OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [RX600_RX62N-RDK_IAR/] [RTOSDemo.ewp] - Rev 797

Go to most recent revision | Compare with Previous | Blame | View Log 

<?xml version="1.0" encoding="iso-8859-1"?>

<project>
  <fileVersion>2</fileVersion>
  <configuration>
    <name>Debug</name>
    <toolchain>
      <name>RX</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>General</name>
      <archiveVersion>2</archiveVersion>
      <data>
        <version>3</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>OGChipSelectMenu</name>
          <state>R5F562N8       R5F562N8</state>
        </option>
        <option>
          <name>GenDoubleSize</name>
          <state>0</state>
        </option>
        <option>
          <name>GenCodeModel</name>
          <state>0</state>
        </option>
        <option>
          <name>GenDataModel</name>
          <state>1</state>
        </option>
        <option>
          <name>GenByteOrder</name>
          <state>0</state>
        </option>
        <option>
          <name>GOutputBinary</name>
          <state>0</state>
        </option>
        <option>
          <name>ExePath</name>
          <state>Debug\Exe</state>
        </option>
        <option>
          <name>ObjPath</name>
          <state>Debug\Obj</state>
        </option>
        <option>
          <name>ListPath</name>
          <state>Debug\List</state>
        </option>
        <option>
          <name>GenRuntimeLibSelect</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>GenRuntimeLibSelectSlave</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>GenRTDescription</name>
          <state>Use the normal configuration of the C/EC++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
        </option>
        <option>
          <name>GenRTConfigPath</name>
          <state>$TOOLKIT_DIR$\LIB\dlrxflln.h</state>
        </option>
        <option>
          <name>GenLibInFormatter</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>GenLibInFormatterDescription</name>
          <state>Full formatting.</state>
        </option>
        <option>
          <name>GenLibOutFormatter</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>GenLibOutFormatterDescription</name>
          <state>Full formatting.</state>
        </option>
        <option>
          <name>GeneralEnableMisra</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraVerbose</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraVer</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraRules04</name>
          <version>0</version>
          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
        </option>
        <option>
          <name>GeneralMisraRules98</name>
          <version>0</version>
          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
        </option>
        <option>
          <name>StackSize</name>
          <state>0x100</state>
        </option>
        <option>
          <name>IStackSize</name>
          <state>0x200</state>
        </option>
        <option>
          <name>HeapSize</name>
          <state>0x4</state>
        </option>
        <option>
          <name>GenSubnormalNumbers</name>
          <state>1</state>
        </option>
        <option>
          <name>GenIntSize</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>ICCRX</name>
      <archiveVersion>3</archiveVersion>
      <data>
        <version>10</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IccLockRegisters</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR8</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR9</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR10</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR11</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR12</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR13</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLanguageConformance</name>
          <state>0</state>
        </option>
        <option>
          <name>IccCharIs</name>
          <state>1</state>
        </option>
        <option>
          <name>IccMultibyteSupport</name>
          <state>0</state>
        </option>
        <option>
          <name>IccOptLevel</name>
          <state>1</state>
        </option>
        <option>
          <name>IccOptStrategy</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>IccOptLevelSlave</name>
          <state>1</state>
        </option>
        <option>
          <name>IccOptAllowList</name>
          <version>1</version>
          <state>0000000</state>
        </option>
        <option>
          <name>IccGenerateDebugInfo</name>
          <state>1</state>
        </option>
        <option>
          <name>IccOutputFile</name>
          <state>$FILE_BNAME$.o</state>
        </option>
        <option>
          <name>IccProcessor</name>
          <state>0</state>
        </option>
        <option>
          <name>IccObjPrefix</name>
          <state>1</state>
        </option>
        <option>
          <name>IccLibConfigHeader</name>
          <state>1</state>
        </option>
        <option>
          <name>IccDoubleSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IccDataModel</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmMacroChars</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>IccByteOrder</name>
          <state>1</state>
        </option>
        <option>
          <name>CCDefines</name>
          <state>DEBUG_BUILD</state>
        </option>
        <option>
          <name>CCPreprocFile</name>
          <state>0</state>
        </option>
        <option>
          <name>CCPreprocComments</name>
          <state>0</state>
        </option>
        <option>
          <name>CCPreprocLine</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListCFile</name>
          <state>1</state>
        </option>
        <option>
          <name>CCListCMnemonics</name>
          <state>1</state>
        </option>
        <option>
          <name>CCListCMessages</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListAssFile</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListAssSource</name>
          <state>0</state>
        </option>
        <option>
          <name>CCEnableRemarks</name>
          <state>0</state>
        </option>
        <option>
          <name>CCDiagSuppress</name>
          <state>Pa082, Pe1644, Pa050, Pa039</state>
        </option>
        <option>
          <name>CCDiagRemark</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagWarning</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagError</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagWarnAreErr</name>
          <state>0</state>
        </option>
        <option>
          <name>CCCompilerRuntimeInfo</name>
          <state>0</state>
        </option>
        <option>
          <name>PreInclude</name>
          <state></state>
        </option>
        <option>
          <name>CCIncludePath2</name>
          <state>$PROJ_DIR$\.</state>
          <state>$PROJ_DIR$\..\Common\include</state>
          <state>$PROJ_DIR$\..\..\Source\include</state>
          <state>$PROJ_DIR$\..\..\Source\portable\IAR\RX600</state>
          <state>$PROJ_DIR$\include</state>
          <state>$PROJ_DIR$\..\Common\ethernet\FreeTCPIP</state>
          <state>$PROJ_DIR$\webserver</state>
        </option>
        <option>
          <name>CCStdIncCheck</name>
          <state>0</state>
        </option>
        <option>
          <name>CompilerMisraOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>CompilerMisraRules04</name>
          <version>0</version>
          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
        </option>
        <option>
          <name>CompilerMisraRules98</name>
          <version>0</version>
          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
        </option>
        <option>
          <name>IccUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>IccExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>CompilerCpuCore</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLang</name>
          <state>0</state>
        </option>
        <option>
          <name>IccCDialect</name>
          <state>1</state>
        </option>
        <option>
          <name>IccAllowVLA</name>
          <state>0</state>
        </option>
        <option>
          <name>IccCppDialect</name>
          <state>1</state>
        </option>
        <option>
          <name>IccRequirePrototypes2</name>
          <state>0</state>
        </option>
        <option>
          <name>IccRelaxedFpPrecision</name>
          <state>0</state>
        </option>
        <option>
          <name>IccIntSize</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>ARX</name>
      <archiveVersion>2</archiveVersion>
      <data>
        <version>3</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>AsmCaseSensitivity</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmMultibyteSupport</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmAllowMnemonics</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmAllowDirectives</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmMacroChars</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>AsmDebugInfo</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmListFile</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListNoDiagnostics</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListIncludeCrossRef</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListMacroDefinitions</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListNoMacroExpansion</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListAssembledOnly</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListTruncateMultiline</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmIncludePath</name>
          <state>$TOOLKIT_DIR$\INC\</state>
          <state>$PROJ_DIR$</state>
        </option>
        <option>
          <name>AsmDefines</name>
          <state></state>
        </option>
        <option>
          <name>AsmPreprocOutput</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmPreprocComment</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmPreprocLine</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmEnableRemarks</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmDiagnosticsSuppress</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsRemark</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsWarning</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsError</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsWarningsAreErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmLimitNumberOfErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmMaxNumberOfErrors</name>
          <state>100</state>
        </option>
        <option>
          <name>AsmProcessor</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmObjPrefix</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmOutputFile</name>
          <state>$FILE_BNAME$.o</state>
        </option>
        <option>
          <name>AsmByteOrder</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>AsmDataModel</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmDoubleSize</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmStdIncludeIgnore2</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmIntSize</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>OBJCOPY</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>OOCOutputFormat</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>OCOutputOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>OOCOutputFile</name>
          <state>RTOSDemo.srec</state>
        </option>
        <option>
          <name>OOCCommandLineProducer</name>
          <state>1</state>
        </option>
        <option>
          <name>OOCObjCopyEnable</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>CUSTOM</name>
      <archiveVersion>3</archiveVersion>
      <data>
        <extensions></extensions>
        <cmdline></cmdline>
      </data>
    </settings>
    <settings>
      <name>BICOMP</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
    <settings>
      <name>BUILDACTION</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <prebuild></prebuild>
        <postbuild></postbuild>
      </data>
    </settings>
    <settings>
      <name>ILINK</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IlinkLibIOConfig</name>
          <state>1</state>
        </option>
        <option>
          <name>XLinkMisraHandler</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkInputFileSlave</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkOutputFile</name>
          <state>RTOSDemo.out</state>
        </option>
        <option>
          <name>IlinkDebugInfoEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkKeepSymbols</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryFile</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySymbol</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySegment</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryAlign</name>
          <state></state>
        </option>
        <option>
          <name>IlinkDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkConfigDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkMapFile</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkLogFile</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogInitialization</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogModule</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogSection</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogVeneer</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkIcfOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkIcfFile</name>
          <state>$TOOLKIT_DIR$\CONFIG\lnkr5f562n8.icf</state>
        </option>
        <option>
          <name>IlinkIcfFileSlave</name>
          <state></state>
        </option>
        <option>
          <name>IlinkEnableRemarks</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkSuppressDiags</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsRem</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsWarn</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsErr</name>
          <state></state>
        </option>
        <option>
          <name>IlinkWarningsAreErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkUStackSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkIStackSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkHeapSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>IlinkAutoLibEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkAdditionalLibs</name>
          <state></state>
        </option>
        <option>
          <name>IlinkOverrideProgramEntryLabel</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabelSelect</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabel</name>
          <state>__iar_program_start</state>
        </option>
        <option>
          <name>DoFill</name>
          <state>0</state>
        </option>
        <option>
          <name>FillerByte</name>
          <state>0xFF</state>
        </option>
        <option>
          <name>FillerStart</name>
          <state>0x0</state>
        </option>
        <option>
          <name>FillerEnd</name>
          <state>0x0</state>
        </option>
        <option>
          <name>CrcSize</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>CrcAlign</name>
          <state>1</state>
        </option>
        <option>
          <name>CrcAlgo</name>
          <state>1</state>
        </option>
        <option>
          <name>CrcPoly</name>
          <state>0x11021</state>
        </option>
        <option>
          <name>CrcCompl</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>CrcBitOrder</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>CrcInitialValue</name>
          <state>0x0</state>
        </option>
        <option>
          <name>DoCrc</name>
          <state>0</state>
        </option>
        <option>
          <name>CrcFullSize</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkCspyDebugSupportEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkCspyBufferedWrite</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkLogAutoLibSelect</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogRedirSymbols</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogUnusedFragments</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IARCHIVE</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IarchiveInputs</name>
          <state></state>
        </option>
        <option>
          <name>IarchiveOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>IarchiveOutput</name>
          <state>###Unitialized###</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>BILINK</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
  </configuration>
  <configuration>
    <name>Blinky</name>
    <toolchain>
      <name>RX</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>General</name>
      <archiveVersion>2</archiveVersion>
      <data>
        <version>3</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>OGChipSelectMenu</name>
          <state>R5F562N8       R5F562N8</state>
        </option>
        <option>
          <name>GenDoubleSize</name>
          <state>0</state>
        </option>
        <option>
          <name>GenCodeModel</name>
          <state>0</state>
        </option>
        <option>
          <name>GenDataModel</name>
          <state>2</state>
        </option>
        <option>
          <name>GenByteOrder</name>
          <state>0</state>
        </option>
        <option>
          <name>GOutputBinary</name>
          <state>0</state>
        </option>
        <option>
          <name>ExePath</name>
          <state>Blinky\Exe</state>
        </option>
        <option>
          <name>ObjPath</name>
          <state>Blinky\Obj</state>
        </option>
        <option>
          <name>ListPath</name>
          <state>Blinky\List</state>
        </option>
        <option>
          <name>GenRuntimeLibSelect</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>GenRuntimeLibSelectSlave</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>GenRTDescription</name>
          <state>Use the normal configuration of the C/EC++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
        </option>
        <option>
          <name>GenRTConfigPath</name>
          <state>$TOOLKIT_DIR$\LIB\dlrxflln.h</state>
        </option>
        <option>
          <name>GenLibInFormatter</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>GenLibInFormatterDescription</name>
          <state>Full formatting.</state>
        </option>
        <option>
          <name>GenLibOutFormatter</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>GenLibOutFormatterDescription</name>
          <state>Full formatting.</state>
        </option>
        <option>
          <name>GeneralEnableMisra</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraVerbose</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraVer</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraRules04</name>
          <version>0</version>
          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
        </option>
        <option>
          <name>GeneralMisraRules98</name>
          <version>0</version>
          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
        </option>
        <option>
          <name>StackSize</name>
          <state>0x100</state>
        </option>
        <option>
          <name>IStackSize</name>
          <state>0x200</state>
        </option>
        <option>
          <name>HeapSize</name>
          <state>0x4</state>
        </option>
        <option>
          <name>GenSubnormalNumbers</name>
          <state>1</state>
        </option>
        <option>
          <name>GenIntSize</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>ICCRX</name>
      <archiveVersion>3</archiveVersion>
      <data>
        <version>10</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IccLockRegisters</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR8</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR9</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR10</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR11</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR12</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR13</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLanguageConformance</name>
          <state>0</state>
        </option>
        <option>
          <name>IccCharIs</name>
          <state>1</state>
        </option>
        <option>
          <name>IccMultibyteSupport</name>
          <state>0</state>
        </option>
        <option>
          <name>IccOptLevel</name>
          <state>1</state>
        </option>
        <option>
          <name>IccOptStrategy</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>IccOptLevelSlave</name>
          <state>1</state>
        </option>
        <option>
          <name>IccOptAllowList</name>
          <version>1</version>
          <state>0000000</state>
        </option>
        <option>
          <name>IccGenerateDebugInfo</name>
          <state>1</state>
        </option>
        <option>
          <name>IccOutputFile</name>
          <state>$FILE_BNAME$.o</state>
        </option>
        <option>
          <name>IccProcessor</name>
          <state>0</state>
        </option>
        <option>
          <name>IccObjPrefix</name>
          <state>1</state>
        </option>
        <option>
          <name>IccLibConfigHeader</name>
          <state>1</state>
        </option>
        <option>
          <name>IccDoubleSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IccDataModel</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmMacroChars</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>IccByteOrder</name>
          <state>1</state>
        </option>
        <option>
          <name>CCDefines</name>
          <state></state>
        </option>
        <option>
          <name>CCPreprocFile</name>
          <state>0</state>
        </option>
        <option>
          <name>CCPreprocComments</name>
          <state>0</state>
        </option>
        <option>
          <name>CCPreprocLine</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListCFile</name>
          <state>1</state>
        </option>
        <option>
          <name>CCListCMnemonics</name>
          <state>1</state>
        </option>
        <option>
          <name>CCListCMessages</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListAssFile</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListAssSource</name>
          <state>0</state>
        </option>
        <option>
          <name>CCEnableRemarks</name>
          <state>0</state>
        </option>
        <option>
          <name>CCDiagSuppress</name>
          <state>Pa082</state>
        </option>
        <option>
          <name>CCDiagRemark</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagWarning</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagError</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagWarnAreErr</name>
          <state>0</state>
        </option>
        <option>
          <name>CCCompilerRuntimeInfo</name>
          <state>0</state>
        </option>
        <option>
          <name>PreInclude</name>
          <state></state>
        </option>
        <option>
          <name>CCIncludePath2</name>
          <state>$PROJ_DIR$\.</state>
          <state>$PROJ_DIR$\..\Common\include</state>
          <state>$PROJ_DIR$\..\..\Source\include</state>
          <state>$PROJ_DIR$\..\..\Source\portable\IAR\RX600</state>
          <state>$PROJ_DIR$\include</state>
          <state>$PROJ_DIR$\webserver</state>
        </option>
        <option>
          <name>CCStdIncCheck</name>
          <state>0</state>
        </option>
        <option>
          <name>CompilerMisraOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>CompilerMisraRules04</name>
          <version>0</version>
          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
        </option>
        <option>
          <name>CompilerMisraRules98</name>
          <version>0</version>
          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
        </option>
        <option>
          <name>IccUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>IccExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>CompilerCpuCore</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLang</name>
          <state>0</state>
        </option>
        <option>
          <name>IccCDialect</name>
          <state>1</state>
        </option>
        <option>
          <name>IccAllowVLA</name>
          <state>0</state>
        </option>
        <option>
          <name>IccCppDialect</name>
          <state>1</state>
        </option>
        <option>
          <name>IccRequirePrototypes2</name>
          <state>0</state>
        </option>
        <option>
          <name>IccRelaxedFpPrecision</name>
          <state>0</state>
        </option>
        <option>
          <name>IccIntSize</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>ARX</name>
      <archiveVersion>2</archiveVersion>
      <data>
        <version>3</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>AsmCaseSensitivity</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmMultibyteSupport</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmAllowMnemonics</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmAllowDirectives</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmMacroChars</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>AsmDebugInfo</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmListFile</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListNoDiagnostics</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListIncludeCrossRef</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListMacroDefinitions</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListNoMacroExpansion</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListAssembledOnly</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListTruncateMultiline</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmIncludePath</name>
          <state>$TOOLKIT_DIR$\INC\</state>
          <state>$PROJ_DIR$</state>
        </option>
        <option>
          <name>AsmDefines</name>
          <state></state>
        </option>
        <option>
          <name>AsmPreprocOutput</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmPreprocComment</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmPreprocLine</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmEnableRemarks</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmDiagnosticsSuppress</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsRemark</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsWarning</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsError</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsWarningsAreErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmLimitNumberOfErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmMaxNumberOfErrors</name>
          <state>100</state>
        </option>
        <option>
          <name>AsmProcessor</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmObjPrefix</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmOutputFile</name>
          <state>$FILE_BNAME$.o</state>
        </option>
        <option>
          <name>AsmByteOrder</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>AsmDataModel</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmDoubleSize</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmStdIncludeIgnore2</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmIntSize</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>OBJCOPY</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>OOCOutputFormat</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>OCOutputOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>OOCOutputFile</name>
          <state>RTOSDemo.srec</state>
        </option>
        <option>
          <name>OOCCommandLineProducer</name>
          <state>1</state>
        </option>
        <option>
          <name>OOCObjCopyEnable</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>CUSTOM</name>
      <archiveVersion>3</archiveVersion>
      <data>
        <extensions></extensions>
        <cmdline></cmdline>
      </data>
    </settings>
    <settings>
      <name>BICOMP</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
    <settings>
      <name>BUILDACTION</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <prebuild></prebuild>
        <postbuild></postbuild>
      </data>
    </settings>
    <settings>
      <name>ILINK</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IlinkLibIOConfig</name>
          <state>1</state>
        </option>
        <option>
          <name>XLinkMisraHandler</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkInputFileSlave</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkOutputFile</name>
          <state>RTOSDemo.out</state>
        </option>
        <option>
          <name>IlinkDebugInfoEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkKeepSymbols</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryFile</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySymbol</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySegment</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryAlign</name>
          <state></state>
        </option>
        <option>
          <name>IlinkDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkConfigDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkMapFile</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkLogFile</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogInitialization</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogModule</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogSection</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogVeneer</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkIcfOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkIcfFile</name>
          <state>$TOOLKIT_DIR$\CONFIG\lnkr5f562n8.icf</state>
        </option>
        <option>
          <name>IlinkIcfFileSlave</name>
          <state></state>
        </option>
        <option>
          <name>IlinkEnableRemarks</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkSuppressDiags</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsRem</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsWarn</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsErr</name>
          <state></state>
        </option>
        <option>
          <name>IlinkWarningsAreErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkUStackSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkIStackSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkHeapSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>IlinkAutoLibEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkAdditionalLibs</name>
          <state></state>
        </option>
        <option>
          <name>IlinkOverrideProgramEntryLabel</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabelSelect</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabel</name>
          <state>__iar_program_start</state>
        </option>
        <option>
          <name>DoFill</name>
          <state>0</state>
        </option>
        <option>
          <name>FillerByte</name>
          <state>0xFF</state>
        </option>
        <option>
          <name>FillerStart</name>
          <state>0x0</state>
        </option>
        <option>
          <name>FillerEnd</name>
          <state>0x0</state>
        </option>
        <option>
          <name>CrcSize</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>CrcAlign</name>
          <state>1</state>
        </option>
        <option>
          <name>CrcAlgo</name>
          <state>1</state>
        </option>
        <option>
          <name>CrcPoly</name>
          <state>0x11021</state>
        </option>
        <option>
          <name>CrcCompl</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>CrcBitOrder</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>CrcInitialValue</name>
          <state>0x0</state>
        </option>
        <option>
          <name>DoCrc</name>
          <state>0</state>
        </option>
        <option>
          <name>CrcFullSize</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkCspyDebugSupportEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkCspyBufferedWrite</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogAutoLibSelect</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogRedirSymbols</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogUnusedFragments</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IARCHIVE</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IarchiveInputs</name>
          <state></state>
        </option>
        <option>
          <name>IarchiveOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>IarchiveOutput</name>
          <state>###Unitialized###</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>BILINK</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
  </configuration>
  <configuration>
    <name>Debug-with-optimisation</name>
    <toolchain>
      <name>RX</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>General</name>
      <archiveVersion>2</archiveVersion>
      <data>
        <version>3</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>OGChipSelectMenu</name>
          <state>R5F562N8       R5F562N8</state>
        </option>
        <option>
          <name>GenDoubleSize</name>
          <state>0</state>
        </option>
        <option>
          <name>GenCodeModel</name>
          <state>0</state>
        </option>
        <option>
          <name>GenDataModel</name>
          <state>1</state>
        </option>
        <option>
          <name>GenByteOrder</name>
          <state>0</state>
        </option>
        <option>
          <name>GOutputBinary</name>
          <state>0</state>
        </option>
        <option>
          <name>ExePath</name>
          <state>Debug-with-optimisation\Exe</state>
        </option>
        <option>
          <name>ObjPath</name>
          <state>Debug-with-optimisation\Obj</state>
        </option>
        <option>
          <name>ListPath</name>
          <state>Debug-with-optimisation\List</state>
        </option>
        <option>
          <name>GenRuntimeLibSelect</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>GenRuntimeLibSelectSlave</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>GenRTDescription</name>
          <state>Use the normal configuration of the C/EC++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
        </option>
        <option>
          <name>GenRTConfigPath</name>
          <state>$TOOLKIT_DIR$\LIB\dlrxflln.h</state>
        </option>
        <option>
          <name>GenLibInFormatter</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>GenLibInFormatterDescription</name>
          <state>Full formatting.</state>
        </option>
        <option>
          <name>GenLibOutFormatter</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>GenLibOutFormatterDescription</name>
          <state>Full formatting.</state>
        </option>
        <option>
          <name>GeneralEnableMisra</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraVerbose</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraVer</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraRules04</name>
          <version>0</version>
          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
        </option>
        <option>
          <name>GeneralMisraRules98</name>
          <version>0</version>
          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
        </option>
        <option>
          <name>StackSize</name>
          <state>0x100</state>
        </option>
        <option>
          <name>IStackSize</name>
          <state>0x200</state>
        </option>
        <option>
          <name>HeapSize</name>
          <state>0x4</state>
        </option>
        <option>
          <name>GenSubnormalNumbers</name>
          <state>1</state>
        </option>
        <option>
          <name>GenIntSize</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>ICCRX</name>
      <archiveVersion>3</archiveVersion>
      <data>
        <version>10</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IccLockRegisters</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR8</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR9</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR10</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR11</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR12</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLockR13</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLanguageConformance</name>
          <state>0</state>
        </option>
        <option>
          <name>IccCharIs</name>
          <state>1</state>
        </option>
        <option>
          <name>IccMultibyteSupport</name>
          <state>0</state>
        </option>
        <option>
          <name>IccOptLevel</name>
          <state>1</state>
        </option>
        <option>
          <name>IccOptStrategy</name>
          <version>0</version>
          <state>2</state>
        </option>
        <option>
          <name>IccOptLevelSlave</name>
          <state>1</state>
        </option>
        <option>
          <name>IccOptAllowList</name>
          <version>1</version>
          <state>0000000</state>
        </option>
        <option>
          <name>IccGenerateDebugInfo</name>
          <state>1</state>
        </option>
        <option>
          <name>IccOutputFile</name>
          <state>$FILE_BNAME$.o</state>
        </option>
        <option>
          <name>IccProcessor</name>
          <state>0</state>
        </option>
        <option>
          <name>IccObjPrefix</name>
          <state>1</state>
        </option>
        <option>
          <name>IccLibConfigHeader</name>
          <state>1</state>
        </option>
        <option>
          <name>IccDoubleSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IccDataModel</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmMacroChars</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>IccByteOrder</name>
          <state>1</state>
        </option>
        <option>
          <name>CCDefines</name>
          <state>INCLUDE_HIGH_FREQUENCY_TIMER_TEST</state>
        </option>
        <option>
          <name>CCPreprocFile</name>
          <state>0</state>
        </option>
        <option>
          <name>CCPreprocComments</name>
          <state>0</state>
        </option>
        <option>
          <name>CCPreprocLine</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListCFile</name>
          <state>1</state>
        </option>
        <option>
          <name>CCListCMnemonics</name>
          <state>1</state>
        </option>
        <option>
          <name>CCListCMessages</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListAssFile</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListAssSource</name>
          <state>0</state>
        </option>
        <option>
          <name>CCEnableRemarks</name>
          <state>0</state>
        </option>
        <option>
          <name>CCDiagSuppress</name>
          <state>Pa082, Pe1644, Pa050, Pa039</state>
        </option>
        <option>
          <name>CCDiagRemark</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagWarning</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagError</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagWarnAreErr</name>
          <state>0</state>
        </option>
        <option>
          <name>CCCompilerRuntimeInfo</name>
          <state>0</state>
        </option>
        <option>
          <name>PreInclude</name>
          <state></state>
        </option>
        <option>
          <name>CCIncludePath2</name>
          <state>$PROJ_DIR$\.</state>
          <state>$PROJ_DIR$\..\Common\include</state>
          <state>$PROJ_DIR$\..\..\Source\include</state>
          <state>$PROJ_DIR$\..\..\Source\portable\IAR\RX600</state>
          <state>$PROJ_DIR$\include</state>
          <state>$PROJ_DIR$\..\Common\ethernet\FreeTCPIP</state>
          <state>$PROJ_DIR$\webserver</state>
        </option>
        <option>
          <name>CCStdIncCheck</name>
          <state>0</state>
        </option>
        <option>
          <name>CompilerMisraOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>CompilerMisraRules04</name>
          <version>0</version>
          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
        </option>
        <option>
          <name>CompilerMisraRules98</name>
          <version>0</version>
          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
        </option>
        <option>
          <name>IccUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>IccExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>CompilerCpuCore</name>
          <state>0</state>
        </option>
        <option>
          <name>IccLang</name>
          <state>0</state>
        </option>
        <option>
          <name>IccCDialect</name>
          <state>1</state>
        </option>
        <option>
          <name>IccAllowVLA</name>
          <state>0</state>
        </option>
        <option>
          <name>IccCppDialect</name>
          <state>1</state>
        </option>
        <option>
          <name>IccRequirePrototypes2</name>
          <state>0</state>
        </option>
        <option>
          <name>IccRelaxedFpPrecision</name>
          <state>0</state>
        </option>
        <option>
          <name>IccIntSize</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>ARX</name>
      <archiveVersion>2</archiveVersion>
      <data>
        <version>3</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>AsmCaseSensitivity</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmMultibyteSupport</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmAllowMnemonics</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmAllowDirectives</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmMacroChars</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>AsmDebugInfo</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmListFile</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListNoDiagnostics</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListIncludeCrossRef</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListMacroDefinitions</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListNoMacroExpansion</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListAssembledOnly</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmListTruncateMultiline</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmIncludePath</name>
          <state>$TOOLKIT_DIR$\INC\</state>
          <state>$PROJ_DIR$</state>
        </option>
        <option>
          <name>AsmDefines</name>
          <state></state>
        </option>
        <option>
          <name>AsmPreprocOutput</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmPreprocComment</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmPreprocLine</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmEnableRemarks</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmDiagnosticsSuppress</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsRemark</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsWarning</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsError</name>
          <state></state>
        </option>
        <option>
          <name>AsmDiagnosticsWarningsAreErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmLimitNumberOfErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmMaxNumberOfErrors</name>
          <state>100</state>
        </option>
        <option>
          <name>AsmProcessor</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmObjPrefix</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmOutputFile</name>
          <state>$FILE_BNAME$.o</state>
        </option>
        <option>
          <name>AsmByteOrder</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>AsmDataModel</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmDoubleSize</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmStdIncludeIgnore2</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmIntSize</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>OBJCOPY</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>OOCOutputFormat</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>OCOutputOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>OOCOutputFile</name>
          <state>RTOSDemo.srec</state>
        </option>
        <option>
          <name>OOCCommandLineProducer</name>
          <state>1</state>
        </option>
        <option>
          <name>OOCObjCopyEnable</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>CUSTOM</name>
      <archiveVersion>3</archiveVersion>
      <data>
        <extensions></extensions>
        <cmdline></cmdline>
      </data>
    </settings>
    <settings>
      <name>BICOMP</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
    <settings>
      <name>BUILDACTION</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <prebuild></prebuild>
        <postbuild></postbuild>
      </data>
    </settings>
    <settings>
      <name>ILINK</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IlinkLibIOConfig</name>
          <state>1</state>
        </option>
        <option>
          <name>XLinkMisraHandler</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkInputFileSlave</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkOutputFile</name>
          <state>RTOSDemo.out</state>
        </option>
        <option>
          <name>IlinkDebugInfoEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkKeepSymbols</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryFile</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySymbol</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySegment</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryAlign</name>
          <state></state>
        </option>
        <option>
          <name>IlinkDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkConfigDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkMapFile</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkLogFile</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogInitialization</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogModule</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogSection</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogVeneer</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkIcfOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkIcfFile</name>
          <state>$TOOLKIT_DIR$\CONFIG\lnkr5f562n8.icf</state>
        </option>
        <option>
          <name>IlinkIcfFileSlave</name>
          <state></state>
        </option>
        <option>
          <name>IlinkEnableRemarks</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkSuppressDiags</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsRem</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsWarn</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsErr</name>
          <state></state>
        </option>
        <option>
          <name>IlinkWarningsAreErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkUStackSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkIStackSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkHeapSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>IlinkAutoLibEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkAdditionalLibs</name>
          <state></state>
        </option>
        <option>
          <name>IlinkOverrideProgramEntryLabel</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabelSelect</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabel</name>
          <state>__iar_program_start</state>
        </option>
        <option>
          <name>DoFill</name>
          <state>0</state>
        </option>
        <option>
          <name>FillerByte</name>
          <state>0xFF</state>
        </option>
        <option>
          <name>FillerStart</name>
          <state>0x0</state>
        </option>
        <option>
          <name>FillerEnd</name>
          <state>0x0</state>
        </option>
        <option>
          <name>CrcSize</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>CrcAlign</name>
          <state>1</state>
        </option>
        <option>
          <name>CrcAlgo</name>
          <state>1</state>
        </option>
        <option>
          <name>CrcPoly</name>
          <state>0x11021</state>
        </option>
        <option>
          <name>CrcCompl</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>CrcBitOrder</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>CrcInitialValue</name>
          <state>0x0</state>
        </option>
        <option>
          <name>DoCrc</name>
          <state>0</state>
        </option>
        <option>
          <name>CrcFullSize</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkCspyDebugSupportEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkCspyBufferedWrite</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogAutoLibSelect</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogRedirSymbols</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogUnusedFragments</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IARCHIVE</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IarchiveInputs</name>
          <state></state>
        </option>
        <option>
          <name>IarchiveOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>IarchiveOutput</name>
          <state>###Unitialized###</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>BILINK</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
  </configuration>
  <group>
    <name>Common Demo Files</name>
    <excluded>
      <configuration>Blinky</configuration>
    </excluded>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\BlockQ.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\blocktim.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\death.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\flash.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\flop.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\GenQTest.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\integer.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\IntQueue.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\PollQ.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\QPeek.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\recmutex.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\Minimal\semtest.c</name>
    </file>
  </group>
  <group>
    <name>FreeRTOS Source</name>
    <group>
      <name>Portable Layer</name>
      <file>
        <name>$PROJ_DIR$\..\..\Source\portable\MemMang\heap_2.c</name>
      </file>
      <file>
        <name>$PROJ_DIR$\..\..\Source\portable\IAR\RX600\port.c</name>
      </file>
      <file>
        <name>$PROJ_DIR$\..\..\Source\portable\IAR\RX600\port_asm.s</name>
      </file>
    </group>
    <file>
      <name>$PROJ_DIR$\..\..\Source\list.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\..\Source\queue.c</name>
    </file>
    <file>
      <name>$PROJ_DIR$\..\..\Source\tasks.c</name>
    </file>
  </group>
  <group>
    <name>FreeTCPIP (based on uIP)</name>
    <group>
      <name>webserver</name>
      <group>
        <name>Common</name>
        <file>
          <name>$PROJ_DIR$\..\Common\ethernet\FreeTCPIP\apps\httpd\http-strings.c</name>
          <excluded>
            <configuration>Blinky</configuration>
          </excluded>
        </file>
        <file>
          <name>$PROJ_DIR$\..\Common\ethernet\FreeTCPIP\apps\httpd\httpd-fs.c</name>
          <excluded>
            <configuration>Blinky</configuration>
          </excluded>
        </file>
        <file>
          <name>$PROJ_DIR$\..\Common\ethernet\FreeTCPIP\apps\httpd\httpd.c</name>
          <excluded>
            <configuration>Blinky</configuration>
          </excluded>
        </file>
      </group>
      <group>
        <name>Port specific</name>
        <file>
          <name>$PROJ_DIR$\webserver\EMAC.c</name>
          <excluded>
            <configuration>Blinky</configuration>
          </excluded>
        </file>
        <file>
          <name>$PROJ_DIR$\webserver\httpd-cgi.c</name>
          <excluded>
            <configuration>Blinky</configuration>
          </excluded>
        </file>
        <file>
          <name>$PROJ_DIR$\webserver\phy.c</name>
          <excluded>
            <configuration>Blinky</configuration>
          </excluded>
        </file>
      </group>
    </group>
    <file>
      <name>$PROJ_DIR$\..\Common\ethernet\FreeTCPIP\psock.c</name>
      <excluded>
        <configuration>Blinky</configuration>
      </excluded>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\ethernet\FreeTCPIP\timer.c</name>
      <excluded>
        <configuration>Blinky</configuration>
      </excluded>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\ethernet\FreeTCPIP\uip.c</name>
      <excluded>
        <configuration>Blinky</configuration>
      </excluded>
    </file>
    <file>
      <name>$PROJ_DIR$\..\Common\ethernet\FreeTCPIP\uip_arp.c</name>
      <excluded>
        <configuration>Blinky</configuration>
      </excluded>
    </file>
  </group>
  <group>
    <name>Renesas Files</name>
    <file>
      <name>$PROJ_DIR$\Renesas-Files\hwsetup.c</name>
    </file>
  </group>
  <file>
    <name>$PROJ_DIR$\HighFrequencyTimerTest.c</name>
    <excluded>
      <configuration>Blinky</configuration>
    </excluded>
  </file>
  <file>
    <name>$PROJ_DIR$\IntQueueTimer.c</name>
    <excluded>
      <configuration>Blinky</configuration>
    </excluded>
  </file>
  <file>
    <name>$PROJ_DIR$\main-blinky.c</name>
    <excluded>
      <configuration>Debug</configuration>
      <configuration>Debug-with-optimisation</configuration>
    </excluded>
  </file>
  <file>
    <name>$PROJ_DIR$\main-full.c</name>
    <excluded>
      <configuration>Blinky</configuration>
    </excluded>
  </file>
  <file>
    <name>$PROJ_DIR$\ParTest.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\RegTest.s</name>
    <excluded>
      <configuration>Blinky</configuration>
    </excluded>
  </file>
  <file>
    <name>$PROJ_DIR$\uIP_Task.c</name>
    <excluded>
      <configuration>Blinky</configuration>
    </excluded>
  </file>
</project>

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.