URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [Common/] [Minimal/] [crflash.c] - Rev 609
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /* * This demo application file demonstrates the use of queues to pass data * between co-routines. * * N represents the number of 'fixed delay' co-routines that are created and * is set during initialisation. * * N 'fixed delay' co-routines are created that just block for a fixed * period then post the number of an LED onto a queue. Each such co-routine * uses a different block period. A single 'flash' co-routine is also created * that blocks on the same queue, waiting for the number of the next LED it * should flash. Upon receiving a number it simply toggle the instructed LED * then blocks on the queue once more. In this manner each LED from LED 0 to * LED N-1 is caused to flash at a different rate. * * The 'fixed delay' co-routines are created with co-routine priority 0. The * flash co-routine is created with co-routine priority 1. This means that * the queue should never contain more than a single item. This is because * posting to the queue will unblock the 'flash' co-routine, and as this has * a priority greater than the tasks posting to the queue it is guaranteed to * have emptied the queue and blocked once again before the queue can contain * any more date. An error is indicated if an attempt to post data to the * queue fails - indicating that the queue is already full. * */ /* Scheduler includes. */ #include "FreeRTOS.h" #include "croutine.h" #include "queue.h" /* Demo application includes. */ #include "partest.h" #include "crflash.h" /* The queue should only need to be of length 1. See the description at the top of the file. */ #define crfQUEUE_LENGTH 1 #define crfFIXED_DELAY_PRIORITY 0 #define crfFLASH_PRIORITY 1 /* Only one flash co-routine is created so the index is not significant. */ #define crfFLASH_INDEX 0 /* Don't allow more than crfMAX_FLASH_TASKS 'fixed delay' co-routines to be created. */ #define crfMAX_FLASH_TASKS 8 /* We don't want to block when posting to the queue. */ #define crfPOSTING_BLOCK_TIME 0 /* * The 'fixed delay' co-routine as described at the top of the file. */ static void prvFixedDelayCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex ); /* * The 'flash' co-routine as described at the top of the file. */ static void prvFlashCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex ); /* The queue used to pass data between the 'fixed delay' co-routines and the 'flash' co-routine. */ static xQueueHandle xFlashQueue; /* This will be set to pdFALSE if we detect an error. */ static portBASE_TYPE xCoRoutineFlashStatus = pdPASS; /*-----------------------------------------------------------*/ /* * See the header file for details. */ void vStartFlashCoRoutines( unsigned portBASE_TYPE uxNumberToCreate ) { unsigned portBASE_TYPE uxIndex; if( uxNumberToCreate > crfMAX_FLASH_TASKS ) { uxNumberToCreate = crfMAX_FLASH_TASKS; } /* Create the queue used to pass data between the co-routines. */ xFlashQueue = xQueueCreate( crfQUEUE_LENGTH, sizeof( unsigned portBASE_TYPE ) ); if( xFlashQueue ) { /* Create uxNumberToCreate 'fixed delay' co-routines. */ for( uxIndex = 0; uxIndex < uxNumberToCreate; uxIndex++ ) { xCoRoutineCreate( prvFixedDelayCoRoutine, crfFIXED_DELAY_PRIORITY, uxIndex ); } /* Create the 'flash' co-routine. */ xCoRoutineCreate( prvFlashCoRoutine, crfFLASH_PRIORITY, crfFLASH_INDEX ); } } /*-----------------------------------------------------------*/ static void prvFixedDelayCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex ) { /* Even though this is a co-routine the xResult variable does not need to be static as we do not need it to maintain its state between blocks. */ signed portBASE_TYPE xResult; /* The uxIndex parameter of the co-routine function is used as an index into the xFlashRates array to obtain the delay period to use. */ static const portTickType xFlashRates[ crfMAX_FLASH_TASKS ] = { 150 / portTICK_RATE_MS, 200 / portTICK_RATE_MS, 250 / portTICK_RATE_MS, 300 / portTICK_RATE_MS, 350 / portTICK_RATE_MS, 400 / portTICK_RATE_MS, 450 / portTICK_RATE_MS, 500 / portTICK_RATE_MS }; /* Co-routines MUST start with a call to crSTART. */ crSTART( xHandle ); for( ;; ) { /* Post our uxIndex value onto the queue. This is used as the LED to flash. */ crQUEUE_SEND( xHandle, xFlashQueue, ( void * ) &uxIndex, crfPOSTING_BLOCK_TIME, &xResult ); if( xResult != pdPASS ) { /* For the reasons stated at the top of the file we should always find that we can post to the queue. If we could not then an error has occurred. */ xCoRoutineFlashStatus = pdFAIL; } crDELAY( xHandle, xFlashRates[ uxIndex ] ); } /* Co-routines MUST end with a call to crEND. */ crEND(); } /*-----------------------------------------------------------*/ static void prvFlashCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex ) { /* Even though this is a co-routine the variable do not need to be static as we do not need it to maintain their state between blocks. */ signed portBASE_TYPE xResult; unsigned portBASE_TYPE uxLEDToFlash; /* Co-routines MUST start with a call to crSTART. */ crSTART( xHandle ); ( void ) uxIndex; for( ;; ) { /* Block to wait for the number of the LED to flash. */ crQUEUE_RECEIVE( xHandle, xFlashQueue, &uxLEDToFlash, portMAX_DELAY, &xResult ); if( xResult != pdPASS ) { /* We would not expect to wake unless we received something. */ xCoRoutineFlashStatus = pdFAIL; } else { /* We received the number of an LED to flash - flash it! */ vParTestToggleLED( uxLEDToFlash ); } } /* Co-routines MUST end with a call to crEND. */ crEND(); } /*-----------------------------------------------------------*/ portBASE_TYPE xAreFlashCoRoutinesStillRunning( void ) { /* Return pdPASS or pdFAIL depending on whether an error has been detected or not. */ return xCoRoutineFlashStatus; }
Go to most recent revision | Compare with Previous | Blame | View Log