URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [Common/] [drivers/] [ST/] [STM32F10xFWLib/] [src/] [stm32f10x_tim.c] - Rev 610
Go to most recent revision | Compare with Previous | Blame | View Log
/******************** (C) COPYRIGHT 2007 STMicroelectronics ******************** * File Name : stm32f10x_tim.c * Author : MCD Application Team * Date First Issued : 09/29/2006 * Description : This file provides all the TIM firmware functions. ******************************************************************************** * History: * 04/02/2007: V0.2 * 02/05/2007: V0.1 * 09/29/2006: V0.01 ******************************************************************************** * THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. * AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE * CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING * INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. *******************************************************************************/ /* Includes ------------------------------------------------------------------*/ #include "stm32f10x_tim.h" #include "stm32f10x_rcc.h" /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* ---------------------- TIM registers bit mask ------------------------ */ #define CR1_CEN_Set ((u16)0x0001) #define CR1_CEN_Reset ((u16)0x03FE) #define CR1_UDIS_Set ((u16)0x0002) #define CR1_UDIS_Reset ((u16)0x03FD) #define CR1_URS_Set ((u16)0x0004) #define CR1_URS_Reset ((u16)0x03FB) #define CR1_OPM_Mask ((u16)0x03F7) #define CR1_CounterMode_Mask ((u16)0x039F) #define CR1_ARPE_Set ((u16)0x0080) #define CR1_ARPE_Reset ((u16)0x037F) #define CR1_CKD_Mask ((u16)0x00FF) #define CR2_CCDS_Set ((u16)0x0008) #define CR2_CCDS_Reset ((u16)0x0007) #define CR2_MMS_Mask ((u16)0x0080) #define CR2_TI1S_Set ((u16)0x0080) #define CR2_TI1S_Reset ((u16)0xFF70) #define SMCR_SMS_Mask ((u16)0xFFF0) #define SMCR_ETR_Mask ((u16)0x00F7) #define SMCR_TS_Mask ((u16)0xFF87) #define SMCR_MSM_Mask ((u16)0xFF77) #define SMCR_ECE_Set ((u16)0x4000) #define CCMR_CC13S_Mask ((u16)0x7F7C) #define CCMR_CC24S_Mask ((u16)0x7C7F) #define CCMR_TI13Direct_Set ((u16)0x0001) #define CCMR_TI24Direct_Set ((u16)0x0100) #define CCMR_OC13FE_Mask ((u16)0x7F7B) #define CCMR_OC24FE_Mask ((u16)0x7B7F) #define CCMR_OC13PE_Mask ((u16)0x7F77) #define CCMR_OC24PE_Mask ((u16)0x777F) #define CCMR_OCM13_Mask ((u16)0x7F0F) #define CCMR_OCM24_Mask ((u16)0x0F7F) #define CCMR_IC13PSC_Mask ((u16)0xFFF3) #define CCMR_IC24PSC_Mask ((u16)0xF3FF) #define CCMR_IC13F_Mask ((u16)0xFF0F) #define CCMR_IC24F_Mask ((u16)0x0FFF) #define CCER_CC1P_Mask ((u16)0xFFFD) #define CCER_CC2P_Mask ((u16)0xFFDF) #define CCER_CC3P_Mask ((u16)0xFDFF) #define CCER_CC4P_Mask ((u16)0xDFFF) #define CCRE_CC1E_Set ((u16)0x0001) #define CCRE_CC1E_Reset ((u16)0xFFFE) #define CCRE_CC1E_Mask ((u16)0xFFFE) #define CCRE_CC2E_Set ((u16)0x0010) #define CCRE_CC2E_Reset ((u16)0xFFEF) #define CCRE_CC2E_Mask ((u16)0xFFEF) #define CCRE_CC3E_Set ((u16)0x0100) #define CCRE_CC3E_Reset ((u16)0xFEFF) #define CCRE_CC4E_Set ((u16)0x1000) #define CCRE_CC4E_Reset ((u16)0xEFFF) #define CCRE_CC4E_Mask ((u16)0xEFFF) #define DCR_DMA_Mask ((u16)0x0000) /* TIM private Masks */ #define TIM_Period_Reset_Mask ((u16)0x0000) #define TIM_Prescaler_Reset_Mask ((u16)0x0000) #define TIM_Pulse_Reset_Mask ((u16)0x0000) #define TIM_ICFilter_Mask ((u8)0x00) /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ static uc16 Tab_OCModeMask[4] = {0xFF00, 0x00FF, 0xFF00, 0x00FF}; static uc16 Tab_PolarityMask[4] = {CCER_CC1P_Mask, CCER_CC2P_Mask, CCER_CC3P_Mask, CCER_CC4P_Mask}; /* Private function prototypes -----------------------------------------------*/ static void PWMI_Config(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); static void TI1_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, u8 TIM_ICFilter); static void TI2_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, u8 TIM_ICFilter); static void TI3_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, u8 TIM_ICFilter); static void TI4_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, u8 TIM_ICFilter); static void ETR_Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, u8 ExtTRGFilter); /* Private functions ---------------------------------------------------------*/ /******************************************************************************* * Function Name : TIM_DeInit * Description : Deinitializes the TIMx peripheral registers to their default * reset values. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * Output : None * Return : None *******************************************************************************/ void TIM_DeInit(TIM_TypeDef* TIMx) { switch (*(u32*)&TIMx) { case TIM2_BASE: RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); break; case TIM3_BASE: RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); break; case TIM4_BASE: RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); break; default: break; } } /******************************************************************************* * Function Name : TIM_TimeBaseInit * Description : Initializes the TIMx Time Base Unit peripheral according to * the specified parameters in the TIM_TimeBaseInitStruct. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef * structure that contains the configuration information for * the specified TIM peripheral. * Output : None * Return : None *******************************************************************************/ void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) { /* Check the parameters */ assert(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); assert(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); /* Set the Autoreload value */ TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; /* Set the Prescaler value */ TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; /* Select the Counter Mode and set the clock division */ TIMx->CR1 &= CR1_CKD_Mask & CR1_CounterMode_Mask; TIMx->CR1 |= (u32)TIM_TimeBaseInitStruct->TIM_ClockDivision | TIM_TimeBaseInitStruct->TIM_CounterMode; } /******************************************************************************* * Function Name : TIM_OCInit * Description : Initializes the TIMx peripheral according to the specified * parameters in the TIM_OCInitStruct. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure * that contains the configuration information for the specified * TIM peripheral. * Output : None * Return : None *******************************************************************************/ void TIM_OCInit(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) { u32 tmpccmrx = 0, tmpccer = 0; /* Check the parameters */ assert(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); assert(IS_TIM_CHANNEL(TIM_OCInitStruct->TIM_Channel)); assert(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); tmpccer = TIMx->CCER; if ((TIM_OCInitStruct->TIM_Channel == (u16)TIM_Channel_1) || (TIM_OCInitStruct->TIM_Channel == (u16)TIM_Channel_2)) { tmpccmrx = TIMx->CCMR1; /* Reset the Output Compare Bits */ tmpccmrx &= Tab_OCModeMask[TIM_OCInitStruct->TIM_Channel]; /* Set the Output Polarity level */ tmpccer &= Tab_PolarityMask[TIM_OCInitStruct->TIM_Channel]; if (TIM_OCInitStruct->TIM_Channel == TIM_Channel_1) { /* Disable the Channel 1: Reset the CCE Bit */ TIMx->CCER &= CCRE_CC1E_Reset; /* Select the Output Compare Mode */ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; /* Set the Capture Compare Register value */ TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; /* Set the Capture Compare Enable Bit */ tmpccer |= CCRE_CC1E_Set; /* Set the Capture Compare Polarity */ tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; } else /* TIM_Channel_2 */ { /* Disable the Channel 2: Reset the CCE Bit */ TIMx->CCER &= CCRE_CC2E_Reset; /* Select the Output Compare Mode */ tmpccmrx |= (u32)TIM_OCInitStruct->TIM_OCMode << 8; /* Set the Capture Compare Register value */ TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; /* Set the Capture Compare Enable Bit */ tmpccer |= CCRE_CC2E_Set; /* Set the Capture Compare Polarity */ tmpccer |= (u32)TIM_OCInitStruct->TIM_OCPolarity << 4; } TIMx->CCMR1 = (u16)tmpccmrx; } else { if ((TIM_OCInitStruct->TIM_Channel == TIM_Channel_3) || (TIM_OCInitStruct->TIM_Channel == TIM_Channel_4)) { tmpccmrx = TIMx->CCMR2; /* Reset the Output Compare Bits */ tmpccmrx &= Tab_OCModeMask[TIM_OCInitStruct->TIM_Channel]; /* Set the Output Polarity level */ tmpccer &= Tab_PolarityMask[TIM_OCInitStruct->TIM_Channel]; if (TIM_OCInitStruct->TIM_Channel == TIM_Channel_3) { /* Disable the Channel 3: Reset the CCE Bit */ TIMx->CCER &= CCRE_CC3E_Reset; /* Select the Output Compare Mode */ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; /* Set the Capture Compare Register value */ TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; /* Set the Capture Compare Enable Bit */ tmpccer |= CCRE_CC3E_Set; /* Set the Capture Compare Polarity */ tmpccer |= (u32)TIM_OCInitStruct->TIM_OCPolarity << 8; } else /* TIM_Channel_4 */ { /* Disable the Channel 4: Reset the CCE Bit */ TIMx->CCER &= CCRE_CC4E_Reset; /* Select the Output Compare Mode */ tmpccmrx |= (u32)TIM_OCInitStruct->TIM_OCMode << 8; /* Set the Capture Compare Register value */ TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; /* Set the Capture Compare Enable Bit */ tmpccer |= CCRE_CC4E_Set; /* Set the Capture Compare Polarity */ tmpccer |= (u32)TIM_OCInitStruct->TIM_OCPolarity << 12; } TIMx->CCMR2 = (u16)tmpccmrx; } } TIMx->CCER = (u16)tmpccer; } /******************************************************************************* * Function Name : TIM_ICInit * Description : Initializes the TIMx peripheral according to the specified * parameters in the TIM_ICInitStruct. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure * that contains the configuration information for the specified * TIM peripheral. * Output : None * Return : None *******************************************************************************/ void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) { /* Check the parameters */ assert(IS_TIM_IC_MODE(TIM_ICInitStruct->TIM_ICMode)); assert(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel)); assert(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); assert(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); assert(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); assert(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); if (TIM_ICInitStruct->TIM_ICMode == TIM_ICMode_ICAP) { if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) { /* TI1 Configuration */ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, TIM_ICInitStruct->TIM_ICFilter); /* Set the Input Capture Prescaler value */ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); } else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) { /* TI2 Configuration */ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, TIM_ICInitStruct->TIM_ICFilter); /* Set the Input Capture Prescaler value */ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); } else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) { /* TI3 Configuration */ TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, TIM_ICInitStruct->TIM_ICFilter); /* Set the Input Capture Prescaler value */ TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); } else /* TIM_Channel_4 */ { /* TI4 Configuration */ TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, TIM_ICInitStruct->TIM_ICFilter); /* Set the Input Capture Prescaler value */ TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); } } else { PWMI_Config(TIMx, TIM_ICInitStruct); } } /******************************************************************************* * Function Name : TIM_TimeBaseStructInit * Description : Fills each TIM_TimeBaseInitStruct member with its default value. * Input : - TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef * structure which will be initialized. * Output : None * Return : None *******************************************************************************/ void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) { /* Set the default configuration */ TIM_TimeBaseInitStruct->TIM_Period = TIM_Period_Reset_Mask; TIM_TimeBaseInitStruct->TIM_Prescaler = TIM_Prescaler_Reset_Mask; TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; } /******************************************************************************* * Function Name : TIM_OCStructInit * Description : Fills each TIM_OCInitStruct member with its default value. * Input : - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure * which will be initialized. * Output : None * Return : None *******************************************************************************/ void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) { /* Set the default configuration */ TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; TIM_OCInitStruct->TIM_Channel = TIM_Channel_1; TIM_OCInitStruct->TIM_Pulse = TIM_Pulse_Reset_Mask; TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; } /******************************************************************************* * Function Name : TIM_ICStructInit * Description : Fills each TIM_InitStruct member with its default value. * Input : - TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure * which will be initialized. * Output : None * Return : None *******************************************************************************/ void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) { /* Set the default configuration */ TIM_ICInitStruct->TIM_ICMode = TIM_ICMode_ICAP; TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; TIM_ICInitStruct->TIM_ICFilter = TIM_ICFilter_Mask; } /******************************************************************************* * Function Name : TIM_Cmd * Description : Enables or disables the specified TIM peripheral. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIMx peripheral. * - Newstate: new state of the TIMx peripheral. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the TIM Counter */ TIMx->CR1 |= CR1_CEN_Set; } else { /* Disable the TIM Counter */ TIMx->CR1 &= CR1_CEN_Reset; } } /******************************************************************************* * Function Name : TIM_ITConfig * Description : Enables or disables the TIMx interrupts. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_IT: specifies the TIM interrupts sources to be enabled * or disabled. * This parameter can be any combination of the following values: * - TIM_IT_Update: Timer update Interrupt * - TIM_IT_CC1: Capture Compare 1 Interrupt * - TIM_IT_CC2: Capture Compare 2 Interrupt * - TIM_IT_CC3: Capture Compare 3 Interrupt * - TIM_IT_CC4: Capture Compare 4 Interrupt * - TIM_IT_Trigger: Trigger Interrupt * - Newstate: new state of the specified TIMx interrupts. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void TIM_ITConfig(TIM_TypeDef* TIMx, u16 TIM_IT, FunctionalState NewState) { /* Check the parameters */ assert(IS_TIM_IT(TIM_IT)); assert(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the Interrupt sources */ TIMx->DIER |= TIM_IT; } else { /* Disable the Interrupt sources */ TIMx->DIER &= (u16)(~TIM_IT); } } /******************************************************************************* * Function Name : TIM_DMAConfig * Description : Configures the TIMx’s DMA interface. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_DMABase: DMA Base address. * This parameter can be one of the following values: * - TIM_DMABase_CR1, TIM_DMABase_CR2, TIM_DMABase_SMCR, * TIM_DMABase_DIER, TIM_DMABase_SR, TIM_DMABase_EGR, * TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER, * TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR, * TIM_DMABase_CCR1, TIM_DMABase_CCR2, TIM_DMABase_CCR3, * TIM_DMABase_CCR4, TIM_DMABase_DCR. * - TIM_DMABurstLength: DMA Burst length. * This parameter can be one value between: * TIM_DMABurstLength_1Byte and TIM_DMABurstLength_18Bytes. * Output : None * Return : None *******************************************************************************/ void TIM_DMAConfig(TIM_TypeDef* TIMx, u16 TIM_DMABase, u16 TIM_DMABurstLength) { u32 tmpdcr = 0; /* Check the parameters */ assert(IS_TIM_DMA_BASE(TIM_DMABase)); assert(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); tmpdcr = TIMx->DCR; /* Reset the DBA and the DBL Bits */ tmpdcr &= DCR_DMA_Mask; /* Set the DMA Base and the DMA Burst Length */ tmpdcr |= TIM_DMABase | TIM_DMABurstLength; TIMx->DCR = (u16)tmpdcr; } /******************************************************************************* * Function Name : TIM_DMACmd * Description : Enables or disables the TIMx’s DMA Requests. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_DMASources: specifies the DMA Request sources. * This parameter can be any combination of the following values: * - TIM_DMA_CC1: Capture Compare 1 DMA source * - TIM_DMA_CC2: Capture Compare 2 DMA source * - TIM_DMA_CC3: Capture Compare 3 DMA source * - TIM_DMA_CC4: Capture Compare 4 DMA source * - TIM_DMA_Trigger: Trigger DMA source * - Newstate: new state of the DMA Request sources. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void TIM_DMACmd(TIM_TypeDef* TIMx, u16 TIM_DMASource, FunctionalState Newstate) { u32 tmpdier = 0; /* Check the parameters */ assert(IS_TIM_DMA_SOURCE(TIM_DMASource)); assert(IS_FUNCTIONAL_STATE(Newstate)); tmpdier = TIMx->DIER; if (Newstate != DISABLE) { /* Enable the DMA sources */ tmpdier |= TIM_DMASource; } else { /* Disable the DMA sources */ tmpdier &= (u16)(~TIM_DMASource); } TIMx->DIER = (u16)tmpdier; } /******************************************************************************* * Function Name : TIM_InternalClockConfig * Description : Configures the TIMx interrnal Clock * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * Output : None * Return : None *******************************************************************************/ void TIM_InternalClockConfig(TIM_TypeDef* TIMx) { /* Disable slave mode to clock the prescaler directly with the internal clock */ TIMx->SMCR &= SMCR_SMS_Mask; } /******************************************************************************* * Function Name : TIM_ITRxExternalClockConfig * Description : Configures the TIMx Internal Trigger as External Clock * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ITRSource: Trigger source. * This parameter can be one of the following values: * - TIM_TS_ITR0: Internal Trigger 0 * - TIM_TS_ITR1: Internal Trigger 1 * - TIM_TS_ITR2: Internal Trigger 2 * - TIM_TS_ITR3: Internal Trigger 3 * Output : None * Return : None *******************************************************************************/ void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource) { /* Check the parameters */ assert(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); /* Select the Internal Trigger */ TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); /* Select the External clock mode1 */ TIMx->SMCR |= TIM_SlaveMode_External1; } /******************************************************************************* * Function Name : TIM_TIxExternalClockConfig * Description : Configures the TIMx Trigger as External Clock * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_TIxExternalCLKSource: Trigger source. * This parameter can be one of the following values: * - TIM_TS_TI1F_ED: TI1 Edge Detector * - TIM_TS_TI1FP1: Filtered Timer Input 1 * - TIM_TS_TI2FP2: Filtered Timer Input 2 * - TIM_ICPolarity: specifies the TIx Polarity. * This parameter can be: * - TIM_ICPolarity_Rising * - TIM_ICPolarity_Falling * - ICFilter : specifies the filter value. * This parameter must be a value between 0x0 and 0xF. * Output : None * Return : None *******************************************************************************/ void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_TIxExternalCLKSource, u16 TIM_ICPolarity, u8 ICFilter) { /* Check the parameters */ assert(IS_TIM_TIX_TRIGGER_SELECTION(TIM_TIxExternalCLKSource)); assert(IS_TIM_IC_POLARITY(TIM_ICPolarity)); assert(IS_TIM_IC_FILTER(ICFilter)); /* Configure the Timer Input Clock Source */ if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) { TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); } else { TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); } /* Select the Trigger source */ TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); /* Select the External clock mode1 */ TIMx->SMCR |= TIM_SlaveMode_External1; } /******************************************************************************* * Function Name : TIM_ETRClockMode1Config * Description : Configures the External clock Mode1 * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ExtTRGPrescaler: The external Trigger Prescaler. * It can be one of the following values: * - TIM_ExtTRGPSC_OFF * - TIM_ExtTRGPSC_DIV2 * - TIM_ExtTRGPSC_DIV4 * - TIM_ExtTRGPSC_DIV8. * - TIM_ExtTRGPolarity: The external Trigger Polarity. * It can be one of the following values: * - TIM_ExtTRGPolarity_Inverted * - TIM_ExtTRGPolarity_NonInverted * - ExtTRGFilter: External Trigger Filter. * This parameter must be a value between 0x00 and 0x0F * Output : None * Return : None *******************************************************************************/ void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, u8 ExtTRGFilter) { /* Check the parameters */ assert(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); assert(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); /* Configure the ETR Clock source */ ETR_Config(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); /* Select the External clock mode1 */ TIMx->SMCR &= SMCR_SMS_Mask; TIMx->SMCR |= TIM_SlaveMode_External1; /* Select the Trigger selection : ETRF */ TIMx->SMCR &= SMCR_TS_Mask; TIMx->SMCR |= TIM_TS_ETRF; } /******************************************************************************* * Function Name : TIM_ETRClockMode2Config * Description : Configures the External clock Mode2 * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ExtTRGPrescaler: The external Trigger Prescaler. * It can be one of the following values: * - TIM_ExtTRGPSC_OFF * - TIM_ExtTRGPSC_DIV2 * - TIM_ExtTRGPSC_DIV4 * - TIM_ExtTRGPSC_DIV8 * - TIM_ExtTRGPolarity: The external Trigger Polarity. * It can be one of the following values: * - TIM_ExtTRGPolarity_Inverted * - TIM_ExtTRGPolarity_NonInverted * - ExtTRGFilter: External Trigger Filter. * This parameter must be a value between 0x00 and 0x0F * Output : None * Return : None *******************************************************************************/ void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, u8 ExtTRGFilter) { /* Check the parameters */ assert(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); assert(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); /* Configure the ETR Clock source */ ETR_Config(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); /* Enable the External clock mode2 */ TIMx->SMCR |= SMCR_ECE_Set; } /******************************************************************************* * Function Name : TIM_SelectInputTrigger * Description : Selects the Input Trigger source * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_InputTriggerSource: The Input Trigger source. * This parameter can be one of the following values: * - TIM_TS_ITR0: Internal Trigger 0 * - TIM_TS_ITR1: Internal Trigger 1 * - TIM_TS_ITR2: Internal Trigger 2 * - TIM_TS_ITR3: Internal Trigger 3 * - TIM_TS_TI1F_ED: TI1 Edge Detector * - TIM_TS_TI1FP1: Filtered Timer Input 1 * - TIM_TS_TI2FP2: Filtered Timer Input 2 * - TIM_TS_ETRF: External Trigger input * Output : None * Return : None *******************************************************************************/ void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource) { u32 tmpsmcr = 0; /* Check the parameters */ assert(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); tmpsmcr = TIMx->SMCR; /* Select the Tgigger Source */ tmpsmcr &= SMCR_TS_Mask; tmpsmcr |= TIM_InputTriggerSource; TIMx->SMCR = (u16)tmpsmcr; } /******************************************************************************* * Function Name : TIM_PrescalerConfig * Description : Configures the TIMx Prescaler. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Prescaler: specifies the Prescaler Register value * - TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode * This parameter can be one of the following values: * - TIM_PSCReloadMode_Update: The Prescaler is loaded at * the update event. * - TIM_PSCReloadMode_Immediate: The Prescaler is loaded * immediatly. * Output : None * Return : None *******************************************************************************/ void TIM_PrescalerConfig(TIM_TypeDef* TIMx, u16 Prescaler, u16 TIM_PSCReloadMode) { /* Check the parameters */ assert(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); /* Set the Prescaler value */ TIMx->PSC = Prescaler; /* Set or reset the UG Bit */ if (TIM_PSCReloadMode == TIM_PSCReloadMode_Immediate) { TIMx->EGR |= TIM_EventSource_Update; } else { TIMx->EGR &= TIM_EventSource_Update; } } /******************************************************************************* * Function Name : TIM_CounterModeConfig * Description : Specifies the TIMx Counter Mode to be used. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_CounterMode: specifies the Counter Mode to be used * This parameter can be one of the following values: * - TIM_CounterMode_Up: TIM Up Counting Mode * - TIM_CounterMode_Down: TIM Down Counting Mode * - TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 * - TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 * - TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 * Output : None * Return : None *******************************************************************************/ void TIM_CounterModeConfig(TIM_TypeDef* TIMx, u16 TIM_CounterMode) { u32 tmpcr1 = 0; /* Check the parameters */ assert(IS_TIM_COUNTER_MODE(TIM_CounterMode)); tmpcr1 = TIMx->CR1; /* Reset the CMS and DIR Bits */ tmpcr1 &= CR1_CounterMode_Mask; /* Set the Counter Mode */ tmpcr1 |= TIM_CounterMode; TIMx->CR1 = (u16)tmpcr1; } /******************************************************************************* * Function Name : TIM_ForcedOC1Config * Description : Forces the TIMx output 1 waveform to active or inactive level. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ForcedAction: specifies the forced Action to be set to * the output waveform. * This parameter can be one of the following values: * - TIM_ForcedAction_Active: Force active level on OC1REF * - TIM_ForcedAction_InActive: Force inactive level on * OC1REF. * Output : None * Return : None *******************************************************************************/ void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) { u32 tmpccmr1 = 0; /* Check the parameters */ assert(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); tmpccmr1 = TIMx->CCMR1; /* Reset the OCM Bits */ tmpccmr1 &= CCMR_OCM13_Mask; /* Configure The Forced output Mode */ tmpccmr1 |= TIM_ForcedAction; TIMx->CCMR1 = (u16)tmpccmr1; } /******************************************************************************* * Function Name : TIM_ForcedOC2Config * Description : Forces the TIMx output 2 waveform to active or inactive level. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ForcedAction: specifies the forced Action to be set to * the output waveform. * This parameter can be one of the following values: * - TIM_ForcedAction_Active: Force active level on OC2REF * - TIM_ForcedAction_InActive: Force inactive level on * OC2REF. * Output : None * Return : None *******************************************************************************/ void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) { u32 tmpccmr1 = 0; /* Check the parameters */ assert(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); tmpccmr1 = TIMx->CCMR1; /* Reset the OCM Bits */ tmpccmr1 &= CCMR_OCM24_Mask; /* Configure The Forced output Mode */ tmpccmr1 |= (u16)(TIM_ForcedAction << 8); TIMx->CCMR1 = (u16)tmpccmr1; } /******************************************************************************* * Function Name : TIM_ForcedOC3Config * Description : Forces the TIMx output 3 waveform to active or inactive level. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ForcedAction: specifies the forced Action to be set to * the output waveform. * This parameter can be one of the following values: * - TIM_ForcedAction_Active: Force active level on OC3REF * - TIM_ForcedAction_InActive: Force inactive level on * OC3REF. * Output : None * Return : None *******************************************************************************/ void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) { u32 tmpccmr2 = 0; /* Check the parameters */ assert(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); tmpccmr2 = TIMx->CCMR2; /* Reset the OCM Bits */ tmpccmr2 &= CCMR_OCM13_Mask; /* Configure The Forced output Mode */ tmpccmr2 |= TIM_ForcedAction; TIMx->CCMR2 = (u16)tmpccmr2; } /******************************************************************************* * Function Name : TIM_ForcedOC4Config * Description : Forces the TIMx output 4 waveform to active or inactive level. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ForcedAction: specifies the forced Action to be set to * the output waveform. * This parameter can be one of the following values: * - TIM_ForcedAction_Active: Force active level on OC4REF * - TIM_ForcedAction_InActive: Force inactive level on * OC4REF. * Output : None * Return : None *******************************************************************************/ void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) { u32 tmpccmr2 = 0; /* Check the parameters */ assert(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); tmpccmr2 = TIMx->CCMR2; /* Reset the OCM Bits */ tmpccmr2 &= CCMR_OCM24_Mask; /* Configure The Forced output Mode */ tmpccmr2 |= (u16)(TIM_ForcedAction << 8); TIMx->CCMR2 = (u16)tmpccmr2; } /******************************************************************************* * Function Name : TIM_ARRPreloadConfig * Description : Enables or disables TIMx peripheral Preload register on ARR. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Newstate: new state of the TIMx peripheral Preload register * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState Newstate) { u32 tmpcr1 = 0; /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(Newstate)); tmpcr1 = TIMx->CR1; if (Newstate != DISABLE) { /* Set the ARR Preload Bit */ tmpcr1 |= CR1_ARPE_Set; } else { /* Reset the ARR Preload Bit */ tmpcr1 &= CR1_ARPE_Reset; } TIMx->CR1 = (u16)tmpcr1; } /******************************************************************************* * Function Name : TIM_SelectCCDMA * Description : Selects the TIMx peripheral Capture Compare DMA source. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Newstate: new state of the Capture Compare DMA source * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState Newstate) { u32 tmpcr2 = 0; /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(Newstate)); tmpcr2 = TIMx->CR2; if (Newstate != DISABLE) { /* Set the CCDS Bit */ tmpcr2 |= CR2_CCDS_Set; } else { /* Reset the CCDS Bit */ tmpcr2 &= CR2_CCDS_Reset; } TIMx->CR2 = (u16)tmpcr2; } /******************************************************************************* * Function Name : TIM_OC1PreloadConfig * Description : Enables or disables the TIMx peripheral Preload register on CCR1. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCPreload: new state of the TIMx peripheral Preload * register * This parameter can be one of the following values: * - TIM_OCPreload_Enable * - TIM_OCPreload_Disable * Output : None * Return : None *******************************************************************************/ void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) { u32 tmpccmr1 = 0; /* Check the parameters */ assert(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); tmpccmr1 = TIMx->CCMR1; /* Reset the OCPE Bit */ tmpccmr1 &= CCMR_OC13PE_Mask; /* Enable or Disable the Output Compare Preload feature */ tmpccmr1 |= TIM_OCPreload; TIMx->CCMR1 = (u16)tmpccmr1; } /******************************************************************************* * Function Name : TIM_OC2PreloadConfig * Description : Enables or disables the TIMx peripheral Preload register on CCR2. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCPreload: new state of the TIMx peripheral Preload * register * This parameter can be one of the following values: * - TIM_OCPreload_Enable * - TIM_OCPreload_Disable * Output : None * Return : None *******************************************************************************/ void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) { u32 tmpccmr1 = 0; /* Check the parameters */ assert(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); tmpccmr1 = TIMx->CCMR1; /* Reset the OCPE Bit */ tmpccmr1 &= CCMR_OC24PE_Mask; /* Enable or Disable the Output Compare Preload feature */ tmpccmr1 |= (u16)(TIM_OCPreload << 8); TIMx->CCMR1 = (u16)tmpccmr1; } /******************************************************************************* * Function Name : TIM_OC3PreloadConfig * Description : Enables or disables the TIMx peripheral Preload register on CCR3. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCPreload: new state of the TIMx peripheral Preload * register * This parameter can be one of the following values: * - TIM_OCPreload_Enable * - TIM_OCPreload_Disable * Output : None * Return : None *******************************************************************************/ void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) { u32 tmpccmr2 = 0; /* Check the parameters */ assert(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); tmpccmr2 = TIMx->CCMR2; /* Reset the OCPE Bit */ tmpccmr2 &= CCMR_OC13PE_Mask; /* Enable or Disable the Output Compare Preload feature */ tmpccmr2 |= TIM_OCPreload; TIMx->CCMR2 = (u16)tmpccmr2; } /******************************************************************************* * Function Name : TIM_OC4PreloadConfig * Description : Enables or disables the TIMx peripheral Preload register on CCR4. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCPreload: new state of the TIMx peripheral Preload * register * This parameter can be one of the following values: * - TIM_OCPreload_Enable * - TIM_OCPreload_Disable * Output : None * Return : None *******************************************************************************/ void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) { u32 tmpccmr2 = 0; /* Check the parameters */ assert(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); tmpccmr2 = TIMx->CCMR2; /* Reset the OCPE Bit */ tmpccmr2 &= CCMR_OC24PE_Mask; /* Enable or Disable the Output Compare Preload feature */ tmpccmr2 |= (u16)(TIM_OCPreload << 8); TIMx->CCMR2 = (u16)tmpccmr2; } /******************************************************************************* * Function Name : TIM_OC1FastConfig * Description : Configures the TIMx Output Compare 1 Fast feature. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCFast: new state of the Output Compare Fast Enable Bit. * This parameter can be one of the following values: * - TIM_OCFast_Enable * - TIM_OCFast_Disable * Output : None * Return : None *******************************************************************************/ void TIM_OC1FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) { u32 tmpccmr1 = 0; /* Check the parameters */ assert(IS_TIM_OCFAST_STATE(TIM_OCFast)); tmpccmr1 = TIMx->CCMR1; /* Reset the OCFE Bit */ tmpccmr1 &= CCMR_OC13FE_Mask; /* Enable or Disable the Output Compare Fast Bit */ tmpccmr1 |= TIM_OCFast; TIMx->CCMR1 = (u16)tmpccmr1; } /******************************************************************************* * Function Name : TIM_OC2FastConfig * Description : Configures the TIMx Output Compare 2 Fast feature. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCFast: new state of the Output Compare Fast Enable Bit. * This parameter can be one of the following values: * - TIM_OCFast_Enable * - TIM_OCFast_Disable * Output : None * Return : None *******************************************************************************/ void TIM_OC2FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) { u32 tmpccmr1 = 0; /* Check the parameters */ assert(IS_TIM_OCFAST_STATE(TIM_OCFast)); tmpccmr1 = TIMx->CCMR1; /* Reset the OCFE Bit */ tmpccmr1 &= CCMR_OC24FE_Mask; /* Enable or Disable the Output Compare Fast Bit */ tmpccmr1 |= (u16)(TIM_OCFast << 8); TIMx->CCMR1 = (u16)tmpccmr1; } /******************************************************************************* * Function Name : TIM_OC3FastConfig * Description : Configures the TIMx Output Compare 3 Fast feature. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCFast: new state of the Output Compare Fast Enable Bit. * This parameter can be one of the following values: * - TIM_OCFast_Enable * - TIM_OCFast_Disable * Output : None * Return : None *******************************************************************************/ void TIM_OC3FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) { u32 tmpccmr2 = 0; /* Check the parameters */ assert(IS_TIM_OCFAST_STATE(TIM_OCFast)); tmpccmr2 = TIMx->CCMR2; /* Reset the OCFE Bit */ tmpccmr2 &= CCMR_OC13FE_Mask; /* Enable or Disable the Output Compare Fast Bit */ tmpccmr2 |= TIM_OCFast; TIMx->CCMR2 = (u16)tmpccmr2; } /******************************************************************************* * Function Name : TIM_OC4FastConfig * Description : Configures the TIMx Output Compare 4 Fast feature. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCFast: new state of the Output Compare Fast Enable Bit. * This parameter can be one of the following values: * - TIM_OCFast_Enable * - TIM_OCFast_Disable * Output : None * Return : None *******************************************************************************/ void TIM_OC4FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) { u32 tmpccmr2 = 0; /* Check the parameters */ assert(IS_TIM_OCFAST_STATE(TIM_OCFast)); tmpccmr2 = TIMx->CCMR2; /* Reset the OCFE Bit */ tmpccmr2 &= CCMR_OC24FE_Mask; /* Enable or Disable the Output Compare Fast Bit */ tmpccmr2 |= (u16)(TIM_OCFast << 8); TIMx->CCMR2 = (u16)tmpccmr2; } /******************************************************************************* * Function Name : TIM_UpdateDisableConfig * Description : Enables or Disables the TIMx Update event. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Newstate: new state of the TIMx peripheral Preload register * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState Newstate) { u32 tmpcr1 = 0; /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(Newstate)); tmpcr1 = TIMx->CR1; if (Newstate != DISABLE) { /* Set the Update Disable Bit */ tmpcr1 |= CR1_UDIS_Set; } else { /* Reset the Update Disable Bit */ tmpcr1 &= CR1_UDIS_Reset; } TIMx->CR1 = (u16)tmpcr1; } /******************************************************************************* * Function Name : TIM_EncoderInterfaceConfig * Description : Configures the TIMx Encoder Interface. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_EncoderMode: specifies the TIMx Encoder Mode. * This parameter can be one of the following values: * - TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge * depending on TI2FP2 level. * - TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge * depending on TI1FP1 level. * - TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and * TI2FP2 edges depending on the level of the other input. * - TIM_IC1Polarity: specifies the IC1 Polarity * This parmeter can be one of the following values: * - TIM_ICPolarity_Falling * - TIM_ICPolarity_Rising * - TIM_IC2Polarity: specifies the IC2 Polarity * This parmeter can be one of the following values: * - TIM_ICPolarity_Falling * - TIM_ICPolarity_Rising * Output : None * Return : None *******************************************************************************/ void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, u16 TIM_EncoderMode, u16 TIM_IC1Polarity, u16 TIM_IC2Polarity) { u32 tmpsmcr = 0; u32 tmpccmr1 = 0; u32 tmpccer = 0; /* Check the parameters */ assert(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); assert(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); assert(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); tmpsmcr = TIMx->SMCR; tmpccmr1 = TIMx->CCMR1; tmpccer = TIMx->CCER; /* Set the encoder Mode */ tmpsmcr &= SMCR_SMS_Mask; tmpsmcr |= TIM_EncoderMode; /* Select the Capture Compare 1 and the Capture Compare 2 as input */ tmpccmr1 &= CCMR_CC13S_Mask & CCMR_CC24S_Mask; tmpccmr1 |= CCMR_TI13Direct_Set | CCMR_TI24Direct_Set; /* Set the TI1 and the TI2 Polarities */ tmpccer &= CCER_CC1P_Mask & CCER_CC2P_Mask; tmpccer |= (TIM_IC1Polarity | (u16)((u16)TIM_IC2Polarity << 4)); TIMx->SMCR = (u16)tmpsmcr; TIMx->CCMR1 = (u16)tmpccmr1; TIMx->CCER = (u16)tmpccer; } /******************************************************************************* * Function Name : TIM_GenerateEvent * Description : Configures the TIMx event to be generate by software. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_EventSource: specifies the event source. * This parameter can be one or more of the following values: * - TIM_EventSource_Update: Timer update Event source * - TIM_EventSource_CC1: Timer Capture Compare 1 Event source * - TIM_EventSource_CC2: Timer Capture Compare 2 Event source * - TIM_EventSource_CC3: Timer Capture Compare 3 Event source * - TIM_EventSource_CC4: Timer Capture Compare 4 Event source * - TIM_EventSource_Trigger: Timer Trigger Event source * Output : None * Return : None *******************************************************************************/ void TIM_GenerateEvent(TIM_TypeDef* TIMx, u16 TIM_EventSource) { /* Check the parameters */ assert(IS_TIM_EVENT_SOURCE(TIM_EventSource)); /* Set the event sources */ TIMx->EGR |= TIM_EventSource; } /******************************************************************************* * Function Name : TIM_OC1PolarityConfig * Description : Configures the TIMx channel 1 polarity. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCPolarity: specifies the OC1 Polarity * This parmeter can be one of the following values: * - TIM_OCPolarity_High: Output Compare active high * - TIM_OCPolarity_Low: Output Compare active low * Output : None * Return : None *******************************************************************************/ void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) { u32 tmpccer = 0; /* Check the parameters */ assert(IS_TIM_OC_POLARITY(TIM_OCPolarity)); tmpccer = TIMx->CCER; /* Set or Reset the CC1P Bit */ tmpccer &= CCER_CC1P_Mask; tmpccer |= TIM_OCPolarity; TIMx->CCER = (u16)tmpccer; } /******************************************************************************* * Function Name : TIM_OC2PolarityConfig * Description : Configures the TIMx channel 2 polarity. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCPolarity: specifies the OC2 Polarity * This parmeter can be one of the following values: * - TIM_OCPolarity_High: Output Compare active high * - TIM_OCPolarity_Low: Output Compare active low * Output : None * Return : None *******************************************************************************/ void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) { u32 tmpccer = 0; /* Check the parameters */ assert(IS_TIM_OC_POLARITY(TIM_OCPolarity)); tmpccer = TIMx->CCER; /* Set or Reset the CC2P Bit */ tmpccer &= CCER_CC2P_Mask; tmpccer |= (u16)((u16)TIM_OCPolarity << 4); TIMx->CCER = (u16)tmpccer; } /******************************************************************************* * Function Name : TIM_OC3PolarityConfig * Description : Configures the TIMx channel 3 polarity. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCPolarity: specifies the OC3 Polarity * This parmeter can be one of the following values: * - TIM_OCPolarity_High: Output Compare active high * - TIM_OCPolarity_Low: Output Compare active low * Output : None * Return : None *******************************************************************************/ void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) { u32 tmpccer = 0; /* Check the parameters */ assert(IS_TIM_OC_POLARITY(TIM_OCPolarity)); tmpccer = TIMx->CCER; /* Set or Reset the CC3P Bit */ tmpccer &= CCER_CC3P_Mask; tmpccer |= (u16)((u16)TIM_OCPolarity << 8); TIMx->CCER = (u16)tmpccer; } /******************************************************************************* * Function Name : TIM_OC4PolarityConfig * Description : Configures the TIMx channel 4 polarity. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OCPolarity: specifies the OC4 Polarity * This parmeter can be one of the following values: * - TIM_OCPolarity_High: Output Compare active high * - TIM_OCPolarity_Low: Output Compare active low * Output : None * Return : None *******************************************************************************/ void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) { u32 tmpccer = 0; /* Check the parameters */ assert(IS_TIM_OC_POLARITY(TIM_OCPolarity)); tmpccer = TIMx->CCER; /* Set or Reset the CC4P Bit */ tmpccer &= CCER_CC4P_Mask; tmpccer |= (u16)((u16)TIM_OCPolarity << 12); TIMx->CCER = (u16)tmpccer; } /******************************************************************************* * Function Name : TIM_UpdateRequestConfig * Description : Configures the TIMx Update Request Interrupt source. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_UpdateSource: specifies the Update source. * This parameter can be one of the following values: * - TIM_UpdateSource_Regular * - TIM_UpdateSource_Global * Output : None * Return : None *******************************************************************************/ void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, u16 TIM_UpdateSource) { u32 tmpcr1 = 0; /* Check the parameters */ assert(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); tmpcr1 = TIMx->CR1; if (TIM_UpdateSource == TIM_UpdateSource_Regular) { /* Set the URS Bit */ tmpcr1 |= CR1_URS_Set; } else { /* Reset the URS Bit */ tmpcr1 &= CR1_URS_Reset; } TIMx->CR1 = (u16)tmpcr1; } /******************************************************************************* * Function Name : TIM_SelectHallSensor * Description : Enables or disables the TIMx’s Hall sensor interface. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Newstate: new state of the TIMx Hall sensor interface. * This parameter can be: ENABLE or DISABLE. * Output : None * Return : None *******************************************************************************/ void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState Newstate) { /* Check the parameters */ assert(IS_FUNCTIONAL_STATE(Newstate)); if (Newstate != DISABLE) { /* Set the TI1S Bit */ TIMx->CR2 |= CR2_TI1S_Set; } else { /* Reset the TI1S Bit */ TIMx->CR2 &= CR2_TI1S_Reset; } } /******************************************************************************* * Function Name : TIM_SelectOnePulseMode * Description : Selects the TIMx’s One Pulse Mode. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_OPMode: specifies the OPM Mode to be used. * This parameter can be one of the following values: * - TIM_OPMode_Single * - TIM_OPMode_Repetitive * Output : None * Return : None *******************************************************************************/ void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, u16 TIM_OPMode) { u32 tmpcr1 = 0; /* Check the parameters */ assert(IS_TIM_OPM_MODE(TIM_OPMode)); tmpcr1 = TIMx->CR1; /* Reset the OPM Bit */ tmpcr1 &= CR1_OPM_Mask; /* Configure the OPM Mode */ tmpcr1 |= TIM_OPMode; TIMx->CR1 = (u16)tmpcr1; } /******************************************************************************* * Function Name : TIM_SelectOutputTrigger * Description : Selects the TIMx Trigger Output Mode. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_TRGOSource: specifies the Trigger Output source. * This paramter can be one of the following values: * - TIM_TRGOSource_Reset * - TIM_TRGOSource_Enable * - TIM_TRGOSource_Update * - TIM_TRGOSource_OC1 * - TIM_TRGOSource_OC1Ref * - TIM_TRGOSource_OC2Ref * - TIM_TRGOSource_OC3Ref * - TIM_TRGOSource_OC4Ref * Output : None * Return : None *******************************************************************************/ void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, u16 TIM_TRGOSource) { u32 tmpcr2 = 0; /* Check the parameters */ assert(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); tmpcr2 = TIMx->CR2; /* Reset the MMS Bits */ tmpcr2 &= CR2_MMS_Mask; /* Select the TRGO source */ tmpcr2 |= TIM_TRGOSource; TIMx->CR2 = (u16)tmpcr2; } /******************************************************************************* * Function Name : TIM_SelectSlaveMode * Description : Selects the TIMx Slave Mode. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_SlaveMode: specifies the Timer Slave Mode. * This paramter can be one of the following values: * - TIM_SlaveMode_Reset * - TIM_SlaveMode_Gated * - TIM_SlaveMode_Trigger * - TIM_SlaveMode_External1 * Output : None * Return : None *******************************************************************************/ void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, u16 TIM_SlaveMode) { u32 tmpsmcr = 0; /* Check the parameters */ assert(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); tmpsmcr = TIMx->SMCR; /* Reset the SMS Bits */ tmpsmcr &= SMCR_SMS_Mask; /* Select the Slave Mode */ tmpsmcr |= TIM_SlaveMode; TIMx->SMCR = (u16)tmpsmcr; } /******************************************************************************* * Function Name : TIM_SelectMasterSlaveMode * Description : Sets or Resets the TIMx Master/Slave Mode. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. * This paramter can be one of the following values: * - TIM_MasterSlaveMode_Enable: synchronization between the * current timer and its slaves (through TRGO). * - TIM_MasterSlaveMode_Disable: No action * Output : None * Return : None *******************************************************************************/ void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, u16 TIM_MasterSlaveMode) { u32 tmpsmcr = 0; /* Check the parameters */ assert(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); tmpsmcr = TIMx->SMCR; /* Set or Reset the MSM Bit */ tmpsmcr &= SMCR_MSM_Mask; tmpsmcr |= TIM_MasterSlaveMode; TIMx->SMCR = (u16)tmpsmcr; } /******************************************************************************* * Function Name : TIM_SetAutoreload * Description : Sets the TIMx Autoreload Register value * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Autoreload: specifies the Autoreload register new value. * Output : None * Return : None *******************************************************************************/ void TIM_SetAutoreload(TIM_TypeDef* TIMx, u16 Autoreload) { /* Set the Autoreload Register value */ TIMx->ARR = Autoreload; } /******************************************************************************* * Function Name : TIM_SetCompare1 * Description : Sets the TIMx Capture Compare1 Register value * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Compare1: specifies the Capture Compare1 register new value. * Output : None * Return : None *******************************************************************************/ void TIM_SetCompare1(TIM_TypeDef* TIMx, u16 Compare1) { /* Set the Capture Compare1 Register value */ TIMx->CCR1 = Compare1; } /******************************************************************************* * Function Name : TIM_SetCompare2 * Description : Sets the TIMx Capture Compare2 Register value * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Compare2: specifies the Capture Compare2 register new value. * Output : None * Return : None *******************************************************************************/ void TIM_SetCompare2(TIM_TypeDef* TIMx, u16 Compare2) { /* Set the Capture Compare2 Register value */ TIMx->CCR2 = Compare2; } /******************************************************************************* * Function Name : TIM_SetCompare3 * Description : Sets the TIMx Capture Compare3 Register value * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Compare3: specifies the Capture Compare3 register new value. * Output : None * Return : None *******************************************************************************/ void TIM_SetCompare3(TIM_TypeDef* TIMx, u16 Compare3) { /* Set the Capture Compare3 Register value */ TIMx->CCR3 = Compare3; } /******************************************************************************* * Function Name : TIM_SetCompare4 * Description : Sets the TIMx Capture Compare4 Register value * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - Compare4: specifies the Capture Compare4 register new value. * Output : None * Return : None *******************************************************************************/ void TIM_SetCompare4(TIM_TypeDef* TIMx, u16 Compare4) { /* Set the Capture Compare4 Register value */ TIMx->CCR4 = Compare4; } /******************************************************************************* * Function Name : TIM_SetIC1Prescaler * Description : Sets the TIMx Input Capture 1 prescaler. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_IC1Prescaler: specifies the Input Capture1 prescaler * new value. * This parameter can be one of the following values: * - TIM_ICPSC_DIV1: no prescaler * - TIM_ICPSC_DIV2: capture is done once every 2 events * - TIM_ICPSC_DIV4: capture is done once every 4 events * - TIM_ICPSC_DIV8: capture is done once every 8 events * Output : None * Return : None *******************************************************************************/ void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, u16 TIM_IC1Prescaler) { u32 tmpccmr1 = 0; /* Check the parameters */ assert(IS_TIM_IC_PRESCALER(TIM_IC1Prescaler)); tmpccmr1 = TIMx->CCMR1; /* Reset the IC1PSC Bits */ tmpccmr1 &= CCMR_IC13PSC_Mask; /* Set the IC1PSC value */ tmpccmr1 |= TIM_IC1Prescaler; TIMx->CCMR1 = (u16)tmpccmr1; } /******************************************************************************* * Function Name : TIM_SetIC2Prescaler * Description : Sets the TIMx Input Capture 2 prescaler. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_IC2Prescaler: specifies the Input Capture2 prescaler * new value. * This parameter can be one of the following values: * - TIM_ICPSC_DIV1: no prescaler * - TIM_ICPSC_DIV2: capture is done once every 2 events * - TIM_ICPSC_DIV4: capture is done once every 4 events * - TIM_ICPSC_DIV8: capture is done once every 8 events * Output : None * Return : None *******************************************************************************/ void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, u16 TIM_IC2Prescaler) { u32 tmpccmr1 = 0; /* Check the parameters */ assert(IS_TIM_IC_PRESCALER(TIM_IC2Prescaler)); tmpccmr1 = TIMx->CCMR1; /* Reset the IC2PSC Bits */ tmpccmr1 &= CCMR_IC24PSC_Mask; /* Set the IC2PSC value */ tmpccmr1 |= (u16)((u16)TIM_IC2Prescaler << 8); TIMx->CCMR1 = (u16)tmpccmr1; } /******************************************************************************* * Function Name : TIM_SetIC3Prescaler * Description : Sets the TIMx Input Capture 3 prescaler. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_IC3Prescaler: specifies the Input Capture3 prescaler * new value. * This parameter can be one of the following values: * - TIM_ICPSC_DIV1: no prescaler * - TIM_ICPSC_DIV2: capture is done once every 2 events * - TIM_ICPSC_DIV4: capture is done once every 4 events * - TIM_ICPSC_DIV8: capture is done once every 8 events * Output : None * Return : None *******************************************************************************/ void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, u16 TIM_IC3Prescaler) { u32 tmpccmr2 = 0; /* Check the parameters */ assert(IS_TIM_IC_PRESCALER(TIM_IC3Prescaler)); tmpccmr2 = TIMx->CCMR2; /* Reset the IC3PSC Bits */ tmpccmr2 &= CCMR_IC13PSC_Mask; /* Set the IC3PSC value */ tmpccmr2 |= TIM_IC3Prescaler; TIMx->CCMR2 = (u16)tmpccmr2; } /******************************************************************************* * Function Name : TIM_SetIC4Prescaler * Description : Sets the TIMx Input Capture 4 prescaler. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_IC4Prescaler: specifies the Input Capture4 prescaler * new value. * This parameter can be one of the following values: * - TIM_ICPSC_DIV1: no prescaler * - TIM_ICPSC_DIV2: capture is done once every 2 events * - TIM_ICPSC_DIV4: capture is done once every 4 events * - TIM_ICPSC_DIV8: capture is done once every 8 events * Output : None * Return : None *******************************************************************************/ void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, u16 TIM_IC4Prescaler) { u32 tmpccmr2 = 0; /* Check the parameters */ assert(IS_TIM_IC_PRESCALER(TIM_IC4Prescaler)); tmpccmr2 = TIMx->CCMR2; /* Reset the IC4PSC Bits */ tmpccmr2 &= CCMR_IC24PSC_Mask; /* Set the IC4PSC value */ tmpccmr2 |= (u16)((u16)TIM_IC4Prescaler << 8); TIMx->CCMR2 = (u16)tmpccmr2; } /******************************************************************************* * Function Name : TIM_SetClockDivision * Description : Sets the TIMx Clock Division value. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_CKD: specifies the clock division value. * This parameter can be one of the following value: * - TIM_CKD_DIV1: TDTS = Tck_tim * - TIM_CKD_DIV2: TDTS = 2*Tck_tim * - TIM_CKD_DIV4: TDTS = 4*Tck_tim * Output : None * Return : None *******************************************************************************/ void TIM_SetClockDivision(TIM_TypeDef* TIMx, u16 TIM_CKD) { u32 tmpcr1 = 0; /* Check the parameters */ assert(IS_TIM_CKD_DIV(TIM_CKD)); tmpcr1 = TIMx->CR1; /* Reset the CKD Bits */ tmpcr1 &= CR1_CKD_Mask; /* Set the CKD value */ tmpcr1 |= TIM_CKD; TIMx->CR1 = (u16)tmpcr1; } /******************************************************************************* * Function Name : TIM_GetCapture1 * Description : Gets the TIMx Input Capture 1 value. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * Output : None * Return : Capture Compare 1 Register value. *******************************************************************************/ u16 TIM_GetCapture1(TIM_TypeDef* TIMx) { /* Get the Capture 1 Register value */ return TIMx->CCR1; } /******************************************************************************* * Function Name : TIM_GetCapture2 * Description : Gets the TIMx Input Capture 2 value. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * Output : None * Return : Capture Compare 2 Register value. *******************************************************************************/ u16 TIM_GetCapture2(TIM_TypeDef* TIMx) { /* Get the Capture 2 Register value */ return TIMx->CCR2; } /******************************************************************************* * Function Name : TIM_GetCapture3 * Description : Gets the TIMx Input Capture 3 value. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * Output : None * Return : Capture Compare 3 Register value. *******************************************************************************/ u16 TIM_GetCapture3(TIM_TypeDef* TIMx) { /* Get the Capture 3 Register value */ return TIMx->CCR3; } /******************************************************************************* * Function Name : TIM_GetCapture4 * Description : Gets the TIMx Input Capture 4 value. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * Output : None * Return : Capture Compare 4 Register value. *******************************************************************************/ u16 TIM_GetCapture4(TIM_TypeDef* TIMx) { /* Get the Capture 4 Register value */ return TIMx->CCR4; } /******************************************************************************* * Function Name : TIM_GetCounter * Description : Gets the TIMx Counter value. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * Output : None * Return : Counter Register value. *******************************************************************************/ u16 TIM_GetCounter(TIM_TypeDef* TIMx) { /* Get the Counter Register value */ return TIMx->CNT; } /******************************************************************************* * Function Name : TIM_GetPrescaler * Description : Gets the TIMx Prescaler value. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * Output : None * Return : Prescaler Register value. *******************************************************************************/ u16 TIM_GetPrescaler(TIM_TypeDef* TIMx) { /* Get the Prescaler Register value */ return TIMx->PSC; } /******************************************************************************* * Function Name : TIM_GetFlagStatus * Description : Checks whether the specified TIMx flag is set or not. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_FLAG: specifies the flag to check. * This parameter can be one of the following values: * - TIM_FLAG_Update: Timer update Flag * - TIM_FLAG_CC1: Timer Capture Compare 1 Flag * - TIM_FLAG_CC2: Timer Capture Compare 2 Flag * - TIM_FLAG_CC3: Timer Capture Compare 3 Flag * - TIM_FLAG_CC4: Timer Capture Compare 4 Flag * - TIM_FLAG_Trigger: Timer Trigger Flag * - TIM_FLAG_CC1OF: Timer Capture Compare 1 overcapture Flag * - TIM_FLAG_CC2OF: Timer Capture Compare 2 overcapture Flag * - TIM_FLAG_CC3OF: Timer Capture Compare 3 overcapture Flag * - TIM_FLAG_CC4OF: Timer Capture Compare 4 overcapture Flag * Output : None * Return : The new state of TIM_FLAG (SET or RESET). *******************************************************************************/ FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, u16 TIM_FLAG) { FlagStatus bitstatus = RESET; /* Check the parameters */ assert(IS_TIM_GET_FLAG(TIM_FLAG)); if ((TIMx->SR & TIM_FLAG) != (u16)RESET ) { bitstatus = SET; } else { bitstatus = RESET; } return bitstatus; } /******************************************************************************* * Function Name : TIM_ClearFlag * Description : Clears the TIMx's pending flags. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_FLAG: specifies the flag bit to clear. * This parameter can be any combination of the following values: * - TIM_FLAG_Update: Timer update Flag * - TIM_FLAG_CC1: Timer Capture Compare 1 Flag * - TIM_FLAG_CC2: Timer Capture Compare 2 Flag * - TIM_FLAG_CC3: Timer Capture Compare 3 Flag * - TIM_FLAG_CC4: Timer Capture Compare 4 Flag * - TIM_FLAG_Trigger: Timer Trigger Flag * - TIM_FLAG_CC1OF: Timer Capture Compare 1 overcapture Flag * - TIM_FLAG_CC2OF: Timer Capture Compare 2 overcapture Flag * - TIM_FLAG_CC3OF: Timer Capture Compare 3 overcapture Flag * - TIM_FLAG_CC4OF: Timer Capture Compare 4 overcapture Flag * Output : None * Return : None *******************************************************************************/ void TIM_ClearFlag(TIM_TypeDef* TIMx, u16 TIM_FLAG) { /* Check the parameters */ assert(IS_TIM_CLEAR_FLAG(TIM_FLAG)); /* Clear the flags */ TIMx->SR &= (u16)~TIM_FLAG; } /******************************************************************************* * Function Name : TIM_GetITStatus * Description : Checks whether the TIMx interrupt has occurred or not. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_IT: specifies the TIM interrupt source to check. * This parameter can be one of the following values: * - TIM_IT_Update: Timer update Interrupt source * - TIM_IT_CC1: Timer Capture Compare 1 Interrupt source * - TIM_IT_CC2: Timer Capture Compare 2 Interrupt source * - TIM_IT_CC3: Timer Capture Compare 3 Interrupt source * - TIM_IT_CC4: Timer Capture Compare 4 Interrupt source * - TIM_IT_Trigger: Timer Trigger Interrupt source * Output : None * Return : The new state of the TIM_IT(SET or RESET). *******************************************************************************/ ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, u16 TIM_IT) { ITStatus bitstatus = RESET; u16 itstatus = 0x0, itenable = 0x0; /* Check the parameters */ assert(IS_TIM_GET_IT(TIM_IT)); itstatus = TIMx->SR & TIM_IT; itenable = TIMx->DIER & TIM_IT; if ((itstatus != (u16)RESET) && (itenable != (u16)RESET)) { bitstatus = SET; } else { bitstatus = RESET; } return bitstatus; } /******************************************************************************* * Function Name : TIM_ClearITPendingBit * Description : Clears the TIMx's interrupt pending bits. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_IT: specifies the pending bit to clear. * This parameter can be any combination of the following values: * - TIM_IT_Update: Timer update Interrupt source * - TIM_IT_CC1: Timer Capture Compare 1 Interrupt source * - TIM_IT_CC2: Timer Capture Compare 2 Interrupt source * - TIM_IT_CC3: Timer Capture Compare 3 Interrupt source * - TIM_IT_CC4: Timer Capture Compare 4 Interrupt source * - TIM_IT_Trigger: Timer Trigger Interrupt source * Output : None * Return : None *******************************************************************************/ void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, u16 TIM_IT) { /* Check the parameters */ assert(IS_TIM_IT(TIM_IT)); /* Clear the IT pending Bit */ TIMx->SR &= (u16)~TIM_IT; } /******************************************************************************* * Function Name : PWMInput_Config * Description : Configures the TIM peripheral according to the specified * parameters in the TIM_ICInitStruct to measure an external PWM * signal. * Input : - TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure * that contains the configuration information for the specified * TIM peripheral. * Output : None * Return : None *******************************************************************************/ static void PWMI_Config(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) { u8 ICPolarity = TIM_ICPolarity_Rising; u8 ICSelection = TIM_ICSelection_DirectTI; /* Select the Opposite Input Polarity */ if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) { ICPolarity = TIM_ICPolarity_Falling; } else { ICPolarity = TIM_ICPolarity_Rising; } /* Select the Opposite Input */ if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) { ICSelection = TIM_ICSelection_IndirectTI; } else { ICSelection = TIM_ICSelection_DirectTI; } if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) { /* TI1 Configuration */ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, TIM_ICInitStruct->TIM_ICFilter); /* Set the Input Capture Prescaler value */ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); /* TI2 Configuration */ TI2_Config(TIMx, ICPolarity, ICSelection, TIM_ICInitStruct->TIM_ICFilter); /* Set the Input Capture Prescaler value */ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); } else { /* TI1 Configuration */ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, TIM_ICInitStruct->TIM_ICFilter); /* Set the Input Capture Prescaler value */ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); /* TI2 Configuration */ TI1_Config(TIMx, ICPolarity, ICSelection, TIM_ICInitStruct->TIM_ICFilter); /* Set the Input Capture Prescaler value */ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); } } /******************************************************************************* * Function Name : TI1_Config * Description : Configure the TI1 as Input. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ICPolarity : The Input Polarity. * This parameter can be one of the following values: * - TIM_ICPolarity_Rising * - TIM_ICPolarity_Falling * - TIM_ICSelection: specifies the input to be used. * This parameter can be one of the following values: * - TIM_ICSelection_DirectTI: TIM Input 1 is selected to * be connected to IC1. * - TIM_ICSelection_IndirectTI: TIM Input 1 is selected to * be connected to IC2. * - TIM_ICSelection_TRGI: TIM Input 1 is selected to be * connected to TRGI. * - TIM_ICFilter: Specifies the Input Capture Filter. * This parameter must be a value between 0x00 and 0x0F. * Output : None * Return : None *******************************************************************************/ static void TI1_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, u8 TIM_ICFilter) { u32 tmpccmr1 = 0, tmpccer = 0; tmpccmr1 = TIMx->CCMR1; tmpccer = TIMx->CCER; /* Disable the Channel 1: Reset the CCE Bit */ TIMx->CCER &= CCRE_CC1E_Reset; /* Select the Input and set the filter */ tmpccmr1 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask; tmpccmr1 |= TIM_ICSelection | (u16)((u16)TIM_ICFilter << 4); /* Select the Polarity and set the CCE Bit */ tmpccer &= CCER_CC1P_Mask & CCRE_CC1E_Mask; tmpccer |= TIM_ICPolarity | CCRE_CC1E_Set; TIMx->CCMR1 = 0x0000; TIMx->CCMR1 = (u16)tmpccmr1; TIMx->CCER = (u16)tmpccer; } /******************************************************************************* * Function Name : TI2_Config * Description : Configure the TI2 as Input. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ICPolarity : The Input Polarity. * This parameter can be one of the following values: * - TIM_ICPolarity_Rising * - TIM_ICPolarity_Falling * - TIM_ICSelection: specifies the input to be used. * This parameter can be one of the following values: * - TIM_ICSelection_DirectTI: TIM Input 2 is selected to * be connected to IC2. * - TIM_ICSelection_IndirectTI: TIM Input 2 is selected to * be connected to IC1. * - TIM_ICSelection_TRGI: TIM Input 2 is selected to be * connected to TRGI. * - TIM_ICFilter: Specifies the Input Capture Filter. * This parameter must be a value between 0x00 and 0x0F. * Output : None * Return : None *******************************************************************************/ static void TI2_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, u8 TIM_ICFilter) { u32 tmpccmr1 = 0, tmpccer = 0, tmp = 0; tmpccmr1 = TIMx->CCMR1; tmpccer = TIMx->CCER; tmp = (u16)((u16)TIM_ICPolarity << 4); /* Disable the Channel 2: Reset the CCE Bit */ TIMx->CCER &= CCRE_CC2E_Reset; /* Select the Input and set the filter */ tmpccmr1 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask; tmpccmr1 |= (u16)((u16)TIM_ICFilter << 12); tmpccmr1 |= (u16)((u16)TIM_ICSelection << 8); /* Select the Polarity and set the CCE Bit */ tmpccer &= CCER_CC2P_Mask & CCRE_CC2E_Mask; tmpccer |= tmp | CCRE_CC2E_Set; TIMx->CCMR1 = (u16)tmpccmr1 ; TIMx->CCER = (u16)tmpccer; } /******************************************************************************* * Function Name : TI3_Config * Description : Configure the TI3 as Input. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ICPolarity : The Input Polarity. * This parameter can be one of the following values: * - TIM_ICPolarity_Rising * - TIM_ICPolarity_Falling * - TIM_ICSelection: specifies the input to be used. * This parameter can be one of the following values: * - TIM_ICSelection_DirectTI: TIM Input 3 is selected to * be connected to IC3. * - TIM_ICSelection_IndirectTI: TIM Input 3 is selected to * be connected to IC4. * - TIM_ICSelection_TRGI: TIM Input 3 is selected to be * connected to TRGI. * - TIM_ICFilter: Specifies the Input Capture Filter. * This parameter must be a value between 0x00 and 0x0F. * Output : None * Return : None *******************************************************************************/ static void TI3_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, u8 TIM_ICFilter) { u32 tmpccmr2 = 0, tmpccer = 0, tmp = 0; tmpccmr2 = TIMx->CCMR2; tmpccer = TIMx->CCER; tmp = (u16)((u16)TIM_ICPolarity << 8); /* Disable the Channel 3: Reset the CCE Bit */ TIMx->CCER &= CCRE_CC3E_Reset; /* Select the Input and set the filter */ tmpccmr2 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask; tmpccmr2 |= TIM_ICSelection | (u16)((u16)TIM_ICFilter << 4); /* Select the Polarity and set the CCE Bit */ tmpccer &= CCER_CC1P_Mask & CCRE_CC1E_Mask; tmpccer |= tmp | CCRE_CC3E_Set; TIMx->CCMR2 = (u16)tmpccmr2; TIMx->CCER = (u16)tmpccer; } /******************************************************************************* * Function Name : TI4_Config * Description : Configure the TI1 as Input. * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ICPolarity : The Input Polarity. * This parameter can be one of the following values: * - TIM_ICPolarity_Rising * - TIM_ICPolarity_Falling * - TIM_ICSelection: specifies the input to be used. * This parameter can be one of the following values: * - TIM_ICSelection_DirectTI: TIM Input 4 is selected to * be connected to IC4. * - TIM_ICSelection_IndirectTI: TIM Input 4 is selected to * be connected to IC3. * - TIM_ICSelection_TRGI: TIM Input 4 is selected to be * connected to TRGI. * - TIM_ICFilter: Specifies the Input Capture Filter. * This parameter must be a value between 0x00 and 0x0F. * Output : None * Return : None *******************************************************************************/ static void TI4_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, u8 TIM_ICFilter) { u32 tmpccmr2 = 0, tmpccer = 0, tmp = 0; tmpccmr2 = TIMx->CCMR2; tmpccer = TIMx->CCER; tmp = (u16)((u16)TIM_ICPolarity << 12); /* Disable the Channel 4: Reset the CCE Bit */ TIMx->CCER &= CCRE_CC4E_Reset; /* Select the Input and set the filter */ tmpccmr2 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask; tmpccmr2 |= (u16)((u16)TIM_ICSelection << 8) | (u16)((u16)TIM_ICFilter << 12); /* Select the Polarity and set the CCE Bit */ tmpccer &= CCER_CC4P_Mask & CCRE_CC4E_Mask; tmpccer |= tmp | CCRE_CC4E_Set; TIMx->CCMR2 = (u16)tmpccmr2; TIMx->CCER = (u16)tmpccer ; } /******************************************************************************* * Function Name : ETR_Config * Description : Configure the External Trigger * Input : - TIMx: where x can be 2, 3 or 4 to select the TIM peripheral. * - TIM_ExtTRGPrescaler: The external Trigger Prescaler. * This parameter can be one of the following values: * - TIM_ExtTRGPSC_OFF * - TIM_ExtTRGPSC_DIV2 * - TIM_ExtTRGPSC_DIV4 * - TIM_ExtTRGPSC_DIV8 * - TIM_ExtTRGPolarity: The external Trigger Polarity. * This parameter can be one of the following values: * - TIM_ExtTRGPolarity_Inverted * - TIM_ExtTRGPolarity_NonInverted * - ExtTRGFilter: External Trigger Filter. * This parameter must be a value between 0x00 and 0x0F. * Output : None * Return : None *******************************************************************************/ static void ETR_Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, u8 ExtTRGFilter) { u32 tmpsmcr = 0; tmpsmcr = TIMx->SMCR; /* Set the Prescaler, the Filter value and the Polarity */ tmpsmcr &= SMCR_ETR_Mask; tmpsmcr |= TIM_ExtTRGPrescaler | TIM_ExtTRGPolarity | (u16)((u16)ExtTRGFilter << 8); TIMx->SMCR = (u16)tmpsmcr; } /******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/
Go to most recent revision | Compare with Previous | Blame | View Log