URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [Common/] [ethernet/] [lwIP_130/] [src/] [core/] [raw.c] - Rev 609
Go to most recent revision | Compare with Previous | Blame | View Log
/** * @file * Implementation of raw protocol PCBs for low-level handling of * different types of protocols besides (or overriding) those * already available in lwIP. * */ /* * Copyright (c) 2001-2004 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels <adam@sics.se> * */ #include "lwip/opt.h" #if LWIP_RAW /* don't build if not configured for use in lwipopts.h */ #include "lwip/def.h" #include "lwip/memp.h" #include "lwip/inet.h" #include "lwip/ip_addr.h" #include "lwip/netif.h" #include "lwip/raw.h" #include "lwip/stats.h" #include "lwip/snmp.h" #include "arch/perf.h" #include <string.h> /** The list of RAW PCBs */ static struct raw_pcb *raw_pcbs; /** * Determine if in incoming IP packet is covered by a RAW PCB * and if so, pass it to a user-provided receive callback function. * * Given an incoming IP datagram (as a chain of pbufs) this function * finds a corresponding RAW PCB and calls the corresponding receive * callback function. * * @param p pbuf to be demultiplexed to a RAW PCB. * @param inp network interface on which the datagram was received. * @return - 1 if the packet has been eaten by a RAW PCB receive * callback function. The caller MAY NOT not reference the * packet any longer, and MAY NOT call pbuf_free(). * @return - 0 if packet is not eaten (pbuf is still referenced by the * caller). * */ u8_t raw_input(struct pbuf *p, struct netif *inp) { struct raw_pcb *pcb, *prev; struct ip_hdr *iphdr; s16_t proto; u8_t eaten = 0; LWIP_UNUSED_ARG(inp); iphdr = p->payload; proto = IPH_PROTO(iphdr); prev = NULL; pcb = raw_pcbs; /* loop through all raw pcbs until the packet is eaten by one */ /* this allows multiple pcbs to match against the packet by design */ while ((eaten == 0) && (pcb != NULL)) { if (pcb->protocol == proto) { /* receive callback function available? */ if (pcb->recv != NULL) { /* the receive callback function did not eat the packet? */ if (pcb->recv(pcb->recv_arg, pcb, p, &(iphdr->src)) != 0) { /* receive function ate the packet */ p = NULL; eaten = 1; if (prev != NULL) { /* move the pcb to the front of raw_pcbs so that is found faster next time */ prev->next = pcb->next; pcb->next = raw_pcbs; raw_pcbs = pcb; } } } /* no receive callback function was set for this raw PCB */ /* drop the packet */ } prev = pcb; pcb = pcb->next; } return eaten; } /** * Bind a RAW PCB. * * @param pcb RAW PCB to be bound with a local address ipaddr. * @param ipaddr local IP address to bind with. Use IP_ADDR_ANY to * bind to all local interfaces. * * @return lwIP error code. * - ERR_OK. Successful. No error occured. * - ERR_USE. The specified IP address is already bound to by * another RAW PCB. * * @see raw_disconnect() */ err_t raw_bind(struct raw_pcb *pcb, struct ip_addr *ipaddr) { ip_addr_set(&pcb->local_ip, ipaddr); return ERR_OK; } /** * Connect an RAW PCB. This function is required by upper layers * of lwip. Using the raw api you could use raw_sendto() instead * * This will associate the RAW PCB with the remote address. * * @param pcb RAW PCB to be connected with remote address ipaddr and port. * @param ipaddr remote IP address to connect with. * * @return lwIP error code * * @see raw_disconnect() and raw_sendto() */ err_t raw_connect(struct raw_pcb *pcb, struct ip_addr *ipaddr) { ip_addr_set(&pcb->remote_ip, ipaddr); return ERR_OK; } /** * Set the callback function for received packets that match the * raw PCB's protocol and binding. * * The callback function MUST either * - eat the packet by calling pbuf_free() and returning non-zero. The * packet will not be passed to other raw PCBs or other protocol layers. * - not free the packet, and return zero. The packet will be matched * against further PCBs and/or forwarded to another protocol layers. * * @return non-zero if the packet was free()d, zero if the packet remains * available for others. */ void raw_recv(struct raw_pcb *pcb, u8_t (* recv)(void *arg, struct raw_pcb *upcb, struct pbuf *p, struct ip_addr *addr), void *recv_arg) { /* remember recv() callback and user data */ pcb->recv = recv; pcb->recv_arg = recv_arg; } /** * Send the raw IP packet to the given address. Note that actually you cannot * modify the IP headers (this is inconsistent with the receive callback where * you actually get the IP headers), you can only specify the IP payload here. * It requires some more changes in lwIP. (there will be a raw_send() function * then.) * * @param pcb the raw pcb which to send * @param p the IP payload to send * @param ipaddr the destination address of the IP packet * */ err_t raw_sendto(struct raw_pcb *pcb, struct pbuf *p, struct ip_addr *ipaddr) { err_t err; struct netif *netif; struct ip_addr *src_ip; struct pbuf *q; /* q will be sent down the stack */ LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_TRACE | 3, ("raw_sendto\n")); /* not enough space to add an IP header to first pbuf in given p chain? */ if (pbuf_header(p, IP_HLEN)) { /* allocate header in new pbuf */ q = pbuf_alloc(PBUF_IP, 0, PBUF_RAM); /* new header pbuf could not be allocated? */ if (q == NULL) { LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_TRACE | 2, ("raw_sendto: could not allocate header\n")); return ERR_MEM; } /* chain header q in front of given pbuf p */ pbuf_chain(q, p); /* { first pbuf q points to header pbuf } */ LWIP_DEBUGF(RAW_DEBUG, ("raw_sendto: added header pbuf %p before given pbuf %p\n", (void *)q, (void *)p)); } else { /* first pbuf q equals given pbuf */ q = p; if(pbuf_header(q, -IP_HLEN)) { LWIP_ASSERT("Can't restore header we just removed!", 0); return ERR_MEM; } } if ((netif = ip_route(ipaddr)) == NULL) { LWIP_DEBUGF(RAW_DEBUG | 1, ("raw_sendto: No route to 0x%"X32_F"\n", ipaddr->addr)); /* free any temporary header pbuf allocated by pbuf_header() */ if (q != p) { pbuf_free(q); } return ERR_RTE; } if (ip_addr_isany(&pcb->local_ip)) { /* use outgoing network interface IP address as source address */ src_ip = &(netif->ip_addr); } else { /* use RAW PCB local IP address as source address */ src_ip = &(pcb->local_ip); } #if LWIP_NETIF_HWADDRHINT netif->addr_hint = &(pcb->addr_hint); #endif /* LWIP_NETIF_HWADDRHINT*/ err = ip_output_if (q, src_ip, ipaddr, pcb->ttl, pcb->tos, pcb->protocol, netif); #if LWIP_NETIF_HWADDRHINT netif->addr_hint = NULL; #endif /* LWIP_NETIF_HWADDRHINT*/ /* did we chain a header earlier? */ if (q != p) { /* free the header */ pbuf_free(q); } return err; } /** * Send the raw IP packet to the address given by raw_connect() * * @param pcb the raw pcb which to send * @param p the IP payload to send * */ err_t raw_send(struct raw_pcb *pcb, struct pbuf *p) { return raw_sendto(pcb, p, &pcb->remote_ip); } /** * Remove an RAW PCB. * * @param pcb RAW PCB to be removed. The PCB is removed from the list of * RAW PCB's and the data structure is freed from memory. * * @see raw_new() */ void raw_remove(struct raw_pcb *pcb) { struct raw_pcb *pcb2; /* pcb to be removed is first in list? */ if (raw_pcbs == pcb) { /* make list start at 2nd pcb */ raw_pcbs = raw_pcbs->next; /* pcb not 1st in list */ } else { for(pcb2 = raw_pcbs; pcb2 != NULL; pcb2 = pcb2->next) { /* find pcb in raw_pcbs list */ if (pcb2->next != NULL && pcb2->next == pcb) { /* remove pcb from list */ pcb2->next = pcb->next; } } } memp_free(MEMP_RAW_PCB, pcb); } /** * Create a RAW PCB. * * @return The RAW PCB which was created. NULL if the PCB data structure * could not be allocated. * * @param proto the protocol number of the IPs payload (e.g. IP_PROTO_ICMP) * * @see raw_remove() */ struct raw_pcb * raw_new(u8_t proto) { struct raw_pcb *pcb; LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_TRACE | 3, ("raw_new\n")); pcb = memp_malloc(MEMP_RAW_PCB); /* could allocate RAW PCB? */ if (pcb != NULL) { /* initialize PCB to all zeroes */ memset(pcb, 0, sizeof(struct raw_pcb)); pcb->protocol = proto; pcb->ttl = RAW_TTL; pcb->next = raw_pcbs; raw_pcbs = pcb; } return pcb; } #endif /* LWIP_RAW */
Go to most recent revision | Compare with Previous | Blame | View Log