URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [Common/] [ethernet/] [lwIP/] [netif/] [ethernetif.c] - Rev 867
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Copyright (c) 2001-2004 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels <adam@sics.se> * */ /* * This file is a skeleton for developing Ethernet network interface * drivers for lwIP. Add code to the low_level functions and do a * search-and-replace for the word "ethernetif" to replace it with * something that better describes your network interface. */ #include "lwip/opt.h" #include "lwip/def.h" #include "lwip/mem.h" #include "lwip/pbuf.h" #include "lwip/sys.h" #include <lwip/stats.h> #include "netif/etharp.h" /* Define those to better describe your network interface. */ #define IFNAME0 'e' #define IFNAME1 'n' struct ethernetif { struct eth_addr *ethaddr; /* Add whatever per-interface state that is needed here. */ }; static const struct eth_addr ethbroadcast = {{0xff,0xff,0xff,0xff,0xff,0xff}}; /* Forward declarations. */ static void ethernetif_input(struct netif *netif); static err_t ethernetif_output(struct netif *netif, struct pbuf *p, struct ip_addr *ipaddr); static void low_level_init(struct netif *netif) { struct ethernetif *ethernetif = netif->state; /* set MAC hardware address length */ netif->hwaddr_len = 6; /* set MAC hardware address */ netif->hwaddr[0] = ; ... netif->hwaddr[5] = ; /* maximum transfer unit */ netif->mtu = 1500; /* broadcast capability */ netif->flags = NETIF_FLAG_BROADCAST; /* Do whatever else is needed to initialize interface. */ } /* * low_level_output(): * * Should do the actual transmission of the packet. The packet is * contained in the pbuf that is passed to the function. This pbuf * might be chained. * */ static err_t low_level_output(struct netif *netif, struct pbuf *p) { struct ethernetif *ethernetif = netif->state; struct pbuf *q; initiate transfer(); #if ETH_PAD_SIZE pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ #endif for(q = p; q != NULL; q = q->next) { /* Send the data from the pbuf to the interface, one pbuf at a time. The size of the data in each pbuf is kept in the ->len variable. */ send data from(q->payload, q->len); } signal that packet should be sent(); #if ETH_PAD_SIZE pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ #endif #if LINK_STATS lwip_stats.link.xmit++; #endif /* LINK_STATS */ return ERR_OK; } /* * low_level_input(): * * Should allocate a pbuf and transfer the bytes of the incoming * packet from the interface into the pbuf. * */ static struct pbuf * low_level_input(struct netif *netif) { struct ethernetif *ethernetif = netif->state; struct pbuf *p, *q; u16_t len; /* Obtain the size of the packet and put it into the "len" variable. */ len = ; #if ETH_PAD_SIZE len += ETH_PAD_SIZE; /* allow room for Ethernet padding */ #endif /* We allocate a pbuf chain of pbufs from the pool. */ p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL); if (p != NULL) { #if ETH_PAD_SIZE pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ #endif /* We iterate over the pbuf chain until we have read the entire * packet into the pbuf. */ for(q = p; q != NULL; q = q->next) { /* Read enough bytes to fill this pbuf in the chain. The * available data in the pbuf is given by the q->len * variable. */ read data into(q->payload, q->len); } acknowledge that packet has been read(); #if ETH_PAD_SIZE pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ #endif #if LINK_STATS lwip_stats.link.recv++; #endif /* LINK_STATS */ } else { drop packet(); #if LINK_STATS lwip_stats.link.memerr++; lwip_stats.link.drop++; #endif /* LINK_STATS */ } return p; } /* * ethernetif_output(): * * This function is called by the TCP/IP stack when an IP packet * should be sent. It calls the function called low_level_output() to * do the actual transmission of the packet. * */ static err_t ethernetif_output(struct netif *netif, struct pbuf *p, struct ip_addr *ipaddr) { /* resolve hardware address, then send (or queue) packet */ return etharp_output(netif, ipaddr, p); } /* * ethernetif_input(): * * This function should be called when a packet is ready to be read * from the interface. It uses the function low_level_input() that * should handle the actual reception of bytes from the network * interface. * */ static void ethernetif_input(struct netif *netif) { struct ethernetif *ethernetif; struct eth_hdr *ethhdr; struct pbuf *p; ethernetif = netif->state; /* move received packet into a new pbuf */ p = low_level_input(netif); /* no packet could be read, silently ignore this */ if (p == NULL) return; /* points to packet payload, which starts with an Ethernet header */ ethhdr = p->payload; #if LINK_STATS lwip_stats.link.recv++; #endif /* LINK_STATS */ ethhdr = p->payload; switch (htons(ethhdr->type)) { /* IP packet? */ case ETHTYPE_IP: #if 0 /* CSi disabled ARP table update on ingress IP packets. This seems to work but needs thorough testing. */ /* update ARP table */ etharp_ip_input(netif, p); #endif /* skip Ethernet header */ pbuf_header(p, -sizeof(struct eth_hdr)); /* pass to network layer */ netif->input(p, netif); break; case ETHTYPE_ARP: /* pass p to ARP module */ etharp_arp_input(netif, ethernetif->ethaddr, p); break; default: pbuf_free(p); p = NULL; break; } } static void arp_timer(void *arg) { etharp_tmr(); sys_timeout(ARP_TMR_INTERVAL, arp_timer, NULL); } /* * ethernetif_init(): * * Should be called at the beginning of the program to set up the * network interface. It calls the function low_level_init() to do the * actual setup of the hardware. * */ err_t ethernetif_init(struct netif *netif) { struct ethernetif *ethernetif; ethernetif = mem_malloc(sizeof(struct ethernetif)); if (ethernetif == NULL) { LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_init: out of memory\n")); return ERR_MEM; } #if LWIP_SNMP /* ifType ethernetCsmacd(6) @see RFC1213 */ netif->link_type = 6; /* your link speed here */ netif->link_speed = ; netif->ts = 0; netif->ifinoctets = 0; netif->ifinucastpkts = 0; netif->ifinnucastpkts = 0; netif->ifindiscards = 0; netif->ifoutoctets = 0; netif->ifoutucastpkts = 0; netif->ifoutnucastpkts = 0; netif->ifoutdiscards = 0; #endif netif->state = ethernetif; netif->name[0] = IFNAME0; netif->name[1] = IFNAME1; netif->output = ethernetif_output; netif->linkoutput = low_level_output; ethernetif->ethaddr = (struct eth_addr *)&(netif->hwaddr[0]); low_level_init(netif); etharp_init(); sys_timeout(ARP_TMR_INTERVAL, arp_timer, NULL); return ERR_OK; }
Go to most recent revision | Compare with Previous | Blame | View Log