OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ColdFire_MCF51CN128_CodeWarrior/] [Sources/] [startcf.h] - Rev 621

Go to most recent revision | Compare with Previous | Blame | View Log

/******************************************************************************
  FILE    : startcf.h
  PURPOSE : startup code for ColdFire
  LANGUAGE: C
 
 
  Notes:
        1) Default entry point is _startup. 
           . disable interrupts
           . the SP is set to __SP_AFTER_RESET
           . SP must be initialized to valid memory 
             in case the memory it points to is not valid using MEMORY_INIT macro
        2) __initialize_hardware is called. Here you can initialize memory and some peripherics
           at this point global variables are not initialized yet
        3) After __initialize_hardware memory is setup; initialize SP to _SP_INIT and perform 
           needed initialisations for the language (clear memory, data rom copy).
        4) void __initialize_system(void); is called
           to allow additional hardware initialization (UART, GPIOs, etc...)
        5) Jump to main 
 
*/
/********************************************************************************/
 
#ifndef STARTCF_H
#define STARTCF_H
 
 
#ifdef __cplusplus
extern "C" {
#endif
 
#ifdef STARTCF_INCLUDE
#include STARTCF_INCLUDE
#endif
 
#pragma warn_any_ptr_int_conv off
#pragma warn_absolute off
 
extern unsigned long far __SP_INIT[];
extern unsigned long far __SP_AFTER_RESET[];
 
#ifndef MEMORY_INIT
/* If MEMORY_INIT is set then it performs
   minimal memory initialization (to preset SP to __SP_AFTER_RESET, etc...) 
*/
#define MEMORY_INIT
#endif
 
void _startup(void);
 
#ifndef SUPPORT_ROM_TO_RAM
  /*
   * If SUPPORT_ROM_TO_RAM is set, _S_romp is used to define the copy to be performed.
   * If it is not set, there's a single block to copy, performed directly without 
   * using the __S_romp structure, based on __DATA_RAM, __DATA_ROM and
   * __DATA_END symbols.
   *
   * Set to 0 for more aggressive dead stripping ...
   */
#define SUPPORT_ROM_TO_RAM 1
#endif
 
/* format of the ROM table info entry ... */
typedef struct RomInfo {
	void            *Source;
	void            *Target;
	unsigned long    Size;
} RomInfo;
 
/* imported data */
extern far RomInfo _S_romp[];		/* linker defined symbol */
 
#ifdef __cplusplus
}
#endif
 
#endif
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.