URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_STM32L152_IAR/] [system_and_ST_code/] [STM32L1xx_StdPeriph_Driver/] [inc/] [stm32l1xx_spi.h] - Rev 602
Go to most recent revision | Compare with Previous | Blame | View Log
/** ****************************************************************************** * @file stm32l1xx_spi.h * @author MCD Application Team * @version V1.0.0RC1 * @date 07/02/2010 * @brief This file contains all the functions prototypes for the SPI * firmware library. ****************************************************************************** * @copy * * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * * <h2><center>© COPYRIGHT 2010 STMicroelectronics</center></h2> */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L1xx_SPI_H #define __STM32L1xx_SPI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32l1xx.h" /** @addtogroup STM32L1xx_StdPeriph_Driver * @{ */ /** @addtogroup SPI * @{ */ /** @defgroup SPI_Exported_Types * @{ */ /** * @brief SPI Init structure definition */ typedef struct { uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. This parameter can be any combination of @ref SPI_data_direction */ uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. This parameter can be any combination of @ref SPI_mode */ uint16_t SPI_DataSize; /*!< Specifies the SPI data size. This parameter can be any combination of @ref SPI_data_size */ uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. This parameter can be any combination of @ref SPI_Clock_Polarity */ uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. This parameter can be any combination of @ref SPI_Clock_Phase */ uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit. This parameter can be any combination of @ref SPI_Slave_Select_management */ uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be used to configure the transmit and receive SCK clock. This parameter can be any combination of @ref SPI_BaudRate_Prescaler. @note The communication clock is derived from the master clock. The slave clock does not need to be set. */ uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. This parameter can be any combination of @ref SPI_MSB_LSB_transmission */ uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ }SPI_InitTypeDef; /** * @} */ /** @defgroup SPI_Exported_Constants * @{ */ #define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ ((PERIPH) == SPI2)) /** @defgroup SPI_data_direction * @{ */ #define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) #define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) #define SPI_Direction_1Line_Rx ((uint16_t)0x8000) #define SPI_Direction_1Line_Tx ((uint16_t)0xC000) #define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ ((MODE) == SPI_Direction_2Lines_RxOnly) || \ ((MODE) == SPI_Direction_1Line_Rx) || \ ((MODE) == SPI_Direction_1Line_Tx)) /** * @} */ /** @defgroup SPI_mode * @{ */ #define SPI_Mode_Master ((uint16_t)0x0104) #define SPI_Mode_Slave ((uint16_t)0x0000) #define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ ((MODE) == SPI_Mode_Slave)) /** * @} */ /** @defgroup SPI_data_size * @{ */ #define SPI_DataSize_16b ((uint16_t)0x0800) #define SPI_DataSize_8b ((uint16_t)0x0000) #define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ ((DATASIZE) == SPI_DataSize_8b)) /** * @} */ /** @defgroup SPI_Clock_Polarity * @{ */ #define SPI_CPOL_Low ((uint16_t)0x0000) #define SPI_CPOL_High ((uint16_t)0x0002) #define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ ((CPOL) == SPI_CPOL_High)) /** * @} */ /** @defgroup SPI_Clock_Phase * @{ */ #define SPI_CPHA_1Edge ((uint16_t)0x0000) #define SPI_CPHA_2Edge ((uint16_t)0x0001) #define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ ((CPHA) == SPI_CPHA_2Edge)) /** * @} */ /** @defgroup SPI_Slave_Select_management * @{ */ #define SPI_NSS_Soft ((uint16_t)0x0200) #define SPI_NSS_Hard ((uint16_t)0x0000) #define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ ((NSS) == SPI_NSS_Hard)) /** * @} */ /** @defgroup SPI_BaudRate_Prescaler * @{ */ #define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) #define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) #define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) #define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) #define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) #define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) #define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) #define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) #define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ ((PRESCALER) == SPI_BaudRatePrescaler_256)) /** * @} */ /** @defgroup SPI_MSB_LSB_transmission * @{ */ #define SPI_FirstBit_MSB ((uint16_t)0x0000) #define SPI_FirstBit_LSB ((uint16_t)0x0080) #define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ ((BIT) == SPI_FirstBit_LSB)) /** * @} */ /** @defgroup SPI_DMA_transfer_requests * @{ */ #define SPI_DMAReq_Tx ((uint16_t)0x0002) #define SPI_DMAReq_Rx ((uint16_t)0x0001) #define IS_SPI_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) /** * @} */ /** @defgroup SPI_NSS_internal_software_mangement * @{ */ #define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) #define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) #define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ ((INTERNAL) == SPI_NSSInternalSoft_Reset)) /** * @} */ /** @defgroup SPI_CRC_Transmit_Receive * @{ */ #define SPI_CRC_Tx ((uint8_t)0x00) #define SPI_CRC_Rx ((uint8_t)0x01) #define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) /** * @} */ /** @defgroup SPI_direction_transmit_receive * @{ */ #define SPI_Direction_Rx ((uint16_t)0xBFFF) #define SPI_Direction_Tx ((uint16_t)0x4000) #define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ ((DIRECTION) == SPI_Direction_Tx)) /** * @} */ /** @defgroup SPI_interrupts_definition * @{ */ #define SPI_IT_TXE ((uint8_t)0x71) #define SPI_IT_RXNE ((uint8_t)0x60) #define SPI_IT_ERR ((uint8_t)0x50) #define IS_SPI_CONFIG_IT(IT) (((IT) == SPI_IT_TXE) || \ ((IT) == SPI_IT_RXNE) || \ ((IT) == SPI_IT_ERR)) #define SPI_IT_OVR ((uint8_t)0x56) #define SPI_IT_MODF ((uint8_t)0x55) #define SPI_IT_CRCERR ((uint8_t)0x54) #define IS_SPI_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) #define IS_SPI_GET_IT(IT) (((IT) == SPI_IT_RXNE) || ((IT) == SPI_IT_TXE) || \ ((IT) == SPI_IT_CRCERR) || \ ((IT) == SPI_IT_MODF) || ((IT) == SPI_IT_OVR)) /** * @} */ /** @defgroup SPI_flags_definition * @{ */ #define SPI_FLAG_RXNE ((uint16_t)0x0001) #define SPI_FLAG_TXE ((uint16_t)0x0002) #define SPI_FLAG_CRCERR ((uint16_t)0x0010) #define SPI_FLAG_MODF ((uint16_t)0x0020) #define SPI_FLAG_OVR ((uint16_t)0x0040) #define SPI_FLAG_BSY ((uint16_t)0x0080) #define IS_SPI_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) #define IS_SPI_GET_FLAG(FLAG) (((FLAG) == SPI_FLAG_BSY) || ((FLAG) == SPI_FLAG_OVR) || \ ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ ((FLAG) == SPI_FLAG_TXE) || ((FLAG) == SPI_FLAG_RXNE)) /** * @} */ /** @defgroup SPI_CRC_polynomial * @{ */ #define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) /** * @} */ /** @defgroup SPI_Legacy * @{ */ #define SPI_I2S_DMAReq_Tx SPI_DMAReq_Tx #define SPI_I2S_DMAReq_Rx SPI_DMAReq_Rx #define SPI_I2S_IT_TXE SPI_IT_TXE #define SPI_I2S_IT_RXNE SPI_IT_RXNE #define SPI_I2S_IT_ERR SPI_IT_ERR #define SPI_I2S_IT_OVR SPI_IT_OVR #define SPI_I2S_FLAG_RXNE SPI_FLAG_RXNE #define SPI_I2S_FLAG_TXE SPI_FLAG_TXE #define SPI_I2S_FLAG_OVR SPI_FLAG_OVR #define SPI_I2S_FLAG_BSY SPI_FLAG_BSY #define SPI_I2S_DeInit SPI_DeInit #define SPI_I2S_ITConfig SPI_ITConfig #define SPI_I2S_DMACmd SPI_DMACmd #define SPI_I2S_SendData SPI_SendData #define SPI_I2S_ReceiveData SPI_ReceiveData #define SPI_I2S_GetFlagStatus SPI_GetFlagStatus #define SPI_I2S_ClearFlag SPI_ClearFlag #define SPI_I2S_GetITStatus SPI_GetITStatus #define SPI_I2S_ClearITPendingBit SPI_ClearITPendingBit /** * @} */ /** * @} */ /** @defgroup SPI_Exported_Macros * @{ */ /** * @} */ /** @defgroup SPI_Exported_Functions * @{ */ void SPI_DeInit(SPI_TypeDef* SPIx); void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); void SPI_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_IT, FunctionalState NewState); void SPI_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_DMAReq, FunctionalState NewState); void SPI_SendData(SPI_TypeDef* SPIx, uint16_t Data); uint16_t SPI_ReceiveData(SPI_TypeDef* SPIx); void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); void SPI_TransmitCRC(SPI_TypeDef* SPIx); void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); FlagStatus SPI_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_FLAG); void SPI_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_FLAG); ITStatus SPI_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_IT); void SPI_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_IT); #ifdef __cplusplus } #endif #endif /*__STM32l15x_SPI_H */ /** * @} */ /** * @} */ /** * @} */ /******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
Go to most recent revision | Compare with Previous | Blame | View Log