URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [MB96350_Softune_Dice_Kit/] [FreeRTOSConfig.h] - Rev 797
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ #ifndef FREERTOS_CONFIG_H #define FREERTOS_CONFIG_H #include "mb96356rs.h" /* * The below define should be same as the option selected by the Memory * Model (Project->Setup Project->C Compiler->Category->Target Depend ) * * Valid settings here include: * ------- Memory models --------- Data Code * portSMALL 16 Bit 16 Bit * portMEDIUM 16 Bit 24 Bit * portCOMPACT 24 Bit 16 Bit * portLARGE 24 Bit 24 Bit */ #define configMEMMODEL portMEDIUM /* Demo specific definition - set this to 1 if you want to include the task that writes trace and debug information to the UART. If it is set to 0 then the ComTest tasks will be included in place of the trace task. */ #define INCLUDE_TraceListTasks 0 /*----------------------------------------------------------- * Application specific definitions. * * These definitions should be adjusted for your particular hardware and * application requirements. * * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. *----------------------------------------------------------*/ #define configUSE_PREEMPTION 1 #define configUSE_IDLE_HOOK 0 #define configUSE_TICK_HOOK 0 #define configMINIMAL_STACK_SIZE ( ( unsigned short ) 180 ) /* This can be greatly reduced when using the small or medium memory model. */ #define configCPU_CLOCK_HZ ( ( unsigned long ) 56000000 ) /* Clock setup from start.asm in the demo application. */ #define configCLKP1_CLOCK_HZ ( ( unsigned long ) 56000000 ) /* Clock setup from start.asm in the demo application. */ #define configTICK_RATE_HZ ( (portTickType) 1000 ) #define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 6 ) #define configTOTAL_HEAP_SIZE ( (size_t) (5000) ) #define configMAX_TASK_NAME_LEN ( 20 ) #define configUSE_16_BIT_TICKS 1 #define configIDLE_SHOULD_YIELD 1 #define configUSE_MUTEXES 1 #define configUSE_TRACE_FACILITY 0 #define configCHECK_FOR_STACK_OVERFLOW 0 /* Co-routine definitions. */ #define configUSE_CO_ROUTINES 1 #define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) /* Set the following definitions to 1 to include the API function, or zero to exclude the API function. */ #define INCLUDE_vTaskPrioritySet 0 #define INCLUDE_uxTaskPriorityGet 0 #define INCLUDE_vTaskDelete 0 #define INCLUDE_vTaskCleanUpResources 0 #define INCLUDE_vTaskSuspend 1 #define INCLUDE_vResumeFromISR 0 #define INCLUDE_vTaskDelayUntil 1 #define INCLUDE_vTaskDelay 1 #define INCLUDE_xTaskGetSchedulerState 0 #define INCLUDE_xTaskGetCurrentTaskHandle 0 #define configKERNEL_INTERRUPT_PRIORITY 6 /* Passed into the Dice tasks to let then know if they are controlling the display on the left side or the right side. */ #define configLEFT_DISPLAY 0 #define configRIGHT_DISPLAY 1 #endif /* FREERTOS_CONFIG_H */
Go to most recent revision | Compare with Previous | Blame | View Log