URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_STM32F103_IAR/] [timertest.c] - Rev 675
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /* High speed timer test as described in main.c. */ /* Scheduler includes. */ #include "FreeRTOS.h" /* Library includes. */ #include "stm32f10x_lib.h" #include "stm32f10x_tim.h" #include "stm32f10x_map.h" /* The set frequency of the interrupt. Deviations from this are measured as the jitter. */ #define timerINTERRUPT_FREQUENCY ( ( unsigned portSHORT ) 20000 ) /* The expected time between each of the timer interrupts - if the jitter was zero. */ #define timerEXPECTED_DIFFERENCE_VALUE ( configCPU_CLOCK_HZ / timerINTERRUPT_FREQUENCY ) /* The highest available interrupt priority. */ #define timerHIGHEST_PRIORITY ( 0 ) /* Misc defines. */ #define timerMAX_32BIT_VALUE ( 0xffffffffUL ) #define timerTIMER_1_COUNT_VALUE ( * ( ( unsigned long * ) ( TIMER1_BASE + 0x48 ) ) ) /* The number of interrupts to pass before we start looking at the jitter. */ #define timerSETTLE_TIME 5 /*-----------------------------------------------------------*/ /* * Configures the two timers used to perform the test. */ void vSetupTimerTest( void ); /* Interrupt handler in which the jitter is measured. */ void vTimer2IntHandler( void ); /* Stores the value of the maximum recorded jitter between interrupts. */ volatile unsigned portSHORT usMaxJitter = 0; /*-----------------------------------------------------------*/ void vSetupTimerTest( void ) { unsigned long ulFrequency; TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; NVIC_InitTypeDef NVIC_InitStructure; /* Enable timer clocks */ RCC_APB1PeriphClockCmd( RCC_APB1Periph_TIM2, ENABLE ); RCC_APB1PeriphClockCmd( RCC_APB1Periph_TIM3, ENABLE ); /* Initialise data. */ TIM_DeInit( TIM2 ); TIM_DeInit( TIM3 ); TIM_TimeBaseStructInit( &TIM_TimeBaseStructure ); /* Time base configuration for timer 2 - which generates the interrupts. */ ulFrequency = configCPU_CLOCK_HZ / timerINTERRUPT_FREQUENCY; TIM_TimeBaseStructure.TIM_Period = ( unsigned portSHORT ) ( ulFrequency & 0xffffUL ); TIM_TimeBaseStructure.TIM_Prescaler = 0x0; TIM_TimeBaseStructure.TIM_ClockDivision = 0x0; TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; TIM_TimeBaseInit( TIM2, &TIM_TimeBaseStructure ); TIM_ARRPreloadConfig( TIM2, ENABLE ); /* Configuration for timer 3 which is used as a high resolution time measurement. */ TIM_TimeBaseStructure.TIM_Period = ( unsigned portSHORT ) 0xffff; TIM_TimeBaseInit( TIM3, &TIM_TimeBaseStructure ); TIM_ARRPreloadConfig( TIM3, ENABLE ); /* Enable TIM2 IT. TIM3 does not generate an interrupt. */ NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQChannel; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = timerHIGHEST_PRIORITY; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init( &NVIC_InitStructure ); TIM_ITConfig( TIM2, TIM_IT_Update, ENABLE ); /* Finally, enable both timers. */ TIM_Cmd( TIM2, ENABLE ); TIM_Cmd( TIM3, ENABLE ); } /*-----------------------------------------------------------*/ void vTimer2IntHandler( void ) { static unsigned portSHORT usLastCount = 0, usSettleCount = 0, usMaxDifference = 0; unsigned portSHORT usThisCount, usDifference; /* Capture the free running timer 3 value as we enter the interrupt. */ usThisCount = TIM3->CNT; if( usSettleCount >= timerSETTLE_TIME ) { /* What is the difference between the timer value in this interrupt and the value from the last interrupt. */ usDifference = usThisCount - usLastCount; /* Store the difference in the timer values if it is larger than the currently stored largest value. The difference over and above the expected difference will give the 'jitter' in the processing of these interrupts. */ if( usDifference > usMaxDifference ) { usMaxDifference = usDifference; usMaxJitter = usMaxDifference - timerEXPECTED_DIFFERENCE_VALUE; } } else { /* Don't bother storing any values for the first couple of interrupts. */ usSettleCount++; } /* Remember what the timer value was this time through, so we can calculate the difference the next time through. */ usLastCount = usThisCount; TIM_ClearITPendingBit( TIM2, TIM_IT_Update ); }
Go to most recent revision | Compare with Previous | Blame | View Log