URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [Common/] [Full/] [events.c] - Rev 694
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /** * This file exercises the event mechanism whereby more than one task is * blocked waiting for the same event. * * The demo creates five tasks - four 'event' tasks, and a controlling task. * The event tasks have various different priorities and all block on reading * the same queue. The controlling task writes data to the queue, then checks * to see which of the event tasks read the data from the queue. The * controlling task has the lowest priority of all the tasks so is guaranteed * to always get preempted immediately upon writing to the queue. * * By selectively suspending and resuming the event tasks the controlling task * can check that the highest priority task that is blocked on the queue is the * task that reads the posted data from the queue. * * Two of the event tasks share the same priority. When neither of these tasks * are suspended they should alternate - one reading one message from the queue, * the other the next message, etc. */ /* Standard includes. */ #include <stdlib.h> #include <stdio.h> #include <string.h> /* Scheduler include files. */ #include "FreeRTOS.h" #include "task.h" #include "queue.h" /* Demo program include files. */ #include "mevents.h" #include "print.h" /* Demo specific constants. */ #define evtSTACK_SIZE ( ( unsigned portBASE_TYPE ) configMINIMAL_STACK_SIZE ) #define evtNUM_TASKS ( 4 ) #define evtQUEUE_LENGTH ( ( unsigned portBASE_TYPE ) 3 ) #define evtNO_DELAY 0 /* Just indexes used to uniquely identify the tasks. Note that two tasks are 'highest' priority. */ #define evtHIGHEST_PRIORITY_INDEX_2 3 #define evtHIGHEST_PRIORITY_INDEX_1 2 #define evtMEDIUM_PRIORITY_INDEX 1 #define evtLOWEST_PRIORITY_INDEX 0 /* Each event task increments one of these counters each time it reads data from the queue. */ static volatile portBASE_TYPE xTaskCounters[ evtNUM_TASKS ] = { 0, 0, 0, 0 }; /* Each time the controlling task posts onto the queue it increments the expected count of the task that it expected to read the data from the queue (i.e. the task with the highest priority that should be blocked on the queue). xExpectedTaskCounters are incremented from the controlling task, and xTaskCounters are incremented from the individual event tasks - therefore comparing xTaskCounters to xExpectedTaskCounters shows whether or not the correct task was unblocked by the post. */ static portBASE_TYPE xExpectedTaskCounters[ evtNUM_TASKS ] = { 0, 0, 0, 0 }; /* Handles to the four event tasks. These are required to suspend and resume the tasks. */ static xTaskHandle xCreatedTasks[ evtNUM_TASKS ]; /* The single queue onto which the controlling task posts, and the four event tasks block. */ static xQueueHandle xQueue; /* Flag used to indicate whether or not an error has occurred at any time. An error is either the queue being full when not expected, or an unexpected task reading data from the queue. */ static portBASE_TYPE xHealthStatus = pdPASS; /*-----------------------------------------------------------*/ /* Function that implements the event task. This is created four times. */ static void prvMultiEventTask( void *pvParameters ); /* Function that implements the controlling task. */ static void prvEventControllerTask( void *pvParameters ); /* This is a utility function that posts data to the queue, then compares xExpectedTaskCounters with xTaskCounters to ensure everything worked as expected. The event tasks all have higher priorities the controlling task. Therefore the controlling task will always get preempted between writhing to the queue and checking the task counters. @param xExpectedTask The index to the task that the controlling task thinks should be the highest priority task waiting for data, and therefore the task that will unblock. @param xIncrement The number of items that should be written to the queue. */ static void prvCheckTaskCounters( portBASE_TYPE xExpectedTask, portBASE_TYPE xIncrement ); /* This is just incremented each cycle of the controlling tasks function so the main application can ensure the test is still running. */ static portBASE_TYPE xCheckVariable = 0; /*-----------------------------------------------------------*/ void vStartMultiEventTasks( void ) { /* Create the queue to be used for all the communications. */ xQueue = xQueueCreate( evtQUEUE_LENGTH, ( unsigned portBASE_TYPE ) sizeof( unsigned portBASE_TYPE ) ); /* Start the controlling task. This has the idle priority to ensure it is always preempted by the event tasks. */ xTaskCreate( prvEventControllerTask, "EvntCTRL", evtSTACK_SIZE, NULL, tskIDLE_PRIORITY, NULL ); /* Start the four event tasks. Note that two have priority 3, one priority 2 and the other priority 1. */ xTaskCreate( prvMultiEventTask, "Event0", evtSTACK_SIZE, ( void * ) &( xTaskCounters[ 0 ] ), 1, &( xCreatedTasks[ evtLOWEST_PRIORITY_INDEX ] ) ); xTaskCreate( prvMultiEventTask, "Event1", evtSTACK_SIZE, ( void * ) &( xTaskCounters[ 1 ] ), 2, &( xCreatedTasks[ evtMEDIUM_PRIORITY_INDEX ] ) ); xTaskCreate( prvMultiEventTask, "Event2", evtSTACK_SIZE, ( void * ) &( xTaskCounters[ 2 ] ), 3, &( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_1 ] ) ); xTaskCreate( prvMultiEventTask, "Event3", evtSTACK_SIZE, ( void * ) &( xTaskCounters[ 3 ] ), 3, &( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_2 ] ) ); } /*-----------------------------------------------------------*/ static void prvMultiEventTask( void *pvParameters ) { portBASE_TYPE *pxCounter; unsigned portBASE_TYPE uxDummy; const char * const pcTaskStartMsg = "Multi event task started.\r\n"; /* The variable this task will increment is passed in as a parameter. */ pxCounter = ( portBASE_TYPE * ) pvParameters; vPrintDisplayMessage( &pcTaskStartMsg ); for( ;; ) { /* Block on the queue. */ if( xQueueReceive( xQueue, &uxDummy, portMAX_DELAY ) ) { /* We unblocked by reading the queue - so simply increment the counter specific to this task instance. */ ( *pxCounter )++; } else { xHealthStatus = pdFAIL; } } } /*-----------------------------------------------------------*/ static void prvEventControllerTask( void *pvParameters ) { const char * const pcTaskStartMsg = "Multi event controller task started.\r\n"; portBASE_TYPE xDummy = 0; /* Just to stop warnings. */ ( void ) pvParameters; vPrintDisplayMessage( &pcTaskStartMsg ); for( ;; ) { /* All tasks are blocked on the queue. When a message is posted one of the two tasks that share the highest priority should unblock to read the queue. The next message written should unblock the other task with the same high priority, and so on in order. No other task should unblock to read data as they have lower priorities. */ prvCheckTaskCounters( evtHIGHEST_PRIORITY_INDEX_1, 1 ); prvCheckTaskCounters( evtHIGHEST_PRIORITY_INDEX_2, 1 ); prvCheckTaskCounters( evtHIGHEST_PRIORITY_INDEX_1, 1 ); prvCheckTaskCounters( evtHIGHEST_PRIORITY_INDEX_2, 1 ); prvCheckTaskCounters( evtHIGHEST_PRIORITY_INDEX_1, 1 ); /* For the rest of these tests we don't need the second 'highest' priority task - so it is suspended. */ vTaskSuspend( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_2 ] ); /* Now suspend the other highest priority task. The medium priority task will then be the task with the highest priority that remains blocked on the queue. */ vTaskSuspend( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_1 ] ); /* This time, when we post onto the queue we will expect the medium priority task to unblock and preempt us. */ prvCheckTaskCounters( evtMEDIUM_PRIORITY_INDEX, 1 ); /* Now try resuming the highest priority task while the scheduler is suspended. The task should start executing as soon as the scheduler is resumed - therefore when we post to the queue again, the highest priority task should again preempt us. */ vTaskSuspendAll(); vTaskResume( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_1 ] ); xTaskResumeAll(); prvCheckTaskCounters( evtHIGHEST_PRIORITY_INDEX_1, 1 ); /* Now we are going to suspend the high and medium priority tasks. The low priority task should then preempt us. Again the task suspension is done with the whole scheduler suspended just for test purposes. */ vTaskSuspendAll(); vTaskSuspend( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_1 ] ); vTaskSuspend( xCreatedTasks[ evtMEDIUM_PRIORITY_INDEX ] ); xTaskResumeAll(); prvCheckTaskCounters( evtLOWEST_PRIORITY_INDEX, 1 ); /* Do the same basic test another few times - selectively suspending and resuming tasks and each time calling prvCheckTaskCounters() passing to the function the number of the task we expected to be unblocked by the post. */ vTaskResume( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_1 ] ); prvCheckTaskCounters( evtHIGHEST_PRIORITY_INDEX_1, 1 ); vTaskSuspendAll(); /* Just for test. */ vTaskSuspendAll(); /* Just for test. */ vTaskSuspendAll(); /* Just for even more test. */ vTaskSuspend( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_1 ] ); xTaskResumeAll(); xTaskResumeAll(); xTaskResumeAll(); prvCheckTaskCounters( evtLOWEST_PRIORITY_INDEX, 1 ); vTaskResume( xCreatedTasks[ evtMEDIUM_PRIORITY_INDEX ] ); prvCheckTaskCounters( evtMEDIUM_PRIORITY_INDEX, 1 ); vTaskResume( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_1 ] ); prvCheckTaskCounters( evtHIGHEST_PRIORITY_INDEX_1, 1 ); /* Now a slight change, first suspend all tasks. */ vTaskSuspend( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_1 ] ); vTaskSuspend( xCreatedTasks[ evtMEDIUM_PRIORITY_INDEX ] ); vTaskSuspend( xCreatedTasks[ evtLOWEST_PRIORITY_INDEX ] ); /* Now when we resume the low priority task and write to the queue 3 times. We expect the low priority task to service the queue three times. */ vTaskResume( xCreatedTasks[ evtLOWEST_PRIORITY_INDEX ] ); prvCheckTaskCounters( evtLOWEST_PRIORITY_INDEX, evtQUEUE_LENGTH ); /* Again suspend all tasks (only the low priority task is not suspended already). */ vTaskSuspend( xCreatedTasks[ evtLOWEST_PRIORITY_INDEX ] ); /* This time we are going to suspend the scheduler, resume the low priority task, then resume the high priority task. In this state we will write to the queue three times. When the scheduler is resumed we expect the high priority task to service all three messages. */ vTaskSuspendAll(); { vTaskResume( xCreatedTasks[ evtLOWEST_PRIORITY_INDEX ] ); vTaskResume( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_1 ] ); for( xDummy = 0; xDummy < evtQUEUE_LENGTH; xDummy++ ) { if( xQueueSend( xQueue, &xDummy, evtNO_DELAY ) != pdTRUE ) { xHealthStatus = pdFAIL; } } /* The queue should not have been serviced yet!. The scheduler is still suspended. */ if( memcmp( ( void * ) xExpectedTaskCounters, ( void * ) xTaskCounters, sizeof( xExpectedTaskCounters ) ) ) { xHealthStatus = pdFAIL; } } xTaskResumeAll(); /* We should have been preempted by resuming the scheduler - so by the time we are running again we expect the high priority task to have removed three items from the queue. */ xExpectedTaskCounters[ evtHIGHEST_PRIORITY_INDEX_1 ] += evtQUEUE_LENGTH; if( memcmp( ( void * ) xExpectedTaskCounters, ( void * ) xTaskCounters, sizeof( xExpectedTaskCounters ) ) ) { xHealthStatus = pdFAIL; } /* The medium priority and second high priority tasks are still suspended. Make sure to resume them before starting again. */ vTaskResume( xCreatedTasks[ evtMEDIUM_PRIORITY_INDEX ] ); vTaskResume( xCreatedTasks[ evtHIGHEST_PRIORITY_INDEX_2 ] ); /* Just keep incrementing to show the task is still executing. */ xCheckVariable++; } } /*-----------------------------------------------------------*/ static void prvCheckTaskCounters( portBASE_TYPE xExpectedTask, portBASE_TYPE xIncrement ) { portBASE_TYPE xDummy = 0; /* Write to the queue the requested number of times. The data written is not important. */ for( xDummy = 0; xDummy < xIncrement; xDummy++ ) { if( xQueueSend( xQueue, &xDummy, evtNO_DELAY ) != pdTRUE ) { /* Did not expect to ever find the queue full. */ xHealthStatus = pdFAIL; } } /* All the tasks blocked on the queue have a priority higher than the controlling task. Writing to the queue will therefore have caused this task to be preempted. By the time this line executes the event task will have executed and incremented its counter. Increment the expected counter to the same value. */ ( xExpectedTaskCounters[ xExpectedTask ] ) += xIncrement; /* Check the actual counts and expected counts really are the same. */ if( memcmp( ( void * ) xExpectedTaskCounters, ( void * ) xTaskCounters, sizeof( xExpectedTaskCounters ) ) ) { /* The counters were not the same. This means a task we did not expect to unblock actually did unblock. */ xHealthStatus = pdFAIL; } } /*-----------------------------------------------------------*/ portBASE_TYPE xAreMultiEventTasksStillRunning( void ) { static portBASE_TYPE xPreviousCheckVariable = 0; /* Called externally to periodically check that this test is still operational. */ if( xPreviousCheckVariable == xCheckVariable ) { xHealthStatus = pdFAIL; } xPreviousCheckVariable = xCheckVariable; return xHealthStatus; }
Go to most recent revision | Compare with Previous | Blame | View Log