URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ColdFire_MCF52221_CodeWarrior/] [sources/] [lwipopts.h] - Rev 841
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels <adam@sics.se> * */ #ifndef __LWIPOPTS_H__ #define __LWIPOPTS_H__ #define TCPIP_THREAD_NAME "tcp/ip" #define TCPIP_THREAD_STACKSIZE 350 #define TCPIP_THREAD_PRIO 2 #define DEFAULT_THREAD_STACKSIZE 200 #define DEFAULT_THREAD_PRIO 1 #define ETH_PAD_SIZE 2 #define NOT_LWIP_DEBUG 0 #define DBG_TYPES_ON 0x00 #define LWIP_DBG_TYPES_ON LWIP_DBG_OFF #define ETHARP_DEBUG LWIP_DBG_OFF #define NETIF_DEBUG LWIP_DBG_OFF #define PBUF_DEBUG LWIP_DBG_OFF #define API_LIB_DEBUG LWIP_DBG_OFF #define API_MSG_DEBUG LWIP_DBG_OFF #define SOCKETS_DEBUG LWIP_DBG_OFF #define ICMP_DEBUG LWIP_DBG_OFF #define IGMP_DEBUG LWIP_DBG_OFF #define INET_DEBUG LWIP_DBG_OFF #define IP_DEBUG LWIP_DBG_OFF #define IP_REASS_DEBUG LWIP_DBG_OFF #define RAW_DEBUG LWIP_DBG_OFF #define MEM_DEBUG LWIP_DBG_OFF #define MEMP_DEBUG LWIP_DBG_OFF #define SYS_DEBUG LWIP_DBG_OFF #define TCP_DEBUG LWIP_DBG_OFF #define TCP_INPUT_DEBUG LWIP_DBG_OFF #define TCP_FR_DEBUG LWIP_DBG_OFF #define TCP_RTO_DEBUG LWIP_DBG_OFF #define TCP_CWND_DEBUG LWIP_DBG_OFF #define TCP_WND_DEBUG LWIP_DBG_OFF #define TCP_OUTPUT_DEBUG LWIP_DBG_OFF #define TCP_RST_DEBUG LWIP_DBG_OFF #define TCP_QLEN_DEBUG LWIP_DBG_OFF #define UDP_DEBUG LWIP_DBG_OFF #define TCPIP_DEBUG LWIP_DBG_OFF #define PPP_DEBUG LWIP_DBG_OFF #define SLIP_DEBUG LWIP_DBG_OFF #define DHCP_DEBUG LWIP_DBG_OFF #define AUTOIP_DEBUG LWIP_DBG_OFF #define SNMP_MSG_DEBUG LWIP_DBG_OFF #define SNMP_MIB_DEBUG LWIP_DBG_OFF #define DNS_DEBUG LWIP_DBG_OFF #define LWIP_NOASSERT 0 #define ETHARP_TRUST_IP_MAC 0 #define LWIP_UDP 0 /** * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain * critical regions during buffer allocation, deallocation and memory * allocation and deallocation. */ #define SYS_LIGHTWEIGHT_PROT 1 /* ------------------------------------ ---------- Memory options ---------- ------------------------------------ */ /** * MEM_ALIGNMENT: should be set to the alignment of the CPU * 4 byte alignment -> #define MEM_ALIGNMENT 4 * 2 byte alignment -> #define MEM_ALIGNMENT 2 */ #define MEM_ALIGNMENT 4 /** * MEM_SIZE: the size of the heap memory. If the application will send * a lot of data that needs to be copied, this should be set high. */ #define MEM_SIZE (8*1024) /* ------------------------------------------------ ---------- Internal Memory Pool Sizes ---------- ------------------------------------------------ */ /** * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). * If the application sends a lot of data out of ROM (or other static memory), * this should be set high. */ #define MEMP_NUM_PBUF 20 /** * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. * (requires the LWIP_TCP option) */ #define MEMP_NUM_TCP_PCB 10 /** * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. * (requires the LWIP_TCP option) */ #define MEMP_NUM_TCP_SEG 8 /** * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. * (requires NO_SYS==0) */ #define MEMP_NUM_SYS_TIMEOUT 5 /** * MEMP_NUM_NETBUF: the number of struct netbufs. * (only needed if you use the sequential API, like api_lib.c) */ #define MEMP_NUM_NETBUF 4 /** * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #define PBUF_POOL_SIZE 4 /* ---------------------------------- ---------- Pbuf options ---------- ---------------------------------- */ /** * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is * designed to accomodate single full size TCP frame in one pbuf, including * TCP_MSS, IP header, and link header. */ #define PBUF_POOL_BUFSIZE 1500 /* --------------------------------- ---------- TCP options ---------- --------------------------------- */ /** * LWIP_TCP==1: Turn on TCP. */ #define LWIP_TCP 1 /* TCP Maximum segment size. */ #define TCP_MSS 1500 /* TCP sender buffer space (bytes). */ #define TCP_SND_BUF 1500 /** * TCP_WND: The size of a TCP window. */ #define TCP_WND 1500 /** * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. */ #define TCP_SYNMAXRTX 4 /* --------------------------------- ---------- RAW options ---------- --------------------------------- */ /** * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. */ #define LWIP_RAW 0 /* ------------------------------------ ---------- Socket options ---------- ------------------------------------ */ /** * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) */ #define LWIP_SOCKET 0 /* ---------------------------------------- ---------- Statistics options ---------- ---------------------------------------- */ /** * LWIP_STATS==1: Enable statistics collection in lwip_stats. */ #define LWIP_STATS 0 /* ---------------------------------- ---------- DHCP options ---------- ---------------------------------- */ /** * LWIP_DHCP==1: Enable DHCP module. */ #define LWIP_DHCP 0 #define LWIP_PROVIDE_ERRNO 0 #endif /* __LWIPOPTS_H__ */
Go to most recent revision | Compare with Previous | Blame | View Log