URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [WizNET_DEMO_GCC_ARM7/] [boot.s] - Rev 800
Go to most recent revision | Compare with Previous | Blame | View Log
/* Sample initialization file */ .extern main .extern exit .text .code 32 .align 0 .extern __bss_beg__ .extern __bss_end__ .extern __stack_end__ .extern __data_beg__ .extern __data_end__ .extern __data+beg_src__ .global start .global endless_loop /* Stack Sizes */ .set UND_STACK_SIZE, 0x00000004 .set ABT_STACK_SIZE, 0x00000004 .set FIQ_STACK_SIZE, 0x00000004 .set IRQ_STACK_SIZE, 0X00000400 .set SVC_STACK_SIZE, 0x00000400 /* Standard definitions of Mode bits and Interrupt (I & F) flags in PSRs */ .set MODE_USR, 0x10 /* User Mode */ .set MODE_FIQ, 0x11 /* FIQ Mode */ .set MODE_IRQ, 0x12 /* IRQ Mode */ .set MODE_SVC, 0x13 /* Supervisor Mode */ .set MODE_ABT, 0x17 /* Abort Mode */ .set MODE_UND, 0x1B /* Undefined Mode */ .set MODE_SYS, 0x1F /* System Mode */ .equ I_BIT, 0x80 /* when I bit is set, IRQ is disabled */ .equ F_BIT, 0x40 /* when F bit is set, FIQ is disabled */ start: _start: _mainCRTStartup: /* Setup a stack for each mode - note that this only sets up a usable stack for system/user, SWI and IRQ modes. Also each mode is setup with interrupts initially disabled. */ ldr r0, .LC6 msr CPSR_c, #MODE_UND|I_BIT|F_BIT /* Undefined Instruction Mode */ mov sp, r0 sub r0, r0, #UND_STACK_SIZE msr CPSR_c, #MODE_ABT|I_BIT|F_BIT /* Abort Mode */ mov sp, r0 sub r0, r0, #ABT_STACK_SIZE msr CPSR_c, #MODE_FIQ|I_BIT|F_BIT /* FIQ Mode */ mov sp, r0 sub r0, r0, #FIQ_STACK_SIZE msr CPSR_c, #MODE_IRQ|I_BIT|F_BIT /* IRQ Mode */ mov sp, r0 sub r0, r0, #IRQ_STACK_SIZE msr CPSR_c, #MODE_SVC|I_BIT|F_BIT /* Supervisor Mode */ mov sp, r0 sub r0, r0, #SVC_STACK_SIZE msr CPSR_c, #MODE_SYS|I_BIT|F_BIT /* System Mode */ mov sp, r0 /* We want to start in supervisor mode. Operation will switch to system mode when the first task starts. */ msr CPSR_c, #MODE_SVC|I_BIT|F_BIT /* Clear BSS. */ mov a2, #0 /* Fill value */ mov fp, a2 /* Null frame pointer */ mov r7, a2 /* Null frame pointer for Thumb */ ldr r1, .LC1 /* Start of memory block */ ldr r3, .LC2 /* End of memory block */ subs r3, r3, r1 /* Length of block */ beq .end_clear_loop mov r2, #0 .clear_loop: strb r2, [r1], #1 subs r3, r3, #1 bgt .clear_loop .end_clear_loop: /* Initialise data. */ ldr r1, .LC3 /* Start of memory block */ ldr r2, .LC4 /* End of memory block */ ldr r3, .LC5 subs r3, r3, r1 /* Length of block */ beq .end_set_loop .set_loop: ldrb r4, [r2], #1 strb r4, [r1], #1 subs r3, r3, #1 bgt .set_loop .end_set_loop: mov r0, #0 /* no arguments */ mov r1, #0 /* no argv either */ bl main endless_loop: b endless_loop .align 0 .LC1: .word __bss_beg__ .LC2: .word __bss_end__ .LC3: .word __data_beg__ .LC4: .word __data_beg_src__ .LC5: .word __data_end__ .LC6: .word __stack_end__ /* Setup vector table. Note that undf, pabt, dabt, fiq just execute a null loop. */ .section .startup,"ax" .code 32 .align 0 b _start /* reset - _start */ ldr pc, _undf /* undefined - _undf */ ldr pc, _swi /* SWI - _swi */ ldr pc, _pabt /* program abort - _pabt */ ldr pc, _dabt /* data abort - _dabt */ nop /* reserved */ ldr pc, [pc,#-0xFF0] /* IRQ - read the VIC */ ldr pc, _fiq /* FIQ - _fiq */ _undf: .word __undf /* undefined */ _swi: .word vPortYieldProcessor /* SWI */ _pabt: .word __pabt /* program abort */ _dabt: .word __dabt /* data abort */ _fiq: .word __fiq /* FIQ */ __undf: b . /* undefined */ __pabt: b . /* program abort */ __dabt: b . /* data abort */ __fiq: b . /* FIQ */
Go to most recent revision | Compare with Previous | Blame | View Log