Subversion Repositories openrisc_2011-10-31

/**
  ******************************************************************************
  * @file  stm32f10x_dac.c
  * @author  MCD Application Team
  * @version  V3.0.0
  * @date  04/06/2009
  * @brief  This file provides all the DAC firmware functions.
  ******************************************************************************
  * @copy
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
  */ 
 
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_dac.h"
#include "stm32f10x_rcc.h"
 
/** @addtogroup StdPeriph_Driver
  * @{
  */
 
/** @defgroup DAC 
  * @brief DAC driver modules
  * @{
  */ 
 
/** @defgroup DAC_Private_TypesDefinitions
  * @{
  */
 
/**
  * @}
  */
 
/** @defgroup DAC_Private_Defines
  * @{
  */
 
/* DAC EN mask */
#define CR_EN_Set                  ((uint32_t)0x00000001)
 
/* DAC DMAEN mask */
#define CR_DMAEN_Set               ((uint32_t)0x00001000)
 
/* CR register Mask */
#define CR_CLEAR_Mask              ((uint32_t)0x00000FFE)
 
/* DAC SWTRIG mask */
#define SWTRIGR_SWTRIG_Set         ((uint32_t)0x00000001)
 
/* DAC Dual Channels SWTRIG masks */
#define DUAL_SWTRIG_Set            ((uint32_t)0x00000003)
#define DUAL_SWTRIG_Reset          ((uint32_t)0xFFFFFFFC)
 
/* DHR registers offsets */
#define DHR12R1_Offset             ((uint32_t)0x00000008)
#define DHR12R2_Offset             ((uint32_t)0x00000014)
#define DHR12RD_Offset             ((uint32_t)0x00000020)
 
/* DOR register offset */
#define DOR_Offset                 ((uint32_t)0x0000002C)
/**
  * @}
  */
 
/** @defgroup DAC_Private_Macros
  * @{
  */
 
/**
  * @}
  */
 
/** @defgroup DAC_Private_Variables
  * @{
  */
 
/**
  * @}
  */
 
/** @defgroup DAC_Private_FunctionPrototypes
  * @{
  */
 
/**
  * @}
  */
 
/** @defgroup DAC_Private_Functions
  * @{
  */
 
/**
  * @brief  Deinitializes the DAC peripheral registers to their default
  *   reset values.
  * @param  None
  * @retval : None
  */
void DAC_DeInit(void)
{
  /* Enable DAC reset state */
  RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
  /* Release DAC from reset state */
  RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
}
 
/**
  * @brief  Initializes the DAC peripheral according to the specified 
  *   parameters in the DAC_InitStruct.
  * @param DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  * @arg DAC_Channel_1: DAC Channel1 selected
  * @arg DAC_Channel_2: DAC Channel2 selected
  * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
  *   contains the configuration information for the specified
  *   DAC channel.
  * @retval : None
  */
void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
{
  uint32_t tmpreg1 = 0, tmpreg2 = 0;
  /* Check the DAC parameters */
  assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
  assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
  assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
  assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
/*---------------------------- DAC CR Configuration --------------------------*/
  /* Get the DAC CR value */
  tmpreg1 = DAC->CR;
  /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
  tmpreg1 &= ~(CR_CLEAR_Mask << DAC_Channel);
  /* Configure for the selected DAC channel: buffer output, trigger, wave genration,
     mask/amplitude for wave genration */
  /* Set TSELx and TENx bits according to DAC_Trigger value */
  /* Set WAVEx bits according to DAC_WaveGeneration value */
  /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ 
  /* Set BOFFx bit according to DAC_OutputBuffer value */   
  tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
             DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
  /* Calculate CR register value depending on DAC_Channel */
  tmpreg1 |= tmpreg2 << DAC_Channel;
  /* Write to DAC CR */
  DAC->CR = tmpreg1;
}
 
/**
  * @brief  Fills each DAC_InitStruct member with its default value.
  * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure
  *   which will be initialized.
  * @retval : None
  */
void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
{
/*--------------- Reset DAC init structure parameters values -----------------*/
  /* Initialize the DAC_Trigger member */
  DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
  /* Initialize the DAC_WaveGeneration member */
  DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
  /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
  DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
  /* Initialize the DAC_OutputBuffer member */
  DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
}
 
/**
  * @brief  Enables or disables the specified DAC channel.
  * @param DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  * @arg DAC_Channel_1: DAC Channel1 selected
  * @arg DAC_Channel_2: DAC Channel2 selected
  * @param NewState: new state of the DAC channel. 
  *   This parameter can be: ENABLE or DISABLE.
  * @retval : None
  */
void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_DAC_CHANNEL(DAC_Channel));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {
    /* Enable the selected DAC channel */
    DAC->CR |= CR_EN_Set << DAC_Channel;
  }
  else
  {
    /* Disable the selected DAC channel */
    DAC->CR &= ~(CR_EN_Set << DAC_Channel);
  }
}
 
/**
  * @brief  Enables or disables the specified DAC channel DMA request.
  * @param DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  * @arg DAC_Channel_1: DAC Channel1 selected
  * @arg DAC_Channel_2: DAC Channel2 selected
  * @param NewState: new state of the selected DAC channel DMA request.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval : None
  */
void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_DAC_CHANNEL(DAC_Channel));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {
    /* Enable the selected DAC channel DMA request */
    DAC->CR |= CR_DMAEN_Set << DAC_Channel;
  }
  else
  {
    /* Disable the selected DAC channel DMA request */
    DAC->CR &= ~(CR_DMAEN_Set << DAC_Channel);
  }
}
 
/**
  * @brief  Enables or disables the selected DAC channel software trigger.
  * @param DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  * @arg DAC_Channel_1: DAC Channel1 selected
  * @arg DAC_Channel_2: DAC Channel2 selected
  * @param NewState: new state of the selected DAC channel software trigger.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval : None
  */
void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_DAC_CHANNEL(DAC_Channel));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {
    /* Enable software trigger for the selected DAC channel */
    DAC->SWTRIGR |= SWTRIGR_SWTRIG_Set << (DAC_Channel >> 4);
  }
  else
  {
    /* Disable software trigger for the selected DAC channel */
    DAC->SWTRIGR &= ~(SWTRIGR_SWTRIG_Set << (DAC_Channel >> 4));
  }
}
 
/**
  * @brief  Enables or disables simultaneously the two DAC channels software
  *   triggers.
  * @param NewState: new state of the DAC channels software triggers.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval : None
  */
void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {
    /* Enable software trigger for both DAC channels */
    DAC->SWTRIGR |= DUAL_SWTRIG_Set ;
  }
  else
  {
    /* Disable software trigger for both DAC channels */
    DAC->SWTRIGR &= DUAL_SWTRIG_Reset;
  }
}
 
/**
  * @brief  Enables or disables the selected DAC channel wave generation.
  * @param DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  * @arg DAC_Channel_1: DAC Channel1 selected
  * @arg DAC_Channel_2: DAC Channel2 selected
  * @param DAC_Wave: Specifies the wave type to enable or disable.
  *   This parameter can be one of the following values:
  * @arg DAC_Wave_Noise: noise wave generation
  * @arg DAC_Wave_Triangle: triangle wave generation
  * @param NewState: new state of the selected DAC channel wave generation.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval : None
  */
void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_DAC_CHANNEL(DAC_Channel));
  assert_param(IS_DAC_WAVE(DAC_Wave)); 
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {
    /* Enable the selected wave generation for the selected DAC channel */
    DAC->CR |= DAC_Wave << DAC_Channel;
  }
  else
  {
    /* Disable the selected wave generation for the selected DAC channel */
    DAC->CR &= ~(DAC_Wave << DAC_Channel);
  }
}
 
/**
  * @brief  Set the specified data holding register value for DAC channel1.
  * @param DAC_Align: Specifies the data alignement for DAC channel1.
  *   This parameter can be one of the following values:
  * @arg DAC_Align_8b_R: 8bit right data alignement selected
  * @arg DAC_Align_12b_L: 12bit left data alignement selected
  * @arg DAC_Align_12b_R: 12bit right data alignement selected
  * @param Data : Data to be loaded in the selected data holding 
  *   register.
  * @retval : None
  */
void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
{
  /* Check the parameters */
  assert_param(IS_DAC_ALIGN(DAC_Align));
  assert_param(IS_DAC_DATA(Data));
  /* Set the DAC channel1 selected data holding register */
  *((__IO uint32_t *)(DAC_BASE + DHR12R1_Offset + DAC_Align)) = (uint32_t)Data;
}
 
/**
  * @brief  Set the specified data holding register value for DAC channel2.
  * @param DAC_Align: Specifies the data alignement for DAC channel2.
  *   This parameter can be one of the following values:
  * @arg DAC_Align_8b_R: 8bit right data alignement selected
  * @arg DAC_Align_12b_L: 12bit left data alignement selected
  * @arg DAC_Align_12b_R: 12bit right data alignement selected
  * @param Data : Data to be loaded in the selected data holding 
  *   register.
  * @retval : None
  */
void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
{
  /* Check the parameters */
  assert_param(IS_DAC_ALIGN(DAC_Align));
  assert_param(IS_DAC_DATA(Data));
  /* Set the DAC channel2 selected data holding register */
  *((__IO uint32_t *)(DAC_BASE + DHR12R2_Offset + DAC_Align)) = (uint32_t)Data;
}
 
/**
  * @brief  Set the specified data holding register value for dual channel
  *   DAC.
  * @param DAC_Align: Specifies the data alignement for dual channel DAC.
  *   This parameter can be one of the following values:
  * @arg DAC_Align_8b_R: 8bit right data alignement selected
  * @arg DAC_Align_12b_L: 12bit left data alignement selected
  * @arg DAC_Align_12b_R: 12bit right data alignement selected
  * @param Data2: Data for DAC Channel2 to be loaded in the selected data 
  *   holding register.
  * @param Data1: Data for DAC Channel1 to be loaded in the selected data 
  *   holding register.
  * @retval : None
  */
void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
{
  uint32_t data = 0;
  /* Check the parameters */
  assert_param(IS_DAC_ALIGN(DAC_Align));
  assert_param(IS_DAC_DATA(Data1));
  assert_param(IS_DAC_DATA(Data2));
 
  /* Calculate and set dual DAC data holding register value */
  if (DAC_Align == DAC_Align_8b_R)
  {
    data = ((uint32_t)Data2 << 8) | Data1; 
  }
  else
  {
    data = ((uint32_t)Data2 << 16) | Data1;
  }
  /* Set the dual DAC selected data holding register */
  *((__IO uint32_t *)(DAC_BASE + DHR12RD_Offset + DAC_Align)) = data;
}
 
/**
  * @brief  Returns the last data output value of the selected DAC cahnnel.
  * @param DAC_Channel: the selected DAC channel. 
  *   This parameter can be one of the following values:
  * @arg DAC_Channel_1: DAC Channel1 selected
  * @arg DAC_Channel_2: DAC Channel2 selected
  * @retval : The selected DAC channel data output value.
  */
uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
{
  /* Check the parameters */
  assert_param(IS_DAC_CHANNEL(DAC_Channel));
  /* Returns the DAC channel data output register value */
  return (uint16_t) (*(__IO uint32_t*)(DAC_BASE + DOR_Offset + ((uint32_t)DAC_Channel >> 2)));
}
 
/**
  * @}
  */
 
/**
  * @}
  */
 
/**
  * @}
  */
 
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/