Subversion Repositories openrisc

// 186.cfg
//      You must select RAM, ROM for your controller   04-26-2000
//      Your TERN controller is installed with SRAM and ROM with different sizes.
//      For debug, 128K or 512K SRAM can be selected
//      For build a ROM, you need to select the ROM size.
// How to select ?
//      1) commend out the unwanted #define RAM size line with "//"
//      2) delete the "//" preceding the wanted #define RAM size line
//

// #define RAM 32 // 32KB SRAM installed
#define RAM 128 // 128KB SRAM installed
// #define RAM 512 // 512KB SRAM installed

// #define ROM 32 // Use 32KB ROM chip 27C256-70
#define ROM 64 // Use 64KB ROM chip 27C512-70
// #define ROM 128 // Use 128KB ROM chip 27C010-70 
// #define ROM 256 // Use 256KB ROM chip 27C020-70
// #define ROM 512 // Use 512KB ROM chip 27C040-70, Change Jumper on board


cputype Am186ES // AMD188/6 based controllers

#if defined(__PDREMOTE__)

#if RAM == 32
map     0x00000 to 0x00fff as reserved // interrupt vector table
map     0x01000 to 0x03fff as rdwr      // System RAM area (60KB RAM)
map     0x04000 to 0x07fff as rdonly    // Simulated EPROM area (64KB RAM)
map     0x08000 to 0xfffff as reserved  // No access allowed
#define CODE_START 0x0400       // Start of application code, STEP2 !

#elif RAM == 128
map     0x00000 to 0x00fff as reserved // interrupt vector table
map     0x01000 to 0x07fff as rdwr      // System RAM area (60KB RAM)
map     0x08000 to 0x1ffff as rdonly    // Simulated EPROM area (64KB RAM)
map     0x20000 to 0xfffff as reserved  // No access allowed
#define CODE_START 0x0800               // Start of application code

#elif RAM == 512
map     0x00000 to 0x00fff as reserved // interrupt vector table
map     0x01000 to 0x07fff as rdwr      // System RAM area (60KB RAM)
map     0x08000 to 0x7ffff as rdonly    // Simulated EPROM area(480KB RAM)
map     0x80000 to 0xfffff as reserved // No access allowed
#define CODE_START 0x0800               // Start of application code
#endif

#define DATA_START 0x0100       // Start of application data
#define BOOT_START 0x1fc0       // Start of initialization code

#else
#if ROM == 32                       
map     0x00000 to 0x1ffff as rdwr      // 128KB RAM address space
map     0x20000 to 0xf7fff as reserved  // No access
map     0xF8000 to 0xfffff as rdonly    // 32KB EPROM address space
#define CODE_START 0xF800               // Start of application code
#elif ROM == 64
map     0x00000 to 0x1ffff as rdwr      // 128KB RAM address space
map     0x20000 to 0xEffff as reserved  // No access
map     0xF0000 to 0xfffff as rdonly    // 64KB EPROM address space
#define CODE_START 0xF000               // Start of application code
#elif ROM == 128
map     0x00000 to 0x1ffff as rdwr      // 128KB RAM address space
map     0x20000 to 0xDffff as reserved  // No access
map     0xE0000 to 0xfffff as rdonly    // 128KB EPROM address space
#define CODE_START 0xE000               // Start of application code
#elif ROM == 256
map     0x00000 to 0x1ffff as rdwr      // 128KB RAM address space
map     0x20000 to 0xBffff as reserved  // No access
map     0xC0000 to 0xfffff as rdonly    // 256KB EPROM address space
#define CODE_START 0xC000                       // Start of application code
#elif ROM == 512
map     0x00000 to 0x1ffff as rdwr                      // 128KB RAM address space
map     0x20000 to 0x7ffff as reserved  // No access
map     0x80000 to 0xfffff as rdonly            // 512KB EPROM address space
#define CODE_START 0x8000                       // Start of application code
#endif

#define DATA_START              0x0040                  // Start of application data
#define BOOT_START              0xffc0                  // Start of initialization code

initcode        reset           \ // Reset vector to program entry point
                umcs = 0x80bf   \ // 512K ROM, 3 wait states
                lmcs = 0x7fbf   \ // 512K RAM, 3 wait states
                mpcs = 0xa0bf   \
                mmcs = 0x81ff   \
                pacs = 0x007f

class   ??LOCATE = BOOT_START           // Chip select initialization
output  ??LOCATE

#if ROM == 32                   // 27C256-90 EPROM or FLASH
hexfile binary offset=0xf8000 size=32   // for 27C256, bin file
#elif ROM == 64                         // 27C512-90 EPROM or FLASH
hexfile binary offset=0xF0000 size=64   // for 27C512
#elif ROM == 128                        // 27C010-90 EPROM or FLASH
hexfile binary offset=0xE0000 size=128  // for 27C010
#elif ROM == 256                        // 27C020-90 EPROM or FLASH
hexfile binary offset=0xC0000 size=256  // for 27C020
#elif ROM == 512                        // 27C040-90 EPROM or FLASH
hexfile Intel86 offset=0x80000 size=512 // for 27C040, output .HEX file
#endif

#endif


//
// Start of common configuration file settings.
//

absfile axe86                                                                   // Paradigm C++ debugging output
listfile        segments                                                                // Absolute segment map

dup             DATA ROMDATA            // Make a copy of initialized data
dup             FAR_DATA ROMFARDATA     // Make a copy of far initialized data

#if defined(__COMPFARDATA__)            // Compress and display results
compress        ROMFARDATA
display compression
#endif

class           CODE = CODE_START       // Application code
class           DATA = DATA_START       // Application data

order           DATA                                                            \       // RAM class organization
                        BSS                     \
                        NVRAM                   \
                        EDATA                   \
                        STACK                   \
                        FAR_DATA ENDFAR_DATA    \
                        FAR_BSS ENDFAR_BSS      \
                        FAR_HEAP ENDFAR_HEAP

order           CODE                            \       // EPROM class organization
                        INITDATA EXITDATA       \
                        FAR_CONST ENDFAR_CONST  \
                        ROMDATA ENDROMDATA      \
                        ROMFARDATA ENDROMFARDATA

output  CODE                                    \       // Classes in the output file(s)
                        INITDATA EXITDATA       \
                        FAR_CONST ENDFAR_CONST  \
                        ROMDATA ENDROMDATA      \
                        ROMFARDATA ENDROMFARDATA