URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [RX600_RX62N-RDK_IAR/] [HighFrequencyTimerTest.c] - Rev 604
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /* * High frequency timer test as described in main.c. */ /* Scheduler includes. */ #include "FreeRTOS.h" /* Hardware specifics. */ #include <iorx62n.h> /* The set frequency of the interrupt. Deviations from this are measured as the jitter. */ #define timerINTERRUPT_FREQUENCY ( 20000UL ) /* The expected time between each of the timer interrupts - if the jitter was zero. */ #define timerEXPECTED_DIFFERENCE_VALUE ( ( unsigned short ) ( ( configPERIPHERAL_CLOCK_HZ / 8UL ) / timerINTERRUPT_FREQUENCY ) ) /* The highest available interrupt priority. */ #define timerHIGHEST_PRIORITY ( 15 ) /* Misc defines. */ #define timerTIMER_3_COUNT_VALUE ( *( ( unsigned short * ) 0x8801a ) ) /*( CMT3.CMCNT )*/ /*-----------------------------------------------------------*/ /* Interrupt handler in which the jitter is measured. */ __interrupt void vTimer2IntHandler( void ); /* Stores the value of the maximum recorded jitter between interrupts. */ volatile unsigned short usMaxJitter = 0; /* Counts the number of high frequency interrupts - used to generate the run time stats. */ volatile unsigned long ulHighFrequencyTickCount = 0UL; /*-----------------------------------------------------------*/ void vSetupHighFrequencyTimer( void ) { /* Timer CMT2 is used to generate the interrupts, and CMT3 is used to measure the jitter. */ /* Enable compare match timer 2 and 3. */ MSTP( CMT2 ) = 0; MSTP( CMT3 ) = 0; /* Interrupt on compare match. */ CMT2.CMCR.BIT.CMIE = 1; /* Set the compare match value. */ CMT2.CMCOR = ( unsigned short ) ( ( ( configPERIPHERAL_CLOCK_HZ / timerINTERRUPT_FREQUENCY ) -1 ) / 8 ); /* Divide the PCLK by 8. */ CMT2.CMCR.BIT.CKS = 0; CMT3.CMCR.BIT.CKS = 0; /* Enable the interrupt... */ _IEN( _CMT2_CMI2 ) = 1; /* ...and set its priority to the maximum possible, this is above the priority set by configMAX_SYSCALL_INTERRUPT_PRIORITY so will nest. */ _IPR( _CMT2_CMI2 ) = timerHIGHEST_PRIORITY; /* Start the timers. */ CMT.CMSTR1.BIT.STR2 = 1; CMT.CMSTR1.BIT.STR3 = 1; } /*-----------------------------------------------------------*/ #pragma vector = VECT_CMT2_CMI2 __interrupt void vTimer2IntHandler( void ) { volatile unsigned short usCurrentCount; static unsigned short usMaxCount = 0; static unsigned long ulErrorCount = 0UL; /* We use the timer 1 counter value to measure the clock cycles between the timer 0 interrupts. First stop the clock. */ CMT.CMSTR1.BIT.STR3 = 0; portNOP(); portNOP(); usCurrentCount = timerTIMER_3_COUNT_VALUE; /* Is this the largest count we have measured yet? */ if( usCurrentCount > usMaxCount ) { if( usCurrentCount > timerEXPECTED_DIFFERENCE_VALUE ) { usMaxJitter = usCurrentCount - timerEXPECTED_DIFFERENCE_VALUE; } else { /* This should not happen! */ ulErrorCount++; } usMaxCount = usCurrentCount; } /* Used to generate the run time stats. */ ulHighFrequencyTickCount++; /* Clear the timer. */ timerTIMER_3_COUNT_VALUE = 0; /* Then start the clock again. */ CMT.CMSTR1.BIT.STR3 = 1; }
Go to most recent revision | Compare with Previous | Blame | View Log