ(USART_DMAReq)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the DMA transfer for selected requests by setting the DMAT and/or DMAR bits in the USART CR3 register */ USARTx->CR3 |= USART_DMAReq; } else { /* Disable the DMA transfer for selected requests by clearing the DMAT and/or DMAR bits in the USART CR3 register */ USARTx->CR3 &= (u16)~USART_DMAReq; } } /******************************************************************************* * Function Name : USART_SetAddress * Description : Sets the address of the USART node. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_Address: Indicates the address of the USART node. * Output : None * Return : None *******************************************************************************/ void USART_SetAddress(USART_TypeDef* USARTx, u8 USART_Address) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_ADDRESS(USART_Address)); /* Clear the USART address */ USARTx->CR2 &= CR2_Address_Mask; /* Set the USART address node */ USARTx->CR2 |= USART_Address; } /******************************************************************************* * Function Name : USART_WakeUpConfig * Description : Selects the USART WakeUp method. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_WakeUp: specifies the USART wakeup method. * This parameter can be one of the following values: * - USART_WakeUp_IdleLine: WakeUp by an idle line detection * - USART_WakeUp_AddressMark: WakeUp by an address mark * Output : None * Return : None *******************************************************************************/ void USART_WakeUpConfig(USART_TypeDef* USARTx, u16 USART_WakeUp) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_WAKEUP(USART_WakeUp)); USARTx->CR1 &= CR1_WAKE_Mask; USARTx->CR1 |= USART_WakeUp; } /******************************************************************************* * Function Name : USART_ReceiverWakeUpCmd * Description : Determines if the USART is in mute mode or not. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - NewState: new state of the USART mute mode. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ USARTx->CR1 |= CR1_RWU_Set; } else { /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ USARTx->CR1 &= CR1_RWU_Reset; } } /******************************************************************************* * Function Name : USART_LINBreakDetectLengthConfig * Description : Sets the USART LIN Break detection length. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_LINBreakDetectLength: specifies the LIN break * detection length. * This parameter can be one of the following values: * - USART_LINBreakDetectLength_10b: 10-bit break detection * - USART_LINBreakDetectLength_11b: 11-bit break detection * Output : None * Return : None *******************************************************************************/ void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, u16 USART_LINBreakDetectLength) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); USARTx->CR2 &= CR2_LBDL_Mask; USARTx->CR2 |= USART_LINBreakDetectLength; } /******************************************************************************* * Function Name : USART_LINCmd * Description : Enables or disables the USART’s LIN mode. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - NewState: new state of the USART LIN mode. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ USARTx->CR2 |= CR2_LINEN_Set; } else { /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ USARTx->CR2 &= CR2_LINEN_Reset; } } /******************************************************************************* * Function Name : USART_SendData * Description : Transmits single data through the USARTx peripheral. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - Data: the data to transmit. * Output : None * Return : None *******************************************************************************/ void USART_SendData(USART_TypeDef* USARTx, u16 Data) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_DATA(Data)); /* Transmit Data */ USARTx->DR = (Data & (u16)0x01FF); } /******************************************************************************* * Function Name : USART_ReceiveData * Description : Returns the most recent received data by the USARTx peripheral. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * Output : None * Return : The received data. *******************************************************************************/ u16 USART_ReceiveData(USART_TypeDef* USARTx) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); /* Receive Data */ return (u16)(USARTx->DR & (u16)0x01FF); } /******************************************************************************* * Function Name : USART_SendBreak * Description : Transmits break characters. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * Output : None * Return : None *******************************************************************************/ void USART_SendBreak(USART_TypeDef* USARTx) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); /* Send break characters */ USARTx->CR1 |= CR1_SBK_Set; } /******************************************************************************* * Function Name : USART_SetGuardTime * Description : Sets the specified USART guard time. * Input : - USARTx: where x can be 1, 2 or 3 to select the USART * peripheral. * Note: The guard time bits are not available for UART4 and UART5. * - USART_GuardTime: specifies the guard time. * Output : None * Return : None *******************************************************************************/ void USART_SetGuardTime(USART_TypeDef* USARTx, u8 USART_GuardTime) { /* Check the parameters */ assert_param(IS_USART_123_PERIPH(USARTx)); /* Clear the USART Guard time */ USARTx->GTPR &= GTPR_LSB_Mask; /* Set the USART guard time */ USARTx->GTPR |= (u16)((u16)USART_GuardTime << 0x08); } /******************************************************************************* * Function Name : USART_SetPrescaler * Description : Sets the system clock prescaler. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * Note: The function is used for IrDA mode with UART4 and UART5. * - USART_Prescaler: specifies the prescaler clock. * Output : None * Return : None *******************************************************************************/ void USART_SetPrescaler(USART_TypeDef* USARTx, u8 USART_Prescaler) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); /* Clear the USART prescaler */ USARTx->GTPR &= GTPR_MSB_Mask; /* Set the USART prescaler */ USARTx->GTPR |= USART_Prescaler; } /******************************************************************************* * Function Name : USART_SmartCardCmd * Description : Enables or disables the USART’s Smart Card mode. * Input : - USARTx: where x can be 1, 2 or 3 to select the USART * peripheral. * Note: The Smart Card mode is not available for UART4 and UART5. * - NewState: new state of the Smart Card mode. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) { /* Check the parameters */ assert_param(IS_USART_123_PERIPH(USARTx)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the SC mode by setting the SCEN bit in the CR3 register */ USARTx->CR3 |= CR3_SCEN_Set; } else { /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ USARTx->CR3 &= CR3_SCEN_Reset; } } /******************************************************************************* * Function Name : USART_SmartCardNACKCmd * Description : Enables or disables NACK transmission. * Input : - USARTx: where x can be 1, 2 or 3 to select the USART * peripheral. * Note: The Smart Card mode is not available for UART4 and UART5. * - NewState: new state of the NACK transmission. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) { /* Check the parameters */ assert_param(IS_USART_123_PERIPH(USARTx)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ USARTx->CR3 |= CR3_NACK_Set; } else { /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ USARTx->CR3 &= CR3_NACK_Reset; } } /******************************************************************************* * Function Name : USART_HalfDuplexCmd * Description : Enables or disables the USART’s Half Duplex communication. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - NewState: new state of the USART Communication. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ USARTx->CR3 |= CR3_HDSEL_Set; } else { /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ USARTx->CR3 &= CR3_HDSEL_Reset; } } /******************************************************************************* * Function Name : USART_IrDAConfig * Description : Configures the USART’s IrDA interface. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_IrDAMode: specifies the IrDA mode. * This parameter can be one of the following values: * - USART_IrDAMode_LowPower * - USART_IrDAMode_Normal * Output : None * Return : None *******************************************************************************/ void USART_IrDAConfig(USART_TypeDef* USARTx, u16 USART_IrDAMode) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); USARTx->CR3 &= CR3_IRLP_Mask; USARTx->CR3 |= USART_IrDAMode; } /******************************************************************************* * Function Name : USART_IrDACmd * Description : Enables or disables the USART’s IrDA interface. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - NewState: new state of the IrDA mode. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ USARTx->CR3 |= CR3_IREN_Set; } else { /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ USARTx->CR3 &= CR3_IREN_Reset; } } /******************************************************************************* * Function Name : USART_GetFlagStatus * Description : Checks whether the specified USART flag is set or not. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_FLAG: specifies the flag to check. * This parameter can be one of the following values: * - USART_FLAG_CTS: CTS Change flag (not available for * UART4 and UART5) * - USART_FLAG_LBD: LIN Break detection flag * - USART_FLAG_TXE: Transmit data register empty flag * - USART_FLAG_TC: Transmission Complete flag * - USART_FLAG_RXNE: Receive data register not empty flag * - USART_FLAG_IDLE: Idle Line detection flag * - USART_FLAG_ORE: OverRun Error flag * - USART_FLAG_NE: Noise Error flag * - USART_FLAG_FE: Framing Error flag * - USART_FLAG_PE: Parity Error flag * Output : None * Return : The new state of USART_FLAG (SET or RESET). *******************************************************************************/ FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, u16 USART_FLAG) { FlagStatus bitstatus = RESET; /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_FLAG(USART_FLAG)); assert_param(IS_USART_PERIPH_FLAG(USARTx, USART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */ if ((USARTx->SR & USART_FLAG) != (u16)RESET) { bitstatus = SET; } else { bitstatus = RESET; } return bitstatus; } /******************************************************************************* * Function Name : USART_ClearFlag * Description : Clears the USARTx's pending flags. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_FLAG: specifies the flag to clear. * This parameter can be any combination of the following values: * - USART_FLAG_CTS: CTS Change flag (not available for * UART4 and UART5). * - USART_FLAG_LBD: LIN Break detection flag. * - USART_FLAG_TC: Transmission Complete flag. * - USART_FLAG_RXNE: Receive data register not empty flag. * - USART_FLAG_IDLE: Idle Line detection flag. * - USART_FLAG_ORE: OverRun Error flag. * - USART_FLAG_NE: Noise Error flag. * - USART_FLAG_FE: Framing Error flag. * - USART_FLAG_PE: Parity Error flag. * * Note: - For IDLE, ORE, NE, FE and PE flags user has to read * the USART DR register after calling this function. * - TXE flag can't be cleared by this function, it's * cleared only by a write to the USART DR register. * Output : None * Return : None *******************************************************************************/ void USART_ClearFlag(USART_TypeDef* USARTx, u16 USART_FLAG) { /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); assert_param(IS_USART_PERIPH_FLAG(USARTx, USART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */ USARTx->SR = (u16)~USART_FLAG; } /******************************************************************************* * Function Name : USART_GetITStatus * Description : Checks whether the specified USART interrupt has occurred or not. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_IT: specifies the USART interrupt source to check. * This parameter can be one of the following values: * - USART_IT_CTS: CTS change interrupt (not available for * UART4 and UART5) * - USART_IT_LBD: LIN Break detection interrupt * - USART_IT_TXE: Tansmit Data Register empty interrupt * - USART_IT_TC: Transmission complete interrupt * - USART_IT_RXNE: Receive Data register not empty * interrupt * - USART_IT_IDLE: Idle line detection interrupt * - USART_IT_ORE: OverRun Error interrupt * - USART_IT_NE: Noise Error interrupt * - USART_IT_FE: Framing Error interrupt * - USART_IT_PE: Parity Error interrupt * Output : None * Return : The new state of USART_IT (SET or RESET). *******************************************************************************/ ITStatus USART_GetITStatus(USART_TypeDef* USARTx, u16 USART_IT) { u32 bitpos = 0x00, itmask = 0x00, usartreg = 0x00; ITStatus bitstatus = RESET; /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_IT(USART_IT)); assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */ /* Get the USART register index */ usartreg = (((u8)USART_IT) >> 0x05); /* Get the interrupt position */ itmask = USART_IT & IT_Mask; itmask = (u32)0x01 << itmask; if (usartreg == 0x01) /* The IT is in CR1 register */ { itmask &= USARTx->CR1; } else if (usartreg == 0x02) /* The IT is in CR2 register */ { itmask &= USARTx->CR2; } else /* The IT is in CR3 register */ { itmask &= USARTx->CR3; } bitpos = USART_IT >> 0x08; bitpos = (u32)0x01 << bitpos; bitpos &= USARTx->SR; if ((itmask != (u16)RESET)&&(bitpos != (u16)RESET)) { bitstatus = SET; } else { bitstatus = RESET; } return bitstatus; } /******************************************************************************* * Function Name : USART_ClearITPendingBit * Description : Clears the USARTx’s interrupt pending bits. * Input : - USARTx: Select the USART or the UART peripheral. * This parameter can be one of the following values: * - USART1, USART2, USART3, UART4 or UART5. * - USART_IT: specifies the interrupt pending bit to clear. * This parameter can be one of the following values: * - USART_IT_CTS: CTS change interrupt (not available for * UART4 and UART5) * - USART_IT_LBD: LIN Break detection interrupt * - USART_IT_TC: Transmission complete interrupt. * - USART_IT_RXNE: Receive Data register not empty interrupt. * - USART_IT_IDLE: Idle line detection interrupt. * - USART_IT_ORE: OverRun Error interrupt. * - USART_IT_NE: Noise Error interrupt. * - USART_IT_FE: Framing Error interrupt. * - USART_IT_PE: Parity Error interrupt. * * Note: - For IDLE, ORE, NE, FE and PE pending bits user has to * read the USART DR register after calling this function. * - TXE pending bit can't be cleared by this function, it's * cleared only by a write to the USART DR register. * Output : None * Return : None *******************************************************************************/ void USART_ClearITPendingBit(USART_TypeDef* USARTx, u16 USART_IT) { u16 bitpos = 0x00, itmask = 0x00; /* Check the parameters */ assert_param(IS_USART_ALL_PERIPH(USARTx)); assert_param(IS_USART_CLEAR_IT(USART_IT)); assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */ bitpos = USART_IT >> 0x08; itmask = (u16)((u16)0x01 << bitpos); USARTx->SR = (u16)~itmask; } /******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
Go to most recent revision | Compare with Previous | Blame | View Log