URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [Common/] [drivers/] [ST/] [STM32F10xFWLib/] [src/] [stm32f10x_adc.c] - Rev 610
Go to most recent revision | Compare with Previous | Blame | View Log
/******************** (C) COPYRIGHT 2007 STMicroelectronics ******************** * File Name : stm32f10x_adc.c * Author : MCD Application Team * Date First Issued : 09/29/2006 * Description : This file provides all the ADC firmware functions. ******************************************************************************** * History: * 04/02/2007: V0.2 * 02/05/2007: V0.1 * 09/29/2006: V0.01 ******************************************************************************** * THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. * AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE * CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING * INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. *******************************************************************************/ /* Includes ------------------------------------------------------------------*/ #include "stm32f10x_adc.h" #include "stm32f10x_rcc.h" /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* ADC ADON mask */ #define CR2_ADON_Set ((u32)0x00000001) #define CR2_ADON_Reset ((u32)0xFFFFFFFE) /* ADC DMA mask */ #define CR2_DMA_Set ((u16)0x0100) #define CR2_DMA_Reset ((u16)0xFEFF) /* ADC RSTCAL mask */ #define CR2_RSTCAL_Set ((u16)0x0008) /* ADC CAL mask */ #define CR2_CAL_Set ((u16)0x0004) /* ADC SWSTRT mask */ #define CR2_SWSTRT_Set ((u32)0x00400000) /* ADC DISCNUM mask */ #define CR1_DISCNUM_Reset ((u32)0xFFFF1FFF) /* ADC DISCEN mask */ #define CR1_DISCEN_Set ((u32)0x00000800) #define CR1_DISCEN_Reset ((u32)0xFFFFF7FF) /* ADC EXTTRIG mask */ #define CR2_EXTTRIG_Set ((u32)0x00100000) #define CR2_EXTTRIG_Reset ((u32)0xFFEFFFFF) /* ADC Software start mask */ #define CR2_EXTTRIG_SWSTRT_Set ((u32)0x00500000) #define CR2_EXTTRIG_SWSTRT_Reset ((u32)0xFFAFFFFF) /* ADC JAUTO mask */ #define CR1_JAUTO_Set ((u32)0x00000400) #define CR1_JAUTO_Reset ((u32)0xFFFFFBFF) /* ADC JDISCEN mask */ #define CR1_JDISCEN_Set ((u32)0x00001000) #define CR1_JDISCEN_Reset ((u32)0xFFFFEFFF) /* ADC JEXTSEL mask */ #define CR2_JEXTSEL_Reset ((u32)0xFFFF8FFF) /* ADC JEXTTRIG mask */ #define CR2_JEXTTRIG_Set ((u32)0x00008000) #define CR2_JEXTTRIG_Reset ((u32)0xFFFF7FFF) /* ADC JSWSTRT mask */ #define CR2_JSWSTRT_Set ((u32)0x00200000) /* ADC injected software start mask */ #define CR2_JEXTTRIG_JSWSTRT_Set ((u32)0x00208000) #define CR2_JEXTTRIG_JSWSTRT_Reset ((u32)0xFFDF7FFF) /* ADC AWDCH mask */ #define CR1_AWDCH_Reset ((u32)0xFFFFFFE0) /* ADC SQx mask */ #define SQR3_SQ_Set ((u8)0x1F) #define SQR2_SQ_Set ((u8)0x1F) #define SQR1_SQ_Set ((u8)0x1F) /* ADC JSQx mask */ #define JSQR_JSQ_Set ((u8)0x1F) /* ADC JL mask */ #define JSQR_JL_Reset ((u32)0xFFCFFFFF) /* ADC SMPx mask */ #define SMPR1_SMP_Set ((u8)0x07) #define SMPR2_SMP_Set ((u8)0x07) /* ADC Analog watchdog enable mode mask */ #define CR1_AWDMode_Reset ((u32)0xFF3FFDFF) /* ADC TSPD mask */ #define CR2_TSPD_Set ((u32)0x00800000) #define CR2_TSPD_Reset ((u32)0xFF7FFFFF) /* ADC JDRx registers= offset */ #define JDR_Offset ((u8)0x28) /* ADC registers Masks */ #define CR1_CLEAR_Mask ((u32)0xFFF0FEFF) #define CR2_CLEAR_Mask ((u32)0xFFF1F7FD) #define SQR1_CLEAR_Mask ((u32)0xFF0FFFFF) /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ /******************************************************************************* * Function Name : ADC_DeInit * Description : Deinitializes the ADCx peripheral registers to their default * reset values. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * Output : None * Return : None *******************************************************************************/ void ADC_DeInit(ADC_TypeDef* ADCx) { switch (*(u32*)&ADCx) { case ADC1_BASE: /* Enable ADC1 reset state */ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); /* Release ADC1 from reset state */ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); break; case ADC2_BASE: /* Enable ADC2 reset state */ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE); /* Release ADC2 from reset state */ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE); break; default: break; } } /******************************************************************************* * Function Name : ADC_Init * Description : Initializes the ADCx according to the specified parameters * in the ADC_InitStruct. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_InitStruct: pointer to a ADC_InitTypeDef structure that * contains the configuration information for the specified * ADC peripheral. * Output : None * Return : None ******************************************************************************/ void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) { u32 tmpreg1 = 0; u8 tmpreg2 = 0; /* Check the parameters */ assert(IS_ADC_MODE(ADC_InitStruct->ADC_Mode)); assert(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); assert(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); assert(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); assert(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); assert(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel)); /*---------------------------- ADCx CR1 Configuration -----------------*/ /* Get the ADCx CR1 value */ tmpreg1 = ADCx->CR1; /* Clear DUALMODE and SCAN bits */ tmpreg1 &= CR1_CLEAR_Mask; /* Configure ADCx: Dual mode and scan conversion mode */ /* Set DUALMODE bits according to ADC_Mode value */ /* Set SCAN bit according to ADC_ScanConvMode value */ tmpreg1 |= (u32)(ADC_InitStruct->ADC_Mode | ((u32)ADC_InitStruct->ADC_ScanConvMode << 8)); /* Write to ADCx CR1 */ ADCx->CR1 = tmpreg1; /*---------------------------- ADCx CR2 Configuration -----------------*/ /* Get the ADCx CR2 value */ tmpreg1 = ADCx->CR2; /* Clear CONT, ALIGN and EXTTRIG bits */ tmpreg1 &= CR2_CLEAR_Mask; /* Configure ADCx: external trigger event and continuous conversion mode */ /* Set ALIGN bit according to ADC_DataAlign value */ /* Set EXTTRIG bits according to ADC_ExternalTrigConv value */ /* Set CONT bit according to ADC_ContinuousConvMode value */ tmpreg1 |= (u32)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | ((u32)ADC_InitStruct->ADC_ContinuousConvMode << 1)); /* Write to ADCx CR2 */ ADCx->CR2 = tmpreg1; /*---------------------------- ADCx SQR1 Configuration -----------------*/ /* Get the ADCx SQR1 value */ tmpreg1 = ADCx->SQR1; /* Clear L bits */ tmpreg1 &= SQR1_CLEAR_Mask; /* Configure ADCx: regular channel sequence length */ /* Set L bits according to ADC_NbrOfChannel value */ tmpreg2 |= (ADC_InitStruct->ADC_NbrOfChannel - 1); tmpreg1 |= ((u32)tmpreg2 << 20); /* Write to ADCx SQR1 */ ADCx->SQR1 = tmpreg1; } /******************************************************************************* * Function Name : ADC_StructInit * Description : Fills each ADC_InitStruct member with its default value. * Input : ADC_InitStruct : pointer to a ADC_InitTypeDef structure * which will be initialized. * Output : None * Return : None *******************************************************************************/ void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) { /* Reset ADC init structure parameters values */ /* Initialize the ADC_Mode member */ ADC_InitStruct->ADC_Mode = ADC_Mode_Independent; /* initialize the ADC_ScanConvMode member */ ADC_InitStruct->ADC_ScanConvMode = DISABLE; /* Initialize the ADC_ContinuousConvMode member */ ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; /* Initialize the ADC_ExternalTrigConv member */ ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; /* Initialize the ADC_DataAlign member */ ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; /* Initialize the ADC_NbrOfChannel member */ ADC_InitStruct->ADC_NbrOfChannel = 1; } /******************************************************************************* * Function Name : ADC_Cmd * Description : Enables or disables the specified ADC peripheral. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - NewState: new state of the ADCx peripheral. This parameter * can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Set the ADON bit to wake up the ADC from power down mode */ ADCx->CR2 |= CR2_ADON_Set; } else { /* Disable the selected ADC peripheral */ ADCx->CR2 &= CR2_ADON_Reset; } } /******************************************************************************* * Function Name : ADC_DMACmd * Description : Enables or disables the specified ADC DMA request. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - NewState: new state of the selected ADC DMA transfer. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected ADC DMA request */ ADCx->CR2 |= CR2_DMA_Set; } else { /* Disable the selected ADC DMA request */ ADCx->CR2 &= CR2_DMA_Reset; } } /******************************************************************************* * Function Name : ADC_ITConfig * Description : Enables or disables the specified ADC interrupts. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_IT: specifies the ADC interrupts sources to be enabled * or disabled. * This parameter can be any combination of the following values: * - ADC_IT_EOC: End of conversion interrupt mask * - ADC_IT_AWD: Analog watchdog interrupt mask * - ADC_IT_JEOC: End of injected conversion interrupt mask * - NewState: new state of the specified ADC interrupts. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_ITConfig(ADC_TypeDef* ADCx, u16 ADC_IT, FunctionalState NewState) { u8 itmask = 0; /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); assert(IS_ADC_IT(ADC_IT)); /* Get the ADC IT index */ itmask = (u8)ADC_IT; if (NewState != DISABLE) { /* Enable the selected ADC interrupts */ ADCx->CR1 |= itmask; } else { /* Disable the selected ADC interrupts */ ADCx->CR1 &= (~(u32)itmask); } } /******************************************************************************* * Function Name : ADC_ResetCalibration * Description : Resets the ADC calibration registers. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * Output : None * Return : None *******************************************************************************/ void ADC_ResetCalibration(ADC_TypeDef* ADCx) { /* Resets the selected ADC calibartion registers */ ADCx->CR2 |= CR2_RSTCAL_Set; } /******************************************************************************* * Function Name : ADC_GetResetCalibrationStatus * Description : Gets the ADC reset calibration registers status. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * Output : None * Return : The new state of ADC Reset Calibration registers (SET or RESET). *******************************************************************************/ FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx) { FlagStatus bitstatus = RESET; /* Check the status of RSTCAL bit */ if ((ADCx->CR2 & CR2_RSTCAL_Set) != (u16)RESET) { /* RSTCAL bit is set */ bitstatus = SET; } else { /* RSTCAL bit is reset */ bitstatus = RESET; } /* Return the RSTCAL bit status */ return bitstatus; } /******************************************************************************* * Function Name : ADC_StartCalibration * Description : Starts the calibration process. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * Output : None * Return : None *******************************************************************************/ void ADC_StartCalibration(ADC_TypeDef* ADCx) { /* Enable the selected ADC calibration process */ ADCx->CR2 |= CR2_CAL_Set; } /******************************************************************************* * Function Name : ADC_GetCalibrationStatus * Description : Gets the ADC calibration status. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * Output : None * Return : The new state of ADC calibration (SET or RESET). *******************************************************************************/ FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx) { FlagStatus bitstatus = RESET; /* Check the status of CAL bit */ if ((ADCx->CR2 & CR2_CAL_Set) != (u16)RESET) { /* CAL bit is set: calibration on going */ bitstatus = SET; } else { /* CAL bit is reset: end of calibration */ bitstatus = RESET; } /* Return the CAL bit status */ return bitstatus; } /******************************************************************************* * Function Name : ADC_SoftwareStartConvCmd * Description : Enables or disables the ADC software start conversion . * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - NewState: new state of the selected ADC software start conversion. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected ADC conversion on external event */ /* Starts the selected ADC conversion */ ADCx->CR2 |= CR2_EXTTRIG_SWSTRT_Set; } else { /* Stops the selected ADC conversion */ /* Disable the selected ADC conversion on external event */ ADCx->CR2 &= CR2_EXTTRIG_SWSTRT_Reset; } } /******************************************************************************* * Function Name : ADC_GetSoftwareStartConvStatus * Description : Gets the ADC Software start conversion Status. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * Output : None * Return : The new state of ADC software start conversion (SET or RESET). *******************************************************************************/ FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) { FlagStatus bitstatus = RESET; /* Check the status of SWSTRT bit */ if ((ADCx->CR2 & CR2_SWSTRT_Set) != (u32)RESET) { /* SWSTRT bit is set */ bitstatus = SET; } else { /* SWSTRT bit is reset */ bitstatus = RESET; } /* Return the SWSTRT bit status */ return bitstatus; } /******************************************************************************* * Function Name : ADC_DiscModeChannelCountConfig * Description : Configures the discontinuous mode for the selected ADC regular * group channel. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - Number: specifies the discontinuous mode regular channel * count value. This mumber must be between 1 and 8. * Output : None * Return : None *******************************************************************************/ void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, u8 Number) { u32 tmpreg1 = 0; u8 tmpreg2 = 0; /* Check the parameters */ assert(IS_ADC_REGULAR_DISC_NUMBER(Number)); /* Get the old register value */ tmpreg1 = ADCx->CR1; /* Clear the old discontinuous mode channel count */ tmpreg1 &= CR1_DISCNUM_Reset; /* Set the discontinuous mode channel count */ tmpreg2 = Number - 1; tmpreg1 |= ((u32)tmpreg2 << 13); /* Store the new register value */ ADCx->CR1 = tmpreg1; } /******************************************************************************* * Function Name : ADC_DiscModeCmd * Description : Enables or disables the discontinuous mode on regular group * channel for the specified ADC * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - NewState: new state of the selected ADC discontinuous mode * on regular group channel. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected ADC regular discontinuous mode */ ADCx->CR1 |= CR1_DISCEN_Set; } else { /* Disable the selected ADC regular discontinuous mode */ ADCx->CR1 &= CR1_DISCEN_Reset; } } /******************************************************************************* * Function Name : ADC_RegularChannelConfig * Description : Configures for the selected ADC regular channel its corresponding * rank in the sequencer and its sample time. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_Channel: the ADC channel to configure. * This parameter can be one of the following values: * - ADC_Channel_0: ADC Channel0 selected * - ADC_Channel_1: ADC Channel1 selected * - ADC_Channel_2: ADC Channel2 selected * - ADC_Channel_3: ADC Channel3 selected * - ADC_Channel_4: ADC Channel4 selected * - ADC_Channel_5: ADC Channel5 selected * - ADC_Channel_6: ADC Channel6 selected * - ADC_Channel_7: ADC Channel7 selected * - ADC_Channel_8: ADC Channel8 selected * - ADC_Channel_9: ADC Channel9 selected * - ADC_Channel_10: ADC Channel10 selected * - ADC_Channel_11: ADC Channel11 selected * - ADC_Channel_12: ADC Channel12 selected * - ADC_Channel_13: ADC Channel13 selected * - ADC_Channel_14: ADC Channel14 selected * - ADC_Channel_15: ADC Channel15 selected * - ADC_Channel_16: ADC Channel16 selected * - ADC_Channel_17: ADC Channel17 selected * - Rank: The rank in the regular group sequencer. This parameter * must be between 1 to 16. * - ADC_SampleTime: The sample time value to be set for the * selected channel. * This parameter can be one of the following values: * - ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles * - ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles * - ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles * - ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles * - ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles * - ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles * - ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles * - ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles * Output : None * Return : None *******************************************************************************/ void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime) { u32 tmpreg1 = 0, tmpreg2 = 0; /* Check the parameters */ assert(IS_ADC_CHANNEL(ADC_Channel)); assert(IS_ADC_REGULAR_RANK(Rank)); assert(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ if (ADC_Channel > ADC_Channel_9) { /* Get the old register value */ tmpreg1 = ADCx->SMPR1; /* Calculate the mask to clear */ tmpreg2 = (u32)SMPR1_SMP_Set << (3 * (ADC_Channel - 10)); /* Clear the old discontinuous mode channel count */ tmpreg1 &= ~tmpreg2; /* Calculate the mask to set */ tmpreg2 = (u32)ADC_SampleTime << (3 * (ADC_Channel - 10)); /* Set the discontinuous mode channel count */ tmpreg1 |= tmpreg2; /* Store the new register value */ ADCx->SMPR1 = tmpreg1; } else /* ADC_Channel include in ADC_Channel_[0..9] */ { /* Get the old register value */ tmpreg1 = ADCx->SMPR2; /* Calculate the mask to clear */ tmpreg2 = (u32)SMPR2_SMP_Set << (3 * ADC_Channel); /* Clear the old discontinuous mode channel count */ tmpreg1 &= ~tmpreg2; /* Calculate the mask to set */ tmpreg2 = (u32)ADC_SampleTime << (3 * ADC_Channel); /* Set the discontinuous mode channel count */ tmpreg1 |= tmpreg2; /* Store the new register value */ ADCx->SMPR2 = tmpreg1; } /* For Rank 1 to 6 */ if (Rank < 7) { /* Get the old register value */ tmpreg1 = ADCx->SQR3; /* Calculate the mask to clear */ tmpreg2 = (u32)SQR3_SQ_Set << (5 * (Rank - 1)); /* Clear the old SQx bits for the selected rank */ tmpreg1 &= ~tmpreg2; /* Calculate the mask to set */ tmpreg2 = (u32)ADC_Channel << (5 * (Rank - 1)); /* Set the SQx bits for the selected rank */ tmpreg1 |= tmpreg2; /* Store the new register value */ ADCx->SQR3 = tmpreg1; } /* For Rank 7 to 12 */ else if (Rank < 13) { /* Get the old register value */ tmpreg1 = ADCx->SQR2; /* Calculate the mask to clear */ tmpreg2 = (u32)SQR2_SQ_Set << (5 * (Rank - 7)); /* Clear the old SQx bits for the selected rank */ tmpreg1 &= ~tmpreg2; /* Calculate the mask to set */ tmpreg2 = (u32)ADC_Channel << (5 * (Rank - 7)); /* Set the SQx bits for the selected rank */ tmpreg1 |= tmpreg2; /* Store the new register value */ ADCx->SQR2 = tmpreg1; } /* For Rank 13 to 16 */ else { /* Get the old register value */ tmpreg1 = ADCx->SQR1; /* Calculate the mask to clear */ tmpreg2 = (u32)SQR1_SQ_Set << (5 * (Rank - 13)); /* Clear the old SQx bits for the selected rank */ tmpreg1 &= ~tmpreg2; /* Calculate the mask to set */ tmpreg2 = (u32)ADC_Channel << (5 * (Rank - 13)); /* Set the SQx bits for the selected rank */ tmpreg1 |= tmpreg2; /* Store the new register value */ ADCx->SQR1 = tmpreg1; } } /******************************************************************************* * Function Name : ADC_ExternalTrigConvCmd * Description : Enables or disables the ADCx conversion through external trigger. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - NewState: new state of the selected ADC external trigger * start of conversion. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected ADC conversion on external event */ ADCx->CR2 |= CR2_EXTTRIG_Set; } else { /* Disable the selected ADC conversion on external event */ ADCx->CR2 &= CR2_EXTTRIG_Reset; } } /******************************************************************************* * Function Name : ADC_GetConversionValue * Description : Returns the last ADC conversion result data for regular channel. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * Output : None * Return : The Data conversion value. *******************************************************************************/ u16 ADC_GetConversionValue(ADC_TypeDef* ADCx) { /* Return the selected ADC conversion value */ return (u16) ADCx->DR; } /******************************************************************************* * Function Name : ADC_GetDualModeConversionValue * Description : Returns the last ADCs conversion result data in dual mode. * Output : None * Return : The Data conversion value. *******************************************************************************/ u32 ADC_GetDualModeConversionValue(void) { /* Return the dual mode conversion value */ return ADC1->DR; } /******************************************************************************* * Function Name : ADC_AutoInjectedConvCmd * Description : Enables or disables the automatic injected group conversion * after regular one. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - NewState: new state of the selected ADC auto injected * conversion * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected ADC automatic injected group conversion */ ADCx->CR1 |= CR1_JAUTO_Set; } else { /* Disable the selected ADC automatic injected group conversion */ ADCx->CR1 &= CR1_JAUTO_Reset; } } /******************************************************************************* * Function Name : ADC_InjectedDiscModeCmd * Description : Enables or disables the discontinuous mode for injected group * channel for the specified ADC * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - NewState: new state of the selected ADC discontinuous mode * on injected group channel. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected ADC injected discontinuous mode */ ADCx->CR1 |= CR1_JDISCEN_Set; } else { /* Disable the selected ADC injected discontinuous mode */ ADCx->CR1 &= CR1_JDISCEN_Reset; } } /******************************************************************************* * Function Name : ADC_ExternalTrigInjectedConvConfig * Description : Configures the external trigger for injected channels conversion. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_ExternalTrigInjecConv: specifies the ADC trigger to * start injected conversion. * This parameter can be one of the following values: * - ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event * selected * - ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture * compare4 selected * - ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event * selected * - ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture * compare1 selected * - ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture * compare4 selected * - ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event * selected * - ADC_ExternalTrigInjecConv_Ext_Interrupt15: External * interrupt 15 event selected * - ADC_ExternalTrigInjecConv_None: Injected conversion * started by software and not by external trigger * Output : None * Return : None *******************************************************************************/ void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, u32 ADC_ExternalTrigInjecConv) { u32 tmpreg = 0; /* Check the parameters */ assert(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); /* Get the old register value */ tmpreg = ADCx->CR2; /* Clear the old external event selection for injected group */ tmpreg &= CR2_JEXTSEL_Reset; /* Set the external event selection for injected group */ tmpreg |= ADC_ExternalTrigInjecConv; /* Store the new register value */ ADCx->CR2 = tmpreg; } /******************************************************************************* * Function Name : ADC_ExternalTrigInjectedConvCmd * Description : Enables or disables the ADCx injected channels conversion * through external trigger * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - NewState: new state of the selected ADC external trigger * start of injected conversion. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected ADC external event selection for injected group */ ADCx->CR2 |= CR2_JEXTTRIG_Set; } else { /* Disable the selected ADC external event selection for injected group */ ADCx->CR2 &= CR2_JEXTTRIG_Reset; } } /******************************************************************************* * Function Name : ADC_SoftwareStartInjectedConvCmd * Description : Enables or disables the start of the injected channels conversion. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - NewState: new state of the selected ADC software start * injected conversion. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected ADC external event selection for injected group */ /* Starts the selected ADC injected conversion */ ADCx->CR2 |= CR2_JEXTTRIG_JSWSTRT_Set; } else { /* Stops the selected ADC injected conversion */ /* Disable the selected ADC external event selection for injected group */ ADCx->CR2 &= CR2_JEXTTRIG_JSWSTRT_Reset; } } /******************************************************************************* * Function Name : ADC_GetSoftwareStartInjectedConvCmdStatus * Description : Gets the ADC Software start injected conversion Status. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * Output : None * Return : The new state of ADC software start injected conversion (SET or RESET). *******************************************************************************/ FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) { FlagStatus bitstatus = RESET; /* Check the status of JSWSTRT bit */ if ((ADCx->CR2 & CR2_JSWSTRT_Set) != (u32)RESET) { /* JSWSTRT bit is set */ bitstatus = SET; } else { /* JSWSTRT bit is reset */ bitstatus = RESET; } /* Return the JSWSTRT bit status */ return bitstatus; } /******************************************************************************* * Function Name : ADC_InjectedChannelConfig * Description : Configures for the selected ADC injected channel its corresponding * rank in the sequencer and its sample time. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_Channel: the ADC channel to configure. * This parameter can be one of the following values: * - ADC_Channel_0: ADC Channel0 selected * - ADC_Channel_1: ADC Channel1 selected * - ADC_Channel_2: ADC Channel2 selected * - ADC_Channel_3: ADC Channel3 selected * - ADC_Channel_4: ADC Channel4 selected * - ADC_Channel_5: ADC Channel5 selected * - ADC_Channel_6: ADC Channel6 selected * - ADC_Channel_7: ADC Channel7 selected * - ADC_Channel_8: ADC Channel8 selected * - ADC_Channel_9: ADC Channel9 selected * - ADC_Channel_10: ADC Channel10 selected * - ADC_Channel_11: ADC Channel11 selected * - ADC_Channel_12: ADC Channel12 selected * - ADC_Channel_13: ADC Channel13 selected * - ADC_Channel_14: ADC Channel14 selected * - ADC_Channel_15: ADC Channel15 selected * - ADC_Channel_16: ADC Channel16 selected * - ADC_Channel_17: ADC Channel17 selected * - Rank: The rank in the injected group sequencer. This parameter * must be between 1 to 4. * - ADC_SampleTime: The sample time value to be set for the * selected channel. * This parameter can be one of the following values: * - ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles * - ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles * - ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles * - ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles * - ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles * - ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles * - ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles * - ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles * Output : None * Return : None *******************************************************************************/ void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime) { u32 tmpreg1 = 0, tmpreg2 = 0; u8 tmpreg3 = 0; /* Check the parameters */ assert(IS_ADC_CHANNEL(ADC_Channel)); assert(IS_ADC_INJECTED_RANK(Rank)); assert(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ if (ADC_Channel > ADC_Channel_9) { /* Get the old register value */ tmpreg1 = ADCx->SMPR1; /* Calculate the mask to clear */ tmpreg2 = (u32)SMPR1_SMP_Set << (3*(ADC_Channel - 10)); /* Clear the old discontinuous mode channel count */ tmpreg1 &= ~tmpreg2; /* Calculate the mask to set */ tmpreg2 = (u32)ADC_SampleTime << (3*(ADC_Channel - 10)); /* Set the discontinuous mode channel count */ tmpreg1 |= tmpreg2; /* Store the new register value */ ADCx->SMPR1 = tmpreg1; } else /* ADC_Channel include in ADC_Channel_[0..9] */ { /* Get the old register value */ tmpreg1 = ADCx->SMPR2; /* Calculate the mask to clear */ tmpreg2 = (u32)SMPR2_SMP_Set << (3 * ADC_Channel); /* Clear the old discontinuous mode channel count */ tmpreg1 &= ~tmpreg2; /* Calculate the mask to set */ tmpreg2 = (u32)ADC_SampleTime << (3 * ADC_Channel); /* Set the discontinuous mode channel count */ tmpreg1 |= tmpreg2; /* Store the new register value */ ADCx->SMPR2 = tmpreg1; } /* Rank configuration */ /* Get the old register value */ tmpreg1 = ADCx->JSQR; /* Get JL value: Number = JL+1 */ tmpreg3 = (u8)((tmpreg1 & (u32)~JSQR_JL_Reset)>> 20); /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ tmpreg2 = (u32)JSQR_JSQ_Set << (5 * ((Rank + 3) - (tmpreg3 + 1))); /* Clear the old JSQx bits for the selected rank */ tmpreg1 &= ~tmpreg2; /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ tmpreg2 = (u32)ADC_Channel << (5 * ((Rank + 3) - (tmpreg3 + 1))); /* Set the JSQx bits for the selected rank */ tmpreg1 |= tmpreg2; /* Store the new register value */ ADCx->JSQR = tmpreg1; } /******************************************************************************* * Function Name : ADC_InjectedSequencerLengthConfig * Description : Configures the sequencer for injected channels * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - Length: The sequencer length. * This parameter must be a number between 1 to 4. * Output : None * Return : None *******************************************************************************/ void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, u8 Length) { u32 tmpreg1 = 0; u8 tmpreg2 = 0; /* Check the parameters */ assert(IS_ADC_INJECTED_LENGTH(Length)); /* Get the old register value */ tmpreg1 = ADCx->JSQR; /* Clear the old injected sequnence lenght JL bits */ tmpreg1 &= JSQR_JL_Reset; /* Set the injected sequnence lenght JL bits */ tmpreg2 = Length - 1; tmpreg1 |= (u32)tmpreg2 << 20; /* Store the new register value */ ADCx->JSQR = tmpreg1; } /******************************************************************************* * Function Name : ADC_SetInjectedOffset * Description : Set the injected channels conversion value offset * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_InjectedChannel: the ADC injected channel to set its * offset. * This parameter can be one of the following values: * - ADC_InjectedChannel_1: Injected Channel1 selected * - ADC_InjectedChannel_2: Injected Channel2 selected * - ADC_InjectedChannel_3: Injected Channel3 selected * - ADC_InjectedChannel_4: Injected Channel4 selected * Output : None * Return : None *******************************************************************************/ void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel, u16 Offset) { /* Check the parameters */ assert(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); assert(IS_ADC_OFFSET(Offset)); /* Set the selected injected channel data offset */ *((u32 *)((*(u32*)&ADCx) + ADC_InjectedChannel)) = (u32)Offset; } /******************************************************************************* * Function Name : ADC_GetInjectedConversionValue * Description : Returns the ADC conversion result data for the selected * injected channel * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_InjectedChannel: the converted ADC injected channel. * This parameter can be one of the following values: * - ADC_InjectedChannel_1: Injected Channel1 selected * - ADC_InjectedChannel_2: Injected Channel2 selected * - ADC_InjectedChannel_3: Injected Channel3 selected * - ADC_InjectedChannel_4: Injected Channel4 selected * Output : None * Return : The Data conversion value. *******************************************************************************/ u16 ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel) { /* Check the parameters */ assert(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); /* Returns the selected injected channel conversion data value */ return (u16) (*(u32*) (((*(u32*)&ADCx) + ADC_InjectedChannel + JDR_Offset))); } /******************************************************************************* * Function Name : ADC_AnalogWatchdogCmd * Description : Enables or disables the analog watchdog on single/all regular * or injected channels * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_AnalogWatchdog: the ADC analog watchdog configuration. * This parameter can be one of the following values: * - ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on * a single regular channel * - ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on * a single injected channel * - ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog * watchdog on a single regular or injected channel * - ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on * all regular channel * - ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on * all injected channel * - ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog * on all regular and injected channels * - ADC_AnalogWatchdog_None: No channel guarded by the * analog watchdog * Output : None * Return : None *******************************************************************************/ void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, u32 ADC_AnalogWatchdog) { u32 tmpreg = 0; /* Check the parameters */ assert(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); /* Get the old register value */ tmpreg = ADCx->CR1; /* Clear AWDEN, AWDENJ and AWDSGL bits */ tmpreg &= CR1_AWDMode_Reset; /* Set the analog watchdog enable mode */ tmpreg |= ADC_AnalogWatchdog; /* Store the new register value */ ADCx->CR1 = tmpreg; } /******************************************************************************* * Function Name : ADC_AnalogWatchdogThresholdsConfig * Description : Configures the High and low thresholds of the analog watchdog. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - HighThreshold: the ADC analog watchdog High threshold value. * This parameter must be a 12bit value. * - LowThreshold: the ADC analog watchdog Low threshold value. * This parameter must be a 12bit value. * Output : None * Return : None *******************************************************************************/ void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, u16 HighThreshold, u16 LowThreshold) { /* Check the parameters */ assert(IS_ADC_THRESHOLD(HighThreshold)); assert(IS_ADC_THRESHOLD(LowThreshold)); /* Set the ADCx high threshold */ ADCx->HTR = HighThreshold; /* Set the ADCx low threshold */ ADCx->LTR = LowThreshold; } /******************************************************************************* * Function Name : ADC_AnalogWatchdogSingleChannelConfig * Description : Configures the analog watchdog guarded single channel * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_Channel: the ADC channel to configure for the analog * watchdog. * This parameter can be one of the following values: * - ADC_Channel_0: ADC Channel0 selected * - ADC_Channel_1: ADC Channel1 selected * - ADC_Channel_2: ADC Channel2 selected * - ADC_Channel_3: ADC Channel3 selected * - ADC_Channel_4: ADC Channel4 selected * - ADC_Channel_5: ADC Channel5 selected * - ADC_Channel_6: ADC Channel6 selected * - ADC_Channel_7: ADC Channel7 selected * - ADC_Channel_8: ADC Channel8 selected * - ADC_Channel_9: ADC Channel9 selected * - ADC_Channel_10: ADC Channel10 selected * - ADC_Channel_11: ADC Channel11 selected * - ADC_Channel_12: ADC Channel12 selected * - ADC_Channel_13: ADC Channel13 selected * - ADC_Channel_14: ADC Channel14 selected * - ADC_Channel_15: ADC Channel15 selected * - ADC_Channel_16: ADC Channel16 selected * - ADC_Channel_17: ADC Channel17 selected * Output : None * Return : None *******************************************************************************/ void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel) { u32 tmpreg = 0; /* Check the parameters */ assert(IS_ADC_CHANNEL(ADC_Channel)); /* Get the old register value */ tmpreg = ADCx->CR1; /* Clear the Analog watchdog channel select bits */ tmpreg &= CR1_AWDCH_Reset; /* Set the Analog watchdog channel */ tmpreg |= ADC_Channel; /* Store the new register value */ ADCx->CR1 = tmpreg; } /******************************************************************************* * Function Name : ADC_TempSensorCmd * Description : Enables or disables the temperature sensor. * Input : - NewState: new state of the temperature sensor. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void ADC_TempSensorCmd(FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the temperature sensor */ ADC1->CR2 |= CR2_TSPD_Set; } else { /* Disable the temperature sensor */ ADC1->CR2 &= CR2_TSPD_Reset; } } /******************************************************************************* * Function Name : ADC_GetFlagStatus * Description : Checks whether the specified ADC flag is set or not. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_FLAG: specifies the flag to check. * This parameter can be one of the following values: * - ADC_FLAG_AWD: Analog watchdog flag * - ADC_FLAG_EOC: End of conversion flag * - ADC_FLAG_JEOC: End of injected group conversion flag * - ADC_FLAG_JSTRT: Start of injected group conversion flag * - ADC_FLAG_STRT: Start of regular group conversion flag * Output : None * Return : The new state of ADC_FLAG (SET or RESET). *******************************************************************************/ FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, u8 ADC_FLAG) { FlagStatus bitstatus = RESET; /* Check the parameters */ assert(IS_ADC_GET_FLAG(ADC_FLAG)); /* Check the status of the specified ADC flag */ if ((ADCx->SR & ADC_FLAG) != (u8)RESET) { /* ADC_FLAG is set */ bitstatus = SET; } else { /* ADC_FLAG is reset */ bitstatus = RESET; } /* Return the ADC_FLAG status */ return bitstatus; } /******************************************************************************* * Function Name : ADC_ClearFlag * Description : Clears the ADCx's pending flags. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_FLAG: specifies the flag to clear. * This parameter can be any combination of the following values: * - ADC_FLAG_AWD: Analog watchdog flag * - ADC_FLAG_EOC: End of conversion flag * - ADC_FLAG_JEOC: End of injected group conversion flag * - ADC_FLAG_JSTRT: Start of injected group conversion flag * - ADC_FLAG_STRT: Start of regular group conversion flag * Output : None * Return : None *******************************************************************************/ void ADC_ClearFlag(ADC_TypeDef* ADCx, u8 ADC_FLAG) { /* Check the parameters */ assert(IS_ADC_CLEAR_FLAG(ADC_FLAG)); /* Clear the selected ADC flags */ ADCx->SR &= ~(u32)ADC_FLAG; } /******************************************************************************* * Function Name : ADC_GetITStatus * Description : Checks whether the specified ADC interrupt has occurred or not. * Input : - ADCx: where x can be 1 or 2 to select the ADC peripheral. * - ADC_IT: specifies the ADC interrupt source to check. * This parameter can be one of the following values: * - ADC_IT_EOC: End of conversion interrupt mask * - ADC_IT_AWD: Analog watchdog interrupt mask * - ADC_IT_JEOC: End of injected conversion interrupt mask * Output : None * Return : The new state of ADC_IT (SET or RESET). *******************************************************************************/ ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, u16 ADC_IT) { ITStatus bitstatus = RESET; u8 itmask = 0, enablestatus; /* Check the parameters */ assert(IS_ADC_GET_IT(ADC_IT)); /* Get the ADC IT index */ itmask = (u8)(ADC_IT >> 8); /* Get the ADC_IT enable bit status */ enablestatus = (ADCx->CR1 & (u8)ADC_IT) ; /* Check the status of the specified ADC interrupt */ if (((ADCx->SR & itmask) != (u8)RESET) && enablestatus) { /* ADC_IT is set */ bitstatus = SET; } else { /* ADC_IT is reset */ bitstatus = RESET; } /* Return the ADC_IT status */ return bitstatus; } /******************************************************************************* * Function Name : ADC_ClearITPendingBit * Description : Clears the ADC’s interrupt pending bits. * Input : - ADC_IT: specifies the ADC interrupt pending bit to clear. * This parameter can be any combination of the following values: * - ADC_IT_EOC: End of conversion interrupt mask * - ADC_IT_AWD: Analog watchdog interrupt mask * - ADC_IT_JEOC: End of injected conversion interrupt mask * Output : None * Return : None *******************************************************************************/ void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, u16 ADC_IT) { u8 itmask = 0; /* Check the parameters */ assert(IS_ADC_IT(ADC_IT)); /* Get the ADC IT index */ itmask = (u8)(ADC_IT >> 8); /* Clear the selected ADC interrupt pending bits */ ADCx->SR &= ~(u32)itmask; } /******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/
Go to most recent revision | Compare with Previous | Blame | View Log