URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [WizNET_DEMO_TERN_186/] [main.c] - Rev 585
Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /* * Creates all the demo application tasks then starts the scheduler. In * addition to the standard demo application tasks main() creates the * HTTPServer task, and a "Check" task. The Check task periodically inspects * all the other tasks in the system to see if any errors have been reported. * The error status is then displayed on the served WEB page. */ /* Tern includes. */ #include <ae.h> #include <embedded.h> /* FreeRTOS.org includes. */ #include <FreeRTOS.h> #include <task.h> /* Demo application includes. */ #include "HTTPTask.h" #include "integer.h" #include "PollQ.h" #include "semtest.h" #include "dynamic.h" #include "BlockQ.h" #include "death.h" #include "serial.h" #include "comtest.h" /* How often should the "check" task execute? */ #define mainCHECK_DELAY ( 3000 / portTICK_RATE_MS ) /* Priorities allocated to the various tasks. */ #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 ) #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 4 ) #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 ) #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 ) #define mainHTTP_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 ) #define mainSUICIDE_TASKS_PRIORITY ( tskIDLE_PRIORITY + 1 ) #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 ) /* Used to indicate the error status. A value of 0 means that an error has not been detected in any task. A non zero value indicates which group of demo tasks has reported an error. See prvCheckTask() for bit definitions. */ unsigned short usCheckStatus = 0; /*-----------------------------------------------------------*/ /* * Setup any hardware required by the demo - other than the RTOS tick which * is configured when the scheduler is started. */ static void prvSetupHardware( void ); /* * Periodically inspect all the other tasks, updating usCheckStatus should an * error be discovered in any task. */ static void prvCheckTask( void *pvParameters ); /*-----------------------------------------------------------*/ void main(void) { prvSetupHardware(); /* Start the HTTP server task. */ xTaskCreate( vHTTPTask, "WizNet", configMINIMAL_STACK_SIZE, NULL, mainHTTP_TASK_PRIORITY, NULL ); /* Start the demo/test application tasks. See the demo application section of the FreeRTOS.org WEB site for more information. */ vStartIntegerMathTasks( tskIDLE_PRIORITY ); vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY ); vStartSemaphoreTasks( mainSEM_TEST_PRIORITY ); vStartDynamicPriorityTasks(); vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY ); vStartComTestTasks( mainCOM_TEST_PRIORITY, serCOM2, ser57600 ); /* Start the task that checks the other demo tasks for errors. */ xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL ); /* The suicide tasks must be created last as they monitor the number of tasks in the system to ensure there are no more or fewer than expected compared to the number that were executing when the task started. */ vCreateSuicidalTasks( mainSUICIDE_TASKS_PRIORITY ); /* Finally start the scheduler. */ vTaskStartScheduler(); /* Should not get here! */ for( ;; ); } /*-----------------------------------------------------------*/ static void prvSetupHardware( void ) { ae_init(); } /*-----------------------------------------------------------*/ static void prvCheckTask( void *pvParameters ) { ( void ) pvParameters; /* Check all the demo tasks to ensure that they are all still running, and that none of them have detected an error. */ for( ;; ) { /* Block until it is time to check again. */ vTaskDelay( mainCHECK_DELAY ); if( xAreIntegerMathsTaskStillRunning() != pdTRUE ) { usCheckStatus |= 0x01; } if( xArePollingQueuesStillRunning() != pdTRUE ) { usCheckStatus |= 0x02; } if( xAreSemaphoreTasksStillRunning() != pdTRUE ) { usCheckStatus |= 0x04; } if( xAreDynamicPriorityTasksStillRunning() != pdTRUE ) { usCheckStatus |= 0x08; } if( xAreBlockingQueuesStillRunning() != pdTRUE ) { usCheckStatus |= 0x10; } if( xIsCreateTaskStillRunning() != pdTRUE ) { usCheckStatus |= 0x20; } if( xAreComTestTasksStillRunning() != pdTRUE ) { usCheckStatus |= 0x40; } } } /*-----------------------------------------------------------*/ /* This is included to prevent link errors - allowing the 'full' version of the comtest tasks to be used. It can be ignored. */ void vPrintDisplayMessage( const char * const * ppcMessageToSend ) { ( void ) ppcMessageToSend; }