URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_STM32L152_IAR/] [system_and_ST_code/] [STM32L152_EVAL/] [stm32l152_eval_lcd.c] - Rev 606
Go to most recent revision | Compare with Previous | Blame | View Log
/** ****************************************************************************** * @file stm32l152_eval_lcd.c * @author MCD Application Team * @version V4.4.0RC1 * @date 07/02/2010 * @brief This file includes the LCD driver for AM-240320L8TNQW00H (LCD_ILI9320), * AM-240320LDTNQW00H (LCD_SPFD5408B) Liquid Crystal Display Module * of STM32L152-EVAL board. ****************************************************************************** * @copy * * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * * <h2><center>© COPYRIGHT 2010 STMicroelectronics</center></h2> */ /* Includes ------------------------------------------------------------------*/ #include "stm32l152_eval_lcd.h" #include "../Common/fonts.c" /** @addtogroup Utilities * @{ */ /** @addtogroup STM32_EVAL * @{ */ /** @addtogroup STM32L152_EVAL * @{ */ /** @defgroup STM32L152_EVAL_LCD * @brief This file includes the LCD driver for AM-240320L8TNQW00H (LCD_ILI9320), * AM-240320LDTNQW00H (LCD_SPFD5408B) Liquid Crystal Display Module * of STM32L152-EVAL board. * @{ */ /** @defgroup STM32L152_EVAL_LCD_Private_Types * @{ */ /** * @} */ /** @defgroup STM32L152_EVAL_LCD_Private_Defines * @{ */ #define LCD_ILI9320 0x9320 #define LCD_SPFD5408 0x5408 #define START_BYTE 0x70 #define SET_INDEX 0x00 #define READ_STATUS 0x01 #define LCD_WRITE_REG 0x02 #define LCD_READ_REG 0x03 #define MAX_POLY_CORNERS 200 #define POLY_Y(Z) ((int32_t)((Points + Z)->X)) #define POLY_X(Z) ((int32_t)((Points + Z)->Y)) /** * @} */ /** @defgroup STM32L152_EVAL_LCD_Private_Macros * @{ */ #define ABS(X) ((X) > 0 ? (X) : -(X)) /** * @} */ /** @defgroup STM32L152_EVAL_LCD_Private_Variables * @{ */ static sFONT *LCD_Currentfonts; /* Global variables to set the written text color */ static __IO uint16_t TextColor = 0x0000, BackColor = 0xFFFF; static __IO uint32_t LCDType = LCD_SPFD5408; /** * @} */ /** @defgroup STM32L152_EVAL_LCD_Private_Function_Prototypes * @{ */ #ifndef USE_Delay static void delay(__IO uint32_t nCount); #endif /* USE_Delay*/ static void PutPixel(int16_t x, int16_t y); static void LCD_PolyLineRelativeClosed(pPoint Points, uint16_t PointCount, uint16_t Closed); /** * @} */ /** @defgroup STM32L152_EVAL_LCD_Private_Functions * @{ */ /** * @brief DeInitializes the LCD. * @param None * @retval None */ void STM32L152_LCD_DeInit(void) { GPIO_InitTypeDef GPIO_InitStructure; /*!< LCD Display Off */ LCD_DisplayOff(); /*!< LCD_SPI disable */ SPI_Cmd(LCD_SPI, DISABLE); /*!< LCD_SPI DeInit */ SPI_DeInit(LCD_SPI); /*!< Disable SPI clock */ RCC_APB1PeriphClockCmd(LCD_SPI_CLK, DISABLE); /* Configure NCS in Output Push-Pull mode */ GPIO_InitStructure.GPIO_Pin = LCD_NCS_PIN; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; GPIO_Init(LCD_NCS_GPIO_PORT, &GPIO_InitStructure); /* Configure SPI pins: SCK, MISO and MOSI */ GPIO_InitStructure.GPIO_Pin = LCD_SPI_SCK_PIN; GPIO_Init(LCD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = LCD_SPI_MISO_PIN; GPIO_Init(LCD_SPI_MISO_GPIO_PORT, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = LCD_SPI_MOSI_PIN; GPIO_Init(LCD_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure); } /** * @brief Setups the LCD. * @param None * @retval None */ void LCD_Setup(void) { /* Configure the LCD Control pins --------------------------------------------*/ LCD_CtrlLinesConfig(); /* Configure the LCD_SPI interface ----------------------------------------------*/ LCD_SPIConfig(); if(LCDType == LCD_SPFD5408) { /* Start Initial Sequence --------------------------------------------------*/ LCD_WriteReg(LCD_REG_227, 0x3008); /* Set internal timing */ LCD_WriteReg(LCD_REG_231, 0x0012); /* Set internal timing */ LCD_WriteReg(LCD_REG_239, 0x1231); /* Set internal timing */ LCD_WriteReg(LCD_REG_1, 0x0100); /* Set SS and SM bit */ LCD_WriteReg(LCD_REG_2, 0x0700); /* Set 1 line inversion */ LCD_WriteReg(LCD_REG_3, 0x1030); /* Set GRAM write direction and BGR=1. */ LCD_WriteReg(LCD_REG_4, 0x0000); /* Resize register */ LCD_WriteReg(LCD_REG_8, 0x0202); /* Set the back porch and front porch */ LCD_WriteReg(LCD_REG_9, 0x0000); /* Set non-display area refresh cycle ISC[3:0] */ LCD_WriteReg(LCD_REG_10, 0x0000); /* FMARK function */ LCD_WriteReg(LCD_REG_12, 0x0000); /* RGB interface setting */ LCD_WriteReg(LCD_REG_13, 0x0000); /* Frame marker Position */ LCD_WriteReg(LCD_REG_15, 0x0000); /* RGB interface polarity */ /* Power On sequence -------------------------------------------------------*/ LCD_WriteReg(LCD_REG_16, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */ LCD_WriteReg(LCD_REG_17, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */ LCD_WriteReg(LCD_REG_18, 0x0000); /* VREG1OUT voltage */ LCD_WriteReg(LCD_REG_19, 0x0000); /* VDV[4:0] for VCOM amplitude */ _delay_(20); /* Dis-charge capacitor power voltage (200ms) */ LCD_WriteReg(LCD_REG_17, 0x0007); /* DC1[2:0], DC0[2:0], VC[2:0] */ _delay_(5); /* Delay 50 ms */ LCD_WriteReg(LCD_REG_16, 0x12B0); /* SAP, BT[3:0], AP, DSTB, SLP, STB */ _delay_(5); /* Delay 50 ms */ LCD_WriteReg(LCD_REG_18, 0x01BD); /* External reference voltage= Vci */ _delay_(5); /* Delay 50 ms */ LCD_WriteReg(LCD_REG_19, 0x1400); /* VDV[4:0] for VCOM amplitude */ LCD_WriteReg(LCD_REG_41, 0x000E); /* VCM[4:0] for VCOMH */ _delay_(5); /* Delay 50 ms */ LCD_WriteReg(LCD_REG_32, 0x0000); /* GRAM horizontal Address */ LCD_WriteReg(LCD_REG_33, 0x013F); /* GRAM Vertical Address */ /* Adjust the Gamma Curve --------------------------------------------------*/ LCD_WriteReg(LCD_REG_48, 0x0007); LCD_WriteReg(LCD_REG_49, 0x0302); LCD_WriteReg(LCD_REG_50, 0x0105); LCD_WriteReg(LCD_REG_53, 0x0206); LCD_WriteReg(LCD_REG_54, 0x0808); LCD_WriteReg(LCD_REG_55, 0x0206); LCD_WriteReg(LCD_REG_56, 0x0504); LCD_WriteReg(LCD_REG_57, 0x0007); LCD_WriteReg(LCD_REG_60, 0x0105); LCD_WriteReg(LCD_REG_61, 0x0808); /* Set GRAM area -----------------------------------------------------------*/ LCD_WriteReg(LCD_REG_80, 0x0000); /* Horizontal GRAM Start Address */ LCD_WriteReg(LCD_REG_81, 0x00EF); /* Horizontal GRAM End Address */ LCD_WriteReg(LCD_REG_82, 0x0000); /* Vertical GRAM Start Address */ LCD_WriteReg(LCD_REG_83, 0x013F); /* Vertical GRAM End Address */ LCD_WriteReg(LCD_REG_96, 0xA700); /* Gate Scan Line */ LCD_WriteReg(LCD_REG_97, 0x0001); /* NDL,VLE, REV */ LCD_WriteReg(LCD_REG_106, 0x0000); /* Set scrolling line */ /* Partial Display Control -------------------------------------------------*/ LCD_WriteReg(LCD_REG_128, 0x0000); LCD_WriteReg(LCD_REG_129, 0x0000); LCD_WriteReg(LCD_REG_130, 0x0000); LCD_WriteReg(LCD_REG_131, 0x0000); LCD_WriteReg(LCD_REG_132, 0x0000); LCD_WriteReg(LCD_REG_133, 0x0000); /* Panel Control -----------------------------------------------------------*/ LCD_WriteReg(LCD_REG_144, 0x0010); LCD_WriteReg(LCD_REG_146, 0x0000); LCD_WriteReg(LCD_REG_147, 0x0003); LCD_WriteReg(LCD_REG_149, 0x0110); LCD_WriteReg(LCD_REG_151, 0x0000); LCD_WriteReg(LCD_REG_152, 0x0000); /* Set GRAM write direction and BGR = 1 I/D=01 (Horizontal : increment, Vertical : decrement) AM=1 (address is updated in vertical writing direction) */ LCD_WriteReg(LCD_REG_3, 0x1018); LCD_WriteReg(LCD_REG_7, 0x0112); /* 262K color and display ON */ } else if(LCDType == LCD_ILI9320) { _delay_(5); /* Delay 50 ms */ /* Start Initial Sequence ------------------------------------------------*/ LCD_WriteReg(LCD_REG_229, 0x8000); /* Set the internal vcore voltage */ LCD_WriteReg(LCD_REG_0, 0x0001); /* Start internal OSC. */ LCD_WriteReg(LCD_REG_1, 0x0100); /* set SS and SM bit */ LCD_WriteReg(LCD_REG_2, 0x0700); /* set 1 line inversion */ LCD_WriteReg(LCD_REG_3, 0x1030); /* set GRAM write direction and BGR=1. */ LCD_WriteReg(LCD_REG_4, 0x0000); /* Resize register */ LCD_WriteReg(LCD_REG_8, 0x0202); /* set the back porch and front porch */ LCD_WriteReg(LCD_REG_9, 0x0000); /* set non-display area refresh cycle ISC[3:0] */ LCD_WriteReg(LCD_REG_10, 0x0000); /* FMARK function */ LCD_WriteReg(LCD_REG_12, 0x0000); /* RGB interface setting */ LCD_WriteReg(LCD_REG_13, 0x0000); /* Frame marker Position */ LCD_WriteReg(LCD_REG_15, 0x0000); /* RGB interface polarity */ /* Power On sequence -----------------------------------------------------*/ LCD_WriteReg(LCD_REG_16, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */ LCD_WriteReg(LCD_REG_17, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */ LCD_WriteReg(LCD_REG_18, 0x0000); /* VREG1OUT voltage */ LCD_WriteReg(LCD_REG_19, 0x0000); /* VDV[4:0] for VCOM amplitude */ _delay_(20); /* Dis-charge capacitor power voltage (200ms) */ LCD_WriteReg(LCD_REG_16, 0x17B0); /* SAP, BT[3:0], AP, DSTB, SLP, STB */ LCD_WriteReg(LCD_REG_17, 0x0137); /* DC1[2:0], DC0[2:0], VC[2:0] */ _delay_(5); /* Delay 50 ms */ LCD_WriteReg(LCD_REG_18, 0x0139); /* VREG1OUT voltage */ _delay_(5); /* Delay 50 ms */ LCD_WriteReg(LCD_REG_19, 0x1d00); /* VDV[4:0] for VCOM amplitude */ LCD_WriteReg(LCD_REG_41, 0x0013); /* VCM[4:0] for VCOMH */ _delay_(5); /* Delay 50 ms */ LCD_WriteReg(LCD_REG_32, 0x0000); /* GRAM horizontal Address */ LCD_WriteReg(LCD_REG_33, 0x0000); /* GRAM Vertical Address */ /* Adjust the Gamma Curve ------------------------------------------------*/ LCD_WriteReg(LCD_REG_48, 0x0006); LCD_WriteReg(LCD_REG_49, 0x0101); LCD_WriteReg(LCD_REG_50, 0x0003); LCD_WriteReg(LCD_REG_53, 0x0106); LCD_WriteReg(LCD_REG_54, 0x0b02); LCD_WriteReg(LCD_REG_55, 0x0302); LCD_WriteReg(LCD_REG_56, 0x0707); LCD_WriteReg(LCD_REG_57, 0x0007); LCD_WriteReg(LCD_REG_60, 0x0600); LCD_WriteReg(LCD_REG_61, 0x020b); /* Set GRAM area ---------------------------------------------------------*/ LCD_WriteReg(LCD_REG_80, 0x0000); /* Horizontal GRAM Start Address */ LCD_WriteReg(LCD_REG_81, 0x00EF); /* Horizontal GRAM End Address */ LCD_WriteReg(LCD_REG_82, 0x0000); /* Vertical GRAM Start Address */ LCD_WriteReg(LCD_REG_83, 0x013F); /* Vertical GRAM End Address */ LCD_WriteReg(LCD_REG_96, 0x2700); /* Gate Scan Line */ LCD_WriteReg(LCD_REG_97, 0x0001); /* NDL,VLE, REV */ LCD_WriteReg(LCD_REG_106, 0x0000); /* set scrolling line */ /* Partial Display Control -----------------------------------------------*/ LCD_WriteReg(LCD_REG_128, 0x0000); LCD_WriteReg(LCD_REG_129, 0x0000); LCD_WriteReg(LCD_REG_130, 0x0000); LCD_WriteReg(LCD_REG_131, 0x0000); LCD_WriteReg(LCD_REG_132, 0x0000); LCD_WriteReg(LCD_REG_133, 0x0000); /* Panel Control ---------------------------------------------------------*/ LCD_WriteReg(LCD_REG_144, 0x0010); LCD_WriteReg(LCD_REG_146, 0x0000); LCD_WriteReg(LCD_REG_147, 0x0003); LCD_WriteReg(LCD_REG_149, 0x0110); LCD_WriteReg(LCD_REG_151, 0x0000); LCD_WriteReg(LCD_REG_152, 0x0000); /* Set GRAM write direction and BGR = 1 */ /* I/D=01 (Horizontal : increment, Vertical : decrement) */ /* AM=1 (address is updated in vertical writing direction) */ LCD_WriteReg(LCD_REG_3, 0x1018); LCD_WriteReg(LCD_REG_7, 0x0173); /* 262K color and display ON */ } } /** * @brief Initializes the LCD. * @param None * @retval None */ void STM32L152_LCD_Init(void) { /* Setups the LCD */ LCD_Setup(); /* Try to read new LCD controller ID 0x5408 */ if (LCD_ReadReg(LCD_REG_0) == LCD_SPFD5408) { LCDType = LCD_SPFD5408; } else { LCDType = LCD_ILI9320; /* Setups the LCD */ LCD_Setup(); } LCD_SetFont(&LCD_DEFAULT_FONT); } /** * @brief Sets the LCD Text and Background colors. * @param _TextColor: specifies the Text Color. * @param _BackColor: specifies the Background Color. * @retval None */ void LCD_SetColors(__IO uint16_t _TextColor, __IO uint16_t _BackColor) { TextColor = _TextColor; BackColor = _BackColor; } /** * @brief Gets the LCD Text and Background colors. * @param _TextColor: pointer to the variable that will contain the Text Color. * @param _BackColor: pointer to the variable that will contain the Background Color. * @retval None */ void LCD_GetColors(__IO uint16_t *_TextColor, __IO uint16_t *_BackColor) { *_TextColor = TextColor; *_BackColor = BackColor; } /** * @brief Sets the Text color. * @param Color: specifies the Text color code RGB(5-6-5). * @retval None */ void LCD_SetTextColor(__IO uint16_t Color) { TextColor = Color; } /** * @brief Sets the Background color. * @param Color: specifies the Background color code RGB(5-6-5). * @retval None */ void LCD_SetBackColor(__IO uint16_t Color) { BackColor = Color; } /** * @brief Sets the Text Font. * @param fonts: specifies the font to be used. * @retval None */ void LCD_SetFont(sFONT *fonts) { LCD_Currentfonts = fonts; } /** * @brief Gets the Text Font. * @param None. * @retval the used font. */ sFONT *LCD_GetFont(void) { return LCD_Currentfonts; } /** * @brief Clears the selected line. * @param Line: the Line to be cleared. * This parameter can be one of the following values: * @arg Linex: where x can be 0..n * @retval None */ void LCD_ClearLine(uint8_t Line) { uint16_t refcolumn = LCD_PIXEL_WIDTH - 1; /* Send the string character by character on lCD */ while (((refcolumn + 1) & 0xFFFF) >= LCD_Currentfonts->Width) { /* Display one character on LCD */ LCD_DisplayChar(Line, refcolumn, ' '); /* Decrement the column position by 16 */ refcolumn -= LCD_Currentfonts->Width; } } /** * @brief Clears the hole LCD. * @param Color: the color of the background. * @retval None */ void LCD_Clear(uint16_t Color) { uint32_t index = 0; LCD_SetCursor(0x00, 0x013F); LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */ for(index = 0; index < 76800; index++) { LCD_WriteRAM(Color); } LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); } /** * @brief Sets the cursor position. * @param Xpos: specifies the X position. * @param Ypos: specifies the Y position. * @retval None */ void LCD_SetCursor(uint8_t Xpos, uint16_t Ypos) { LCD_WriteReg(LCD_REG_32, Xpos); LCD_WriteReg(LCD_REG_33, Ypos); } /** * @brief Draws a character on LCD. * @param Xpos: the Line where to display the character shape. * @param Ypos: start column address. * @param c: pointer to the character data. * @retval None */ void LCD_DrawChar(uint8_t Xpos, uint16_t Ypos, const uint16_t *c) { uint32_t index = 0, i = 0; uint8_t Xaddress = 0; Xaddress = Xpos; LCD_SetCursor(Xaddress, Ypos); for(index = 0; index < LCD_Currentfonts->Height; index++) { LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */ for(i = 0; i < LCD_Currentfonts->Width; i++) { if((((c[index] & ((0x80 << ((LCD_Currentfonts->Width / 12 ) * 8 ) ) >> i)) == 0x00) &&(LCD_Currentfonts->Width <= 12))|| (((c[index] & (0x1 << i)) == 0x00)&&(LCD_Currentfonts->Width > 12 ))) { LCD_WriteRAM(BackColor); } else { LCD_WriteRAM(TextColor); } } LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); Xaddress++; LCD_SetCursor(Xaddress, Ypos); } } /** * @brief Displays one character (16dots width, 24dots height). * @param Line: the Line where to display the character shape . * This parameter can be one of the following values: * @arg Linex: where x can be 0..9 * @param Column: start column address. * @param Ascii: character ascii code, must be between 0x20 and 0x7E. * @retval None */ void LCD_DisplayChar(uint8_t Line, uint16_t Column, uint8_t Ascii) { Ascii -= 32; LCD_DrawChar(Line, Column, &LCD_Currentfonts->table[Ascii * LCD_Currentfonts->Height]); } /** * @brief Displays a maximum of 20 char on the LCD. * @param Line: the Line where to display the character shape . * This parameter can be one of the following values: * @arg Linex: where x can be 0..9 * @param *ptr: pointer to string to display on LCD. * @retval None */ void LCD_DisplayStringLine(uint8_t Line, uint8_t *ptr) { uint16_t refcolumn = LCD_PIXEL_WIDTH - 1; /* Send the string character by character on lCD */ while ((*ptr != 0) & (((refcolumn + 1) & 0xFFFF) >= LCD_Currentfonts->Width)) { /* Display one character on LCD */ LCD_DisplayChar(Line, refcolumn, *ptr); /* Decrement the column position by 16 */ refcolumn -= LCD_Currentfonts->Width; /* Point on the next character */ ptr++; } } /** * @brief Sets a display window * @param Xpos: specifies the X buttom left position. * @param Ypos: specifies the Y buttom left position. * @param Height: display window height. * @param Width: display window width. * @retval None */ void LCD_SetDisplayWindow(uint8_t Xpos, uint16_t Ypos, uint8_t Height, uint16_t Width) { /* Horizontal GRAM Start Address */ if(Xpos >= Height) { LCD_WriteReg(LCD_REG_80, (Xpos - Height + 1)); } else { LCD_WriteReg(LCD_REG_80, 0); } /* Horizontal GRAM End Address */ LCD_WriteReg(LCD_REG_81, Xpos); /* Vertical GRAM Start Address */ if(Ypos >= Width) { LCD_WriteReg(LCD_REG_82, (Ypos - Width + 1)); } else { LCD_WriteReg(LCD_REG_82, 0); } /* Vertical GRAM End Address */ LCD_WriteReg(LCD_REG_83, Ypos); LCD_SetCursor(Xpos, Ypos); } /** * @brief Disables LCD Window mode. * @param None * @retval None */ void LCD_WindowModeDisable(void) { LCD_SetDisplayWindow(239, 0x13F, 240, 320); LCD_WriteReg(LCD_REG_3, 0x1018); } /** * @brief Displays a line. * @param Xpos: specifies the X position. * @param Ypos: specifies the Y position. * @param Length: line length. * @param Direction: line direction. * This parameter can be one of the following values: Vertical or Horizontal. * @retval None */ void LCD_DrawLine(uint8_t Xpos, uint16_t Ypos, uint16_t Length, uint8_t Direction) { uint32_t i = 0; LCD_SetCursor(Xpos, Ypos); if(Direction == LCD_DIR_HORIZONTAL) { LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */ for(i = 0; i < Length; i++) { LCD_WriteRAM(TextColor); } LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); } else { for(i = 0; i < Length; i++) { LCD_WriteRAMWord(TextColor); Xpos++; LCD_SetCursor(Xpos, Ypos); } } } /** * @brief Displays a rectangle. * @param Xpos: specifies the X position. * @param Ypos: specifies the Y position. * @param Height: display rectangle height. * @param Width: display rectangle width. * @retval None */ void LCD_DrawRect(uint8_t Xpos, uint16_t Ypos, uint8_t Height, uint16_t Width) { LCD_DrawLine(Xpos, Ypos, Width, LCD_DIR_HORIZONTAL); LCD_DrawLine((Xpos + Height), Ypos, Width, LCD_DIR_HORIZONTAL); LCD_DrawLine(Xpos, Ypos, Height, LCD_DIR_VERTICAL); LCD_DrawLine(Xpos, (Ypos - Width + 1), Height, LCD_DIR_VERTICAL); } /** * @brief Displays a circle. * @param Xpos: specifies the X position. * @param Ypos: specifies the Y position. * @param Radius * @retval None */ void LCD_DrawCircle(uint8_t Xpos, uint16_t Ypos, uint16_t Radius) { int32_t D;/* Decision Variable */ uint32_t CurX;/* Current X Value */ uint32_t CurY;/* Current Y Value */ D = 3 - (Radius << 1); CurX = 0; CurY = Radius; while (CurX <= CurY) { LCD_SetCursor(Xpos + CurX, Ypos + CurY); LCD_WriteRAMWord(TextColor); LCD_SetCursor(Xpos + CurX, Ypos - CurY); LCD_WriteRAMWord(TextColor); LCD_SetCursor(Xpos - CurX, Ypos + CurY); LCD_WriteRAMWord(TextColor); LCD_SetCursor(Xpos - CurX, Ypos - CurY); LCD_WriteRAMWord(TextColor); LCD_SetCursor(Xpos + CurY, Ypos + CurX); LCD_WriteRAMWord(TextColor); LCD_SetCursor(Xpos + CurY, Ypos - CurX); LCD_WriteRAMWord(TextColor); LCD_SetCursor(Xpos - CurY, Ypos + CurX); LCD_WriteRAMWord(TextColor); LCD_SetCursor(Xpos - CurY, Ypos - CurX); LCD_WriteRAMWord(TextColor); if (D < 0) { D += (CurX << 2) + 6; } else { D += ((CurX - CurY) << 2) + 10; CurY--; } CurX++; } } /** * @brief Displays a monocolor picture. * @param Pict: pointer to the picture array. * @retval None */ void LCD_DrawMonoPict(const uint32_t *Pict) { uint32_t index = 0, i = 0; LCD_SetCursor(0, (LCD_PIXEL_WIDTH - 1)); LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */ for(index = 0; index < 2400; index++) { for(i = 0; i < 32; i++) { if((Pict[index] & (1 << i)) == 0x00) { LCD_WriteRAM(BackColor); } else { LCD_WriteRAM(TextColor); } } } LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); } #ifdef USE_LCD_DrawBMP /** * @brief Displays a bitmap picture loaded in the SPI Flash. * @param BmpAddress: Bmp picture address in the SPI Flash. * @retval None */ void LCD_DrawBMP(uint32_t BmpAddress) { uint32_t i = 0, size = 0; /* Read bitmap size */ SPI_FLASH_BufferRead((uint8_t*)&size, BmpAddress + 2, 4); /* get bitmap data address offset */ SPI_FLASH_BufferRead((uint8_t*)&i, BmpAddress + 10, 4); size = (size - i)/2; SPI_FLASH_StartReadSequence(BmpAddress + i); /* Disable SPI1 */ SPI_Cmd(SPI1, DISABLE); /* SPI in 16-bit mode */ SPI_DataSizeConfig(SPI1, SPI_DataSize_16b); /* Enable SPI1 */ SPI_Cmd(SPI1, ENABLE); if((LCDType == LCD_ILI9320) || (LCDType == LCD_SPFD5408)) { /* Set GRAM write direction and BGR = 1 */ /* I/D=00 (Horizontal : decrement, Vertical : decrement) */ /* AM=1 (address is updated in vertical writing direction) */ LCD_WriteReg(LCD_REG_3, 0x1008); LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */ } /* Read bitmap data from SPI Flash and send them to LCD */ for(i = 0; i < size; i++) { LCD_WriteRAM(__REV16(SPI_FLASH_SendHalfWord(0xA5A5))); } if((LCDType == LCD_ILI9320) || (LCDType == LCD_SPFD5408)) { LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); } /* Deselect the FLASH: Chip Select high */ SPI_FLASH_CS_HIGH(); /* Disable SPI1 */ SPI_Cmd(SPI1, DISABLE); /* SPI in 8-bit mode */ SPI_DataSizeConfig(SPI1, SPI_DataSize_8b); /* Enable SPI1 */ SPI_Cmd(SPI1, ENABLE); if((LCDType == LCD_ILI9320) || (LCDType == LCD_SPFD5408)) { /* Set GRAM write direction and BGR = 1 */ /* I/D = 01 (Horizontal : increment, Vertical : decrement) */ /* AM = 1 (address is updated in vertical writing direction) */ LCD_WriteReg(LCD_REG_3, 0x1018); } } #endif /* USE_LCD_DrawBMP */ /** * @brief Displays a full rectangle. * @param Xpos: specifies the X position. * @param Ypos: specifies the Y position. * @param Height: rectangle height. * @param Width: rectangle width. * @retval None */ void LCD_DrawFullRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height) { LCD_SetTextColor(TextColor); LCD_DrawLine(Xpos, Ypos, Width, LCD_DIR_HORIZONTAL); LCD_DrawLine((Xpos + Height), Ypos, Width, LCD_DIR_HORIZONTAL); LCD_DrawLine(Xpos, Ypos, Height, LCD_DIR_VERTICAL); LCD_DrawLine(Xpos, (Ypos - Width + 1), Height, LCD_DIR_VERTICAL); Width -= 2; Height--; Ypos--; LCD_SetTextColor(BackColor); while(Height--) { LCD_DrawLine(++Xpos, Ypos, Width, LCD_DIR_HORIZONTAL); } LCD_SetTextColor(TextColor); } /** * @brief Displays a full circle. * @param Xpos: specifies the X position. * @param Ypos: specifies the Y position. * @param Radius * @retval None */ void LCD_DrawFullCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius) { int32_t D; /* Decision Variable */ uint32_t CurX;/* Current X Value */ uint32_t CurY;/* Current Y Value */ D = 3 - (Radius << 1); CurX = 0; CurY = Radius; LCD_SetTextColor(BackColor); while (CurX <= CurY) { if(CurY > 0) { LCD_DrawLine(Xpos - CurX, Ypos + CurY, 2*CurY, LCD_DIR_HORIZONTAL); LCD_DrawLine(Xpos + CurX, Ypos + CurY, 2*CurY, LCD_DIR_HORIZONTAL); } if(CurX > 0) { LCD_DrawLine(Xpos - CurY, Ypos + CurX, 2*CurX, LCD_DIR_HORIZONTAL); LCD_DrawLine(Xpos + CurY, Ypos + CurX, 2*CurX, LCD_DIR_HORIZONTAL); } if (D < 0) { D += (CurX << 2) + 6; } else { D += ((CurX - CurY) << 2) + 10; CurY--; } CurX++; } LCD_SetTextColor(TextColor); LCD_DrawCircle(Xpos, Ypos, Radius); } /** * @brief Displays an uni line (between two points). * @param x1: specifies the point 1 x position. * @param y1: specifies the point 1 y position. * @param x2: specifies the point 2 x position. * @param y2: specifies the point 2 y position. * @retval None */ void LCD_DrawUniLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) { int16_t deltax = 0, deltay = 0, x = 0, y = 0, xinc1 = 0, xinc2 = 0, yinc1 = 0, yinc2 = 0, den = 0, num = 0, numadd = 0, numpixels = 0, curpixel = 0; deltax = ABS(x2 - x1); /* The difference between the x's */ deltay = ABS(y2 - y1); /* The difference between the y's */ x = x1; /* Start x off at the first pixel */ y = y1; /* Start y off at the first pixel */ if (x2 >= x1) /* The x-values are increasing */ { xinc1 = 1; xinc2 = 1; } else /* The x-values are decreasing */ { xinc1 = -1; xinc2 = -1; } if (y2 >= y1) /* The y-values are increasing */ { yinc1 = 1; yinc2 = 1; } else /* The y-values are decreasing */ { yinc1 = -1; yinc2 = -1; } if (deltax >= deltay) /* There is at least one x-value for every y-value */ { xinc1 = 0; /* Don't change the x when numerator >= denominator */ yinc2 = 0; /* Don't change the y for every iteration */ den = deltax; num = deltax / 2; numadd = deltay; numpixels = deltax; /* There are more x-values than y-values */ } else /* There is at least one y-value for every x-value */ { xinc2 = 0; /* Don't change the x for every iteration */ yinc1 = 0; /* Don't change the y when numerator >= denominator */ den = deltay; num = deltay / 2; numadd = deltax; numpixels = deltay; /* There are more y-values than x-values */ } for (curpixel = 0; curpixel <= numpixels; curpixel++) { PutPixel(x, y); /* Draw the current pixel */ num += numadd; /* Increase the numerator by the top of the fraction */ if (num >= den) /* Check if numerator >= denominator */ { num -= den; /* Calculate the new numerator value */ x += xinc1; /* Change the x as appropriate */ y += yinc1; /* Change the y as appropriate */ } x += xinc2; /* Change the x as appropriate */ y += yinc2; /* Change the y as appropriate */ } } /** * @brief Displays an polyline (between many points). * @param Points: pointer to the points array. * @param PointCount: Number of points. * @retval None */ void LCD_PolyLine(pPoint Points, uint16_t PointCount) { int16_t X = 0, Y = 0; if(PointCount < 2) { return; } while(--PointCount) { X = Points->X; Y = Points->Y; Points++; LCD_DrawUniLine(X, Y, Points->X, Points->Y); } } /** * @brief Displays an relative polyline (between many points). * @param Points: pointer to the points array. * @param PointCount: Number of points. * @param Closed: specifies if the draw is closed or not. * 1: closed, 0 : not closed. * @retval None */ static void LCD_PolyLineRelativeClosed(pPoint Points, uint16_t PointCount, uint16_t Closed) { int16_t X = 0, Y = 0; pPoint First = Points; if(PointCount < 2) { return; } X = Points->X; Y = Points->Y; while(--PointCount) { Points++; LCD_DrawUniLine(X, Y, X + Points->X, Y + Points->Y); X = X + Points->X; Y = Y + Points->Y; } if(Closed) { LCD_DrawUniLine(First->X, First->Y, X, Y); } } /** * @brief Displays a closed polyline (between many points). * @param Points: pointer to the points array. * @param PointCount: Number of points. * @retval None */ void LCD_ClosedPolyLine(pPoint Points, uint16_t PointCount) { LCD_PolyLine(Points, PointCount); LCD_DrawUniLine(Points->X, Points->Y, (Points+PointCount-1)->X, (Points+PointCount-1)->Y); } /** * @brief Displays a relative polyline (between many points). * @param Points: pointer to the points array. * @param PointCount: Number of points. * @retval None */ void LCD_PolyLineRelative(pPoint Points, uint16_t PointCount) { LCD_PolyLineRelativeClosed(Points, PointCount, 0); } /** * @brief Displays a closed relative polyline (between many points). * @param Points: pointer to the points array. * @param PointCount: Number of points. * @retval None */ void LCD_ClosedPolyLineRelative(pPoint Points, uint16_t PointCount) { LCD_PolyLineRelativeClosed(Points, PointCount, 1); } /** * @brief Displays a full polyline (between many points). * @param Points: pointer to the points array. * @param PointCount: Number of points. * @retval None */ void LCD_FillPolyLine(pPoint Points, uint16_t PointCount) { /* public-domain code by Darel Rex Finley, 2007 */ uint16_t nodes = 0, nodeX[MAX_POLY_CORNERS], pixelX = 0, pixelY = 0, i = 0, j = 0, swap = 0; uint16_t IMAGE_LEFT = 0, IMAGE_RIGHT = 0, IMAGE_TOP = 0, IMAGE_BOTTOM = 0; IMAGE_LEFT = IMAGE_RIGHT = Points->X; IMAGE_TOP= IMAGE_BOTTOM = Points->Y; for(i = 1; i < PointCount; i++) { pixelX = POLY_X(i); if(pixelX < IMAGE_LEFT) { IMAGE_LEFT = pixelX; } if(pixelX > IMAGE_RIGHT) { IMAGE_RIGHT = pixelX; } pixelY = POLY_Y(i); if(pixelY < IMAGE_TOP) { IMAGE_TOP = pixelY; } if(pixelY > IMAGE_BOTTOM) { IMAGE_BOTTOM = pixelY; } } LCD_SetTextColor(BackColor); /* Loop through the rows of the image. */ for (pixelY = IMAGE_TOP; pixelY < IMAGE_BOTTOM; pixelY++) { /* Build a list of nodes. */ nodes = 0; j = PointCount-1; for (i = 0; i < PointCount; i++) { if (POLY_Y(i)<(double) pixelY && POLY_Y(j)>=(double) pixelY || POLY_Y(j)<(double) pixelY && POLY_Y(i)>=(double) pixelY) { nodeX[nodes++]=(int) (POLY_X(i)+((pixelY-POLY_Y(i))*(POLY_X(j)-POLY_X(i)))/(POLY_Y(j)-POLY_Y(i))); } j = i; } /* Sort the nodes, via a simple “Bubble” sort. */ i = 0; while (i < nodes-1) { if (nodeX[i]>nodeX[i+1]) { swap = nodeX[i]; nodeX[i] = nodeX[i+1]; nodeX[i+1] = swap; if(i) { i--; } } else { i++; } } /* Fill the pixels between node pairs. */ for (i = 0; i < nodes; i+=2) { if(nodeX[i] >= IMAGE_RIGHT) { break; } if(nodeX[i+1] > IMAGE_LEFT) { if (nodeX[i] < IMAGE_LEFT) { nodeX[i]=IMAGE_LEFT; } if(nodeX[i+1] > IMAGE_RIGHT) { nodeX[i+1] = IMAGE_RIGHT; } LCD_SetTextColor(BackColor); LCD_DrawLine(pixelY, nodeX[i+1], nodeX[i+1] - nodeX[i], LCD_DIR_HORIZONTAL); LCD_SetTextColor(TextColor); PutPixel(pixelY, nodeX[i+1]); PutPixel(pixelY, nodeX[i]); /* for (j=nodeX[i]; j<nodeX[i+1]; j++) PutPixel(j,pixelY); */ } } } /* draw the edges */ LCD_SetTextColor(TextColor); } /** * @brief Reset LCD control line(/CS) and Send Start-Byte * @param Start_Byte: the Start-Byte to be sent * @retval None */ void LCD_nCS_StartByte(uint8_t Start_Byte) { LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_RESET); SPI_SendData(LCD_SPI, Start_Byte); while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } } /** * @brief Writes index to select the LCD register. * @param LCD_Reg: address of the selected register. * @retval None */ void LCD_WriteRegIndex(uint8_t LCD_Reg) { /* Reset LCD control line(/CS) and Send Start-Byte */ LCD_nCS_StartByte(START_BYTE | SET_INDEX); /* Write 16-bit Reg Index (High Byte is 0) */ SPI_SendData(LCD_SPI, 0x00); while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } SPI_SendData(LCD_SPI, LCD_Reg); while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); } /** * @brief Writes to the selected LCD ILI9320 register. * @param LCD_Reg: address of the selected register. * @param LCD_RegValue: value to write to the selected register. * @retval None */ void LCD_WriteReg(uint8_t LCD_Reg, uint16_t LCD_RegValue) { /* Write 16-bit Index (then Write Reg) */ LCD_WriteRegIndex(LCD_Reg); /* Write 16-bit Reg */ /* Reset LCD control line(/CS) and Send Start-Byte */ LCD_nCS_StartByte(START_BYTE | LCD_WRITE_REG); SPI_SendData(LCD_SPI, LCD_RegValue >> 8); while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } SPI_SendData(LCD_SPI, (LCD_RegValue & 0xFF)); while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); } /** * @brief Reads the selected LCD Register. * @param LCD_Reg: address of the selected register. * @retval LCD Register Value. */ uint16_t LCD_ReadReg(uint8_t LCD_Reg) { uint16_t tmp = 0; uint8_t i = 0; /* LCD_SPI prescaler: 4 */ LCD_SPI->CR1 &= 0xFFC7; LCD_SPI->CR1 |= 0x0008; /* Write 16-bit Index (then Read Reg) */ LCD_WriteRegIndex(LCD_Reg); /* Read 16-bit Reg */ /* Reset LCD control line(/CS) and Send Start-Byte */ LCD_nCS_StartByte(START_BYTE | LCD_READ_REG); for(i = 0; i < 5; i++) { SPI_SendData(LCD_SPI, 0xFF); while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } /* One byte of invalid dummy data read after the start byte */ while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_RXNE) == RESET) { } SPI_ReceiveData(LCD_SPI); } SPI_SendData(LCD_SPI, 0xFF); /* Read upper byte */ while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } /* Read lower byte */ while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_RXNE) == RESET) { } tmp = SPI_ReceiveData(LCD_SPI); SPI_SendData(LCD_SPI, 0xFF); while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } /* Read lower byte */ while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_RXNE) == RESET) { } tmp = ((tmp & 0xFF) << 8) | SPI_ReceiveData(LCD_SPI); LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); /* LCD_SPI prescaler: 2 */ LCD_SPI->CR1 &= 0xFFC7; return tmp; } /** * @brief Prepare to write to the LCD RAM. * @param None * @retval None */ void LCD_WriteRAM_Prepare(void) { LCD_WriteRegIndex(LCD_REG_34); /* Select GRAM Reg */ /* Reset LCD control line(/CS) and Send Start-Byte */ LCD_nCS_StartByte(START_BYTE | LCD_WRITE_REG); } /** * @brief Writes 1 word to the LCD RAM. * @param RGB_Code: the pixel color in RGB mode (5-6-5). * @retval None */ void LCD_WriteRAMWord(uint16_t RGB_Code) { LCD_WriteRAM_Prepare(); LCD_WriteRAM(RGB_Code); LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); } /** * @brief Writes to the LCD RAM. * @param RGB_Code: the pixel color in RGB mode (5-6-5). * @retval None */ void LCD_WriteRAM(uint16_t RGB_Code) { SPI_SendData(LCD_SPI, RGB_Code >> 8); while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } SPI_SendData(LCD_SPI, RGB_Code & 0xFF); while(SPI_GetFlagStatus(LCD_SPI, SPI_FLAG_BSY) != RESET) { } } /** * @brief Power on the LCD. * @param None * @retval None */ void LCD_PowerOn(void) { /* Power On sequence ---------------------------------------------------------*/ LCD_WriteReg(LCD_REG_16, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */ LCD_WriteReg(LCD_REG_17, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */ LCD_WriteReg(LCD_REG_18, 0x0000); /* VREG1OUT voltage */ LCD_WriteReg(LCD_REG_19, 0x0000); /* VDV[4:0] for VCOM amplitude */ _delay_(20); /* Dis-charge capacitor power voltage (200ms) */ LCD_WriteReg(LCD_REG_16, 0x17B0); /* SAP, BT[3:0], AP, DSTB, SLP, STB */ LCD_WriteReg(LCD_REG_17, 0x0137); /* DC1[2:0], DC0[2:0], VC[2:0] */ _delay_(5); /* Delay 50 ms */ LCD_WriteReg(LCD_REG_18, 0x0139); /* VREG1OUT voltage */ _delay_(5); /* delay 50 ms */ LCD_WriteReg(LCD_REG_19, 0x1d00); /* VDV[4:0] for VCOM amplitude */ LCD_WriteReg(LCD_REG_41, 0x0013); /* VCM[4:0] for VCOMH */ _delay_(5); /* delay 50 ms */ LCD_WriteReg(LCD_REG_7, 0x0173); /* 262K color and display ON */ } /** * @brief Enables the Display. * @param None * @retval None */ void LCD_DisplayOn(void) { /* Display On */ LCD_WriteReg(LCD_REG_7, 0x0173); /* 262K color and display ON */ } /** * @brief Disables the Display. * @param None * @retval None */ void LCD_DisplayOff(void) { /* Display Off */ LCD_WriteReg(LCD_REG_7, 0x0); } /** * @brief Configures LCD control lines in Output Push-Pull mode. * @param None * @retval None */ void LCD_CtrlLinesConfig(void) { GPIO_InitTypeDef GPIO_InitStructure; RCC_AHBPeriphClockCmd(LCD_NCS_GPIO_CLK, ENABLE); /* Configure NCS (PF.02) in Output Push-Pull mode */ GPIO_InitStructure.GPIO_Pin = LCD_NCS_PIN; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; GPIO_Init(LCD_NCS_GPIO_PORT, &GPIO_InitStructure); LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET); } /** * @brief Sets or reset LCD control lines. * @param GPIOx: where x can be B or D to select the GPIO peripheral. * @param CtrlPins: the Control line. * This parameter can be: * @arg LCD_NCS_PIN: Chip Select pin * @arg LCD_NWR_PIN: Read/Write Selection pin * @arg LCD_RS_PIN: Register/RAM Selection pin * @param BitVal: specifies the value to be written to the selected bit. * This parameter can be: * @arg Bit_RESET: to clear the port pin * @arg Bit_SET: to set the port pin * @retval None */ void LCD_CtrlLinesWrite(GPIO_TypeDef* GPIOx, uint16_t CtrlPins, BitAction BitVal) { /* Set or Reset the control line */ GPIO_WriteBit(GPIOx, CtrlPins, BitVal); } /** * @brief Configures the LCD_SPI interface. * @param None * @retval None */ void LCD_SPIConfig(void) { SPI_InitTypeDef SPI_InitStructure; GPIO_InitTypeDef GPIO_InitStructure; /* Enable LCD_SPI_SCK_GPIO_CLK, LCD_SPI_MISO_GPIO_CLK and LCD_SPI_MOSI_GPIO_CLK clock */ RCC_AHBPeriphClockCmd(LCD_SPI_SCK_GPIO_CLK | LCD_SPI_MISO_GPIO_CLK | LCD_SPI_MOSI_GPIO_CLK, ENABLE); /* Enable LCD_SPI and SYSCFG clock */ RCC_APB2PeriphClockCmd(LCD_SPI_CLK | RCC_APB2Periph_SYSCFG, ENABLE); /* Configure LCD_SPI SCK pin */ GPIO_InitStructure.GPIO_Pin = LCD_SPI_SCK_PIN; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; GPIO_Init(LCD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure); /* Configure LCD_SPI MISO pin */ GPIO_InitStructure.GPIO_Pin = LCD_SPI_MISO_PIN; GPIO_Init(LCD_SPI_MISO_GPIO_PORT, &GPIO_InitStructure); /* Configure LCD_SPI MOSI pin */ GPIO_InitStructure.GPIO_Pin = LCD_SPI_MOSI_PIN; GPIO_Init(LCD_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure); /* Connect PE.13 to SPI SCK */ GPIO_PinAFConfig(LCD_SPI_SCK_GPIO_PORT, LCD_SPI_SCK_SOURCE, LCD_SPI_SCK_AF); /* Connect PE.14 to SPI MISO */ GPIO_PinAFConfig(LCD_SPI_MISO_GPIO_PORT, LCD_SPI_MISO_SOURCE, LCD_SPI_MISO_AF); /* Connect PE.15 to SPI MOSI */ GPIO_PinAFConfig(LCD_SPI_MOSI_GPIO_PORT, LCD_SPI_MOSI_SOURCE, LCD_SPI_MOSI_AF); SPI_DeInit(LCD_SPI); /* SPI Config */ SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; SPI_InitStructure.SPI_Mode = SPI_Mode_Master; SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; SPI_InitStructure.SPI_CPOL = SPI_CPOL_High; SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge; SPI_InitStructure.SPI_NSS = SPI_NSS_Soft; SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; SPI_InitStructure.SPI_CRCPolynomial = 7; SPI_Init(LCD_SPI, &SPI_InitStructure); /* SPI enable */ SPI_Cmd(LCD_SPI, ENABLE); } /** * @brief Displays a pixel. * @param x: pixel x. * @param y: pixel y. * @retval None */ static void PutPixel(int16_t x, int16_t y) { if(x < 0 || x > 239 || y < 0 || y > 319) { return; } LCD_DrawLine(x, y, 1, LCD_DIR_HORIZONTAL); } #ifndef USE_Delay /** * @brief Inserts a delay time. * @param nCount: specifies the delay time length. * @retval None */ static void delay(__IO uint32_t nCount) { __IO uint32_t index = 0; for(index = (34000 * nCount); index != 0; index--) { } } #endif /* USE_Delay*/ /** * @} */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ /******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
Go to most recent revision | Compare with Previous | Blame | View Log