OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [HCS12_CodeWarrior_banked/] [P&E_ICD.ini] - Rev 600

Go to most recent revision | Compare with Previous | Blame | View Log

[Environment Variables]
GENPATH={Compiler}lib\HC12c\src;{Compiler}lib\HC12c\include;{Compiler}lib\HC12c\lib
LIBPATH={Compiler}lib\HC12c\include
OBJPATH={Project}bin
TEXTPATH={Project}bin
ABSPATH={Project}bin

[HI-WAVE]
Target=icd12
Layout=C_layout.hwl
LoadDialogOptions=AUTOERASEANDFLASH 
CPU=HC12
MainFrame=2,3,-1,-1,-1,-1,54,54,1254,908
TOOLBAR=57600 57601 32795 0 57635 57634 57637 0 57671 57669 0 32777 32776 32782 32780 32781 32778 0 32806
AEFWarningDialog=FALSE

[ICD12]
CMDFILE0=CMDFILE STARTUP ON ".\cmd\p&e_icd_startup.cmd"
CMDFILE1=CMDFILE RESET ON ".\cmd\p&e_icd_reset.cmd"
CMDFILE2=CMDFILE PRELOAD ON ".\cmd\p&e_icd_preload.cmd"
CMDFILE3=CMDFILE POSTLOAD ON ".\cmd\p&e_icd_postload.cmd"
CMDFILE4=CMDFILE VPPON ON ".\cmd\p&e_icd_vppon.cmd"
CMDFILE5=CMDFILE VPPOFF ON ".\cmd\p&e_icd_vppoff.cmd"
CMDFILE6=CMDFILE UNSECURE ON ".\cmd\P&E_ICD_erase_unsecure_hcs12.cmd"
MCUID=0x3C6
CHIPSECURE=CHIPSECURE SETUP 0xFF0F 0x3 0x2
BDMClockSpeed=14
BNKA_MCUID03C6_BANKWINDOW0=BANKWINDOW PPAGE ON 0x8000..0xBFFF 0x30 16 0x30
BNKA_MCUID03C6_BANKWINDOW1=BANKWINDOW DPAGE OFF 0x7000..0x7FFF 0x34 256 0x0
BNKA_MCUID03C6_BANKWINDOW2=BANKWINDOW EPAGE OFF 0x400..0x7FF 0x36 256 0x0
HWBPD_MCUID03C6_HWBPM0=HWBPM MODE AUTOMATIC BPM22BITS 0x28 SKIP_OFF
HWBPD_MCUID03C6_BKPT_REMAP0=HWBPM REMAP_22BITS RANGE 0x4000 0x7FFF 0x3E
HWBPD_MCUID03C6_BKPT_REMAP1=HWBPM REMAP_22BITS RANGE 0xC000 0xFFFF 0x3F
HWBPD_MCUID03C6_HWBPM1=HWBPM SET16BITS 0x0 0x0 0x0 0x0
HWBPD_MCUID03C6_HWBPM2=HWBPM SET22BITS 0x0 0x0 0x0 0x0
BDMAutoSpeed=0
COMDEVICE=SETCOMM COMPORT USB "USB-PE5014402"
SETCLKSW=1
DETECTRUNNING=0
ISRDISABLEDSTEP=0
SHOWPROT=1
NV_PARAMETER_FILE=C:\devtools\Metrowerks\CodeWarrior CW12_V3.1\prog\FPP\mcu03C6.fpp
NV_SAVE_WSP=0
NV_AUTO_ID=1
DMM_MCUID03C6_MODULE0=Registers 0x0 0x400 1 4 0 2 1 1
DMM_MCUID03C6_MODULE1=Ram 0x1000 0x3000 2 5 0 3 1 1
DMM_MCUID03C6_MODULE2=Eeprom 0x0 0x1000 3 5 1 4 1 1
HOTPLUGGING=0
REALTIMEHWBP=0
NOREADWHILERUNNING=0
RESYNCONCOPRESET=0

[Recent Applications File List]
File1=E:\Dev\FreeRTOS\Demo\HCS12_CodeWarrior_banked\bin\P&E_ICD.abs
File2=E:\Dev\FreeRTOS\Demo\MC9S12DP256_CodeWarrior\bin\P&E_ICD.abs
File3=
File4=
LoadFlags1=4099
LoadFlags2=4099
LoadFlags3=0
LoadFlags4=0

[Recent Layout File List]
File1=C_layout.hwl
File2=
File3=
File4=

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.