URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_STM32L152_IAR/] [system_and_ST_code/] [STM32L1xx_StdPeriph_Driver/] [inc/] [stm32l1xx_gpio.h] - Rev 606
Go to most recent revision | Compare with Previous | Blame | View Log
/** ****************************************************************************** * @file stm32l1xx_gpio.h * @author MCD Application Team * @version V1.0.0RC1 * @date 07/02/2010 * @brief This file contains all the functions prototypes for the GPIO * firmware library. ****************************************************************************** * @copy * * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * * <h2><center>© COPYRIGHT 2010 STMicroelectronics</center></h2> */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L1xx_GPIO_H #define __STM32L1xx_GPIO_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32l1xx.h" /** @addtogroup STM32L1xx_StdPeriph_Driver * @{ */ /** @addtogroup GPIO * @{ */ /** @defgroup GPIO_Exported_Types * @{ */ #define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ ((PERIPH) == GPIOB) || \ ((PERIPH) == GPIOC) || \ ((PERIPH) == GPIOD) || \ ((PERIPH) == GPIOE) || \ ((PERIPH) == GPIOH)) /** @defgroup Configuration_Mode_enumeration * @{ */ typedef enum { GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */ GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */ GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */ GPIO_Mode_AN = 0x03 /*!< GPIO Analog Mode */ }GPIOMode_TypeDef; #define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN) || ((MODE) == GPIO_Mode_OUT) || \ ((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN)) /** * @} */ /** @defgroup Output_type_enumeration * @{ */ typedef enum { GPIO_OType_PP = 0x00, GPIO_OType_OD = 0x01 }GPIOOType_TypeDef; #define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD)) /** * @} */ /** @defgroup Output_Maximum_frequency_enumeration * @{ */ typedef enum { GPIO_Speed_400KHz = 0x00, /*!< Very Low Speed */ GPIO_Speed_2MHz = 0x01, /*!< Low Speed */ GPIO_Speed_10MHz = 0x02, /*!< Medium Speed */ GPIO_Speed_40MHz = 0x03 /*!< High Speed */ }GPIOSpeed_TypeDef; #define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_400KHz) || ((SPEED) == GPIO_Speed_2MHz) || \ ((SPEED) == GPIO_Speed_10MHz)|| ((SPEED) == GPIO_Speed_40MHz)) /** * @} */ /** @defgroup Configuration_Pull-Up_Pull-Down_enumeration * @{ */ typedef enum { GPIO_PuPd_NOPULL = 0x00, GPIO_PuPd_UP = 0x01, GPIO_PuPd_DOWN = 0x02 }GPIOPuPd_TypeDef; #define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \ ((PUPD) == GPIO_PuPd_DOWN)) /** * @} */ /** @defgroup Bit_SET_and_Bit_RESET_enumeration * @{ */ typedef enum { Bit_RESET = 0, Bit_SET }BitAction; #define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) /** * @} */ /** * @brief GPIO Init structure definition */ typedef struct { uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. This parameter can be any value of @ref GPIO_pins_define */ GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. This parameter can be a value of @ref GPIOMode_TypeDef */ GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. This parameter can be a value of @ref GPIOSpeed_TypeDef */ GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins. This parameter can be a value of @ref GPIOOType_TypeDef */ GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins. This parameter can be a value of @ref GPIOPuPd_TypeDef */ }GPIO_InitTypeDef; /** * @} */ /** @defgroup GPIO_Exported_Constants * @{ */ /** * @} */ /** @defgroup GPIO_pins_define * @{ */ #define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ #define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ #define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ #define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ #define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ #define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ #define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ #define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ #define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ #define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ #define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ #define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ #define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ #define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ #define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ #define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ #define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */ #define IS_GPIO_PIN(PIN) ((PIN) != (uint16_t)0x00) #define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ ((PIN) == GPIO_Pin_1) || \ ((PIN) == GPIO_Pin_2) || \ ((PIN) == GPIO_Pin_3) || \ ((PIN) == GPIO_Pin_4) || \ ((PIN) == GPIO_Pin_5) || \ ((PIN) == GPIO_Pin_6) || \ ((PIN) == GPIO_Pin_7) || \ ((PIN) == GPIO_Pin_8) || \ ((PIN) == GPIO_Pin_9) || \ ((PIN) == GPIO_Pin_10) || \ ((PIN) == GPIO_Pin_11) || \ ((PIN) == GPIO_Pin_12) || \ ((PIN) == GPIO_Pin_13) || \ ((PIN) == GPIO_Pin_14) || \ ((PIN) == GPIO_Pin_15)) /** * @} */ /** @defgroup GPIO_Pin_sources * @{ */ #define GPIO_PinSource0 ((uint8_t)0x00) #define GPIO_PinSource1 ((uint8_t)0x01) #define GPIO_PinSource2 ((uint8_t)0x02) #define GPIO_PinSource3 ((uint8_t)0x03) #define GPIO_PinSource4 ((uint8_t)0x04) #define GPIO_PinSource5 ((uint8_t)0x05) #define GPIO_PinSource6 ((uint8_t)0x06) #define GPIO_PinSource7 ((uint8_t)0x07) #define GPIO_PinSource8 ((uint8_t)0x08) #define GPIO_PinSource9 ((uint8_t)0x09) #define GPIO_PinSource10 ((uint8_t)0x0A) #define GPIO_PinSource11 ((uint8_t)0x0B) #define GPIO_PinSource12 ((uint8_t)0x0C) #define GPIO_PinSource13 ((uint8_t)0x0D) #define GPIO_PinSource14 ((uint8_t)0x0E) #define GPIO_PinSource15 ((uint8_t)0x0F) #define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ ((PINSOURCE) == GPIO_PinSource1) || \ ((PINSOURCE) == GPIO_PinSource2) || \ ((PINSOURCE) == GPIO_PinSource3) || \ ((PINSOURCE) == GPIO_PinSource4) || \ ((PINSOURCE) == GPIO_PinSource5) || \ ((PINSOURCE) == GPIO_PinSource6) || \ ((PINSOURCE) == GPIO_PinSource7) || \ ((PINSOURCE) == GPIO_PinSource8) || \ ((PINSOURCE) == GPIO_PinSource9) || \ ((PINSOURCE) == GPIO_PinSource10) || \ ((PINSOURCE) == GPIO_PinSource11) || \ ((PINSOURCE) == GPIO_PinSource12) || \ ((PINSOURCE) == GPIO_PinSource13) || \ ((PINSOURCE) == GPIO_PinSource14) || \ ((PINSOURCE) == GPIO_PinSource15)) /** * @} */ /** @defgroup GPIO_Alternat_function_selection_define * @{ */ /** * @brief AF 0 selection */ #define GPIO_AF_RTC_50Hz ((uint8_t)0x00) /*!< RTC 50/60 Hz Alternate Function mapping */ #define GPIO_AF_MCO ((uint8_t)0x00) /*!< MCO Alternate Function mapping */ #define GPIO_AF_RTC_AF1 ((uint8_t)0x00) /*!< RTC_AF1 Alternate Function mapping */ #define GPIO_AF_WKUP ((uint8_t)0x00) /*!< Wakeup (WKUP1, WKUP2 and WKUP3) Alternate Function mapping */ #define GPIO_AF_SWJ ((uint8_t)0x00) /*!< SWJ (SW and JTAG) Alternate Function mapping */ #define GPIO_AF_TRACE ((uint8_t)0x00) /*!< TRACE Alternate Function mapping */ /** * @brief AF 1 selection */ #define GPIO_AF_TIM2 ((uint8_t)0x01) /*!< TIM2 Alternate Function mapping */ /** * @brief AF 2 selection */ #define GPIO_AF_TIM3 ((uint8_t)0x02) /*!< TIM3 Alternate Function mapping */ #define GPIO_AF_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ /** * @brief AF 3 selection */ #define GPIO_AF_TIM9 ((uint8_t)0x03) /*!< TIM9 Alternate Function mapping */ #define GPIO_AF_TIM10 ((uint8_t)0x03) /*!< TIM10 Alternate Function mapping */ #define GPIO_AF_TIM11 ((uint8_t)0x03) /*!< TIM11 Alternate Function mapping */ /** * @brief AF 4 selection */ #define GPIO_AF_I2C1 ((uint8_t)0x04) /*!< I2C1 Alternate Function mapping */ #define GPIO_AF_I2C2 ((uint8_t)0x04) /*!< I2C2 Alternate Function mapping */ /** * @brief AF 5 selection */ #define GPIO_AF_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ #define GPIO_AF_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ /** * @brief AF 7 selection */ #define GPIO_AF_USART1 ((uint8_t)0x07) /*!< USART1 Alternate Function mapping */ #define GPIO_AF_USART2 ((uint8_t)0x07) /*!< USART2 Alternate Function mapping */ #define GPIO_AF_USART3 ((uint8_t)0x07) /*!< USART3 Alternate Function mapping */ /** * @brief AF 10 selection */ #define GPIO_AF_USB ((uint8_t)0xA) /*!< USB Full speed device Alternate Function mapping */ /** * @brief AF 11 selection */ #define GPIO_AF_LCD ((uint8_t)0x0B) /*!< LCD Alternate Function mapping */ /** * @brief AF 14 selection */ #define GPIO_AF_RI ((uint8_t)0x0E) /*!< RI Alternate Function mapping */ /** * @brief AF 15 selection */ #define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /*!< EVENTOUT Alternate Function mapping */ #define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_MCO) || \ ((AF) == GPIO_AF_RTC_AF1) || ((AF) == GPIO_AF_WKUP) || \ ((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \ ((AF) == GPIO_AF_TIM2) || ((AF)== GPIO_AF_TIM3) || \ ((AF) == GPIO_AF_TIM4) || ((AF)== GPIO_AF_TIM9) || \ ((AF) == GPIO_AF_TIM10) || ((AF)== GPIO_AF_TIM11) || \ ((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \ ((AF) == GPIO_AF_SPI1) || ((AF) == GPIO_AF_SPI2) || \ ((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \ ((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_USB) || \ ((AF) == GPIO_AF_LCD) || ((AF) == GPIO_AF_RI) || \ ((AF) == GPIO_AF_EVENTOUT)) /** * @} */ /** @defgroup GPIO_Legacy * @{ */ #define GPIO_Mode_AIN GPIO_Mode_AN /** * @} */ /** @defgroup GPIO_Exported_Macros * @{ */ /** * @} */ /** @defgroup GPIO_Exported_Functions * @{ */ void GPIO_DeInit(GPIO_TypeDef* GPIOx); void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF); #ifdef __cplusplus } #endif #endif /*__STM32L1xx_GPIO_H */ /** * @} */ /** * @} */ /** * @} */ /******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
Go to most recent revision | Compare with Previous | Blame | View Log