URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [WizNET_DEMO_TERN_186/] [serial/] [serial.c] - Rev 599
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ #include <stdlib.h> #include <embedded.h> #include "FreeRTOS.h" #include "portasm.h" #include "queue.h" #include "task.h" #include "semphr.h" #define serMAX_PORTS ( ( unsigned short ) 2 ) #define serPORT_0_INT_REG ( 0xff44 ) #define serPORT_0_BAUD_REG ( 0xff88 ) #define serPORT_0_RX_REG ( 0xff86 ) #define serPORT_0_TX_REG ( 0xff84 ) #define serPORT_0_STATUS_REG ( 0xff82 ) #define serPORT_0_CTRL_REG ( 0xff80 ) #define serPORT_0_IRQ ( 0x14 ) #define serPORT_1_INT_REG ( 0xff42 ) #define serPORT_1_BAUD_REG ( 0xff18 ) #define serPORT_1_RX_REG ( 0xff16 ) #define serPORT_1_TX_REG ( 0xff14 ) #define serPORT_1_STATUS_REG ( 0xff12 ) #define serPORT_1_CTRL_REG ( 0xff10 ) #define serPORT_1_IRQ ( 0x11 ) #define serTX_EMPTY ( ( unsigned short ) 0x40 ) #define serRX_READY ( ( unsigned short ) 0x80 ) #define serRESET_PIC( usEOI_TYPE ) portOUTPUT_WORD( ( unsigned short ) 0xff22, usEOI_TYPE ) #define serTX_HOLD_EMPTY_INT ( ( unsigned short ) 0x100 ) #define serENABLE_INTERRUPTS ( ( unsigned short ) 0x80 ) #define serMODE ( ( unsigned short ) 0x01 ) #define serENABLE_TX_MACHINES ( ( unsigned short ) 0x40 ) #define serENABLE_RX_MACHINES ( ( unsigned short ) 0x20 ) #define serINTERRUPT_MASK ( ( unsigned short ) 0x08 ) #define serCLEAR_ALL_STATUS_BITS ( ( unsigned short ) 0x00 ) #define serINTERRUPT_PRIORITY ( ( unsigned short ) 0x01 ) /*< Just below the scheduler priority. */ #define serDONT_BLOCK ( ( portTickType ) 0 ) typedef enum { serCOM1 = 0, serCOM2, serCOM3, serCOM4, serCOM5, serCOM6, serCOM7, serCOM8 } eCOMPort; typedef enum { serNO_PARITY, serODD_PARITY, serEVEN_PARITY, serMARK_PARITY, serSPACE_PARITY } eParity; typedef enum { serSTOP_1, serSTOP_2 } eStopBits; typedef enum { serBITS_5, serBITS_6, serBITS_7, serBITS_8 } eDataBits; typedef enum { ser50 = 0, ser75, ser110, ser134, ser150, ser200, ser300, ser600, ser1200, ser1800, ser2400, ser4800, ser9600, ser19200, ser38400, ser57600, ser115200 } eBaud; typedef struct xCOM_PORT { /* Hardware parameters for this port. */ short sTxInterruptOn; unsigned short usIntReg; unsigned short usBaudReg; unsigned short usRxReg; unsigned short usTxReg; unsigned short usStatusReg; unsigned short usCtrlReg; unsigned short usIRQVector; /* Queues used for communications with com test task. */ xQueueHandle xRxedChars; xQueueHandle xCharsForTx; /* This semaphore does nothing useful except test a feature of the scheduler. */ xSemaphoreHandle xTestSem; } xComPort; static xComPort xPorts[ serMAX_PORTS ] = { { pdFALSE, serPORT_0_INT_REG, serPORT_0_BAUD_REG, serPORT_0_RX_REG, serPORT_0_TX_REG, serPORT_0_STATUS_REG, serPORT_0_CTRL_REG, serPORT_0_IRQ, NULL, NULL, NULL }, { pdFALSE, serPORT_1_INT_REG, serPORT_1_BAUD_REG, serPORT_1_RX_REG, serPORT_1_TX_REG, serPORT_1_STATUS_REG, serPORT_1_CTRL_REG, serPORT_1_IRQ, NULL, NULL, NULL } }; typedef xComPort * xComPortHandle; /** * Lookup the baud rate from the enum. */ static unsigned long prvBaud( eBaud eWantedBaud ); /* These prototypes are repeated here so we don't have to include the serial header. This allows the xComPortHandle structure details to be private to this file. */ xComPortHandle xSerialPortInit( eCOMPort ePort, eBaud eWantedBaud, eParity eWantedParity, eDataBits eWantedDataBits, eStopBits eWantedStopBits, unsigned portBASE_TYPE uxBufferLength ); portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, char *pcRxedChar, portTickType xBlockTime ); portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, char cOutChar, portTickType xBlockTime ); void vSerialClose( xComPortHandle xPort ); short sSerialWaitForSemaphore( xComPortHandle xPort ); /*-----------------------------------------------------------*/ static short xComPortISR( xComPort * const pxPort ); #define vInterruptOn( pxPort, usInterrupt ) \ { \ unsigned short usIn; \ \ portENTER_CRITICAL(); \ { \ if( pxPort->sTxInterruptOn == pdFALSE ) \ { \ usIn = portINPUT_WORD( pxPort->usCtrlReg ); \ portOUTPUT_WORD( pxPort->usCtrlReg, usIn | usInterrupt ); \ \ pxPort->sTxInterruptOn = pdTRUE; \ } \ } \ portEXIT_CRITICAL(); \ } /*-----------------------------------------------------------*/ #define vInterruptOff( pxPort, usInterrupt ) \ { \ unsigned short usIn = portINPUT_WORD( pxPort->usCtrlReg ); \ if( usIn & usInterrupt ) \ { \ portOUTPUT_WORD( pxPort->usCtrlReg, usIn & ~usInterrupt); \ pxPort->sTxInterruptOn = pdFALSE; \ } \ } /*-----------------------------------------------------------*/ /* Define an interrupt handler for each port */ #define COM_IRQ_WRAPPER(N) \ static void __interrupt COM_IRQ##N##_WRAPPER( void ) \ { \ if( xComPortISR( &( xPorts[##N##] ) ) ) \ { \ portEND_SWITCHING_ISR(); \ } \ } COM_IRQ_WRAPPER( 0 ) COM_IRQ_WRAPPER( 1 ) static pxISR xISRs[ serMAX_PORTS ] = { COM_IRQ0_WRAPPER, COM_IRQ1_WRAPPER }; /*-----------------------------------------------------------*/ static unsigned long prvBaud( eBaud eWantedBaud ) { switch( eWantedBaud ) { case ser50 : return 50UL; case ser75 : return 75UL; case ser110 : return 110UL; case ser134 : return 134UL; case ser150 : return 150UL; case ser200 : return 200UL; case ser300 : return 300UL; case ser600 : return 600UL; case ser1200 : return 1200UL; case ser1800 : return 1800UL; case ser2400 : return 2400UL; case ser4800 : return 4800UL; case ser19200 : return 19200UL; case ser38400 : return 38400UL; case ser57600 : return 57600UL; case ser115200 : return 115200UL; default : return 9600UL; } } /*-----------------------------------------------------------*/ xComPortHandle xSerialPortInit( eCOMPort ePort, eBaud eWantedBaud, eParity eWantedParity, eDataBits eWantedDataBits, eStopBits eWantedStopBits, unsigned portBASE_TYPE uxBufferLength ) { unsigned short usPort; xComPortHandle pxPort = NULL; unsigned long ulBaudDiv; /* BAUDDIV = ( Microprocessor Clock / Baud Rate ) / 16 */ ulBaudDiv = ( configCPU_CLOCK_HZ / prvBaud( eWantedBaud ) ) / 16UL; /* Only n, 8, 1 is supported so these parameters are not required for this port. */ ( void ) eWantedParity; ( void ) eWantedDataBits; ( void ) eWantedStopBits; /* Currently only n,8,1 is supported. */ usPort = ( unsigned short ) ePort; if( usPort < serMAX_PORTS ) { pxPort = &( xPorts[ usPort ] ); portENTER_CRITICAL(); { unsigned short usInWord; /* Create the queues used by the com test task. */ pxPort->xRxedChars = xQueueCreate( uxBufferLength, ( unsigned portBASE_TYPE ) sizeof( char ) ); pxPort->xCharsForTx = xQueueCreate( uxBufferLength, ( unsigned portBASE_TYPE ) sizeof( char ) ); /* Create the test semaphore. This does nothing useful except test a feature of the scheduler. */ vSemaphoreCreateBinary( pxPort->xTestSem ); /* There is no ISR here already to restore later. */ setvect( ( short ) pxPort->usIRQVector, xISRs[ usPort ] ); usInWord = portINPUT_WORD( pxPort->usIntReg ); usInWord &= ~serINTERRUPT_MASK; usInWord |= serINTERRUPT_PRIORITY; portOUTPUT_WORD( pxPort->usIntReg, usInWord ); portOUTPUT_WORD( pxPort->usBaudReg, ( unsigned short ) ulBaudDiv ); portOUTPUT_WORD( pxPort->usCtrlReg, serENABLE_INTERRUPTS | serMODE | serENABLE_TX_MACHINES | serENABLE_RX_MACHINES ); portOUTPUT_WORD( pxPort->usStatusReg, serCLEAR_ALL_STATUS_BITS ); } portEXIT_CRITICAL(); } return pxPort; } /*lint !e715 Some parameters are not used as only a subset of the serial port functionality is currently implemented. */ /*-----------------------------------------------------------*/ void vSerialPutString( xComPortHandle pxPort, const char * const pcString, unsigned short usStringLength ) { unsigned short usByte; char *pcNextChar; pcNextChar = ( char * ) pcString; for( usByte = 0; usByte < usStringLength; usByte++ ) { xQueueSend( pxPort->xCharsForTx, pcNextChar, serDONT_BLOCK ); pcNextChar++; } vInterruptOn( pxPort, serTX_HOLD_EMPTY_INT ); } /*-----------------------------------------------------------*/ portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, char *pcRxedChar, portTickType xBlockTime ) { /* Get the next character from the buffer, note that this routine is only called having checked that the is (at least) one to get */ if( xQueueReceive( pxPort->xRxedChars, pcRxedChar, xBlockTime ) ) { return pdTRUE; } else { return pdFALSE; } } /*-----------------------------------------------------------*/ portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, char cOutChar, portTickType xBlockTime ) { if( xQueueSend( pxPort->xCharsForTx, &cOutChar, xBlockTime ) != pdPASS ) { return pdFAIL; } vInterruptOn( pxPort, serTX_HOLD_EMPTY_INT ); return pdPASS; } /*-----------------------------------------------------------*/ portBASE_TYPE xSerialWaitForSemaphore( xComPortHandle xPort ) { const portTickType xBlockTime = ( portTickType ) 0xffff; /* This function does nothing interesting, but test the semaphore from ISR mechanism. */ return xSemaphoreTake( xPort->xTestSem, xBlockTime ); } /*-----------------------------------------------------------*/ void vSerialClose( xComPortHandle xPort ) { unsigned short usOutput; /* Turn off the interrupts. We may also want to delete the queues and/or re-install the original ISR. */ portENTER_CRITICAL(); { usOutput = portINPUT_WORD( xPort->usCtrlReg ); usOutput &= ~serENABLE_INTERRUPTS; usOutput &= ~serENABLE_TX_MACHINES; usOutput &= ~serENABLE_RX_MACHINES; portOUTPUT_WORD( xPort->usCtrlReg, usOutput ); usOutput = portINPUT_WORD( xPort->usIntReg ); usOutput |= serINTERRUPT_MASK; portOUTPUT_WORD( xPort->usIntReg, usOutput ); } portEXIT_CRITICAL(); } /*-----------------------------------------------------------*/ unsigned short usStatus; static portBASE_TYPE xComPortISR( xComPort * const pxPort ) { unsigned short usStatusRegister; char cChar; portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE; /* NOTE: THIS IS NOT AN EFFICIENT ISR AS IT IS DESIGNED SOLELY TO TEST THE SCHEDULER FUNCTIONALITY. REAL APPLICATIONS SHOULD NOT USE THIS FUNCTION. */ usStatusRegister = portINPUT_WORD( pxPort->usStatusReg ); if( usStatusRegister & serRX_READY ) { cChar = ( char ) portINPUT_WORD( pxPort->usRxReg ); xQueueSendFromISR( pxPort->xRxedChars, &cChar, &xHigherPriorityTaskWoken ); /* Also release the semaphore - this does nothing interesting and is just a test. */ xSemaphoreGiveFromISR( pxPort->xTestSem, &xHigherPriorityTaskWoken ); } else if( pxPort->sTxInterruptOn && ( usStatusRegister & serTX_EMPTY ) ) { if( xQueueReceiveFromISR( pxPort->xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE ) { portOUTPUT_WORD( pxPort->usTxReg, ( unsigned short ) cChar ); } else { /* Queue empty, nothing to send */ vInterruptOff( pxPort, serTX_HOLD_EMPTY_INT ); } } serRESET_PIC( pxPort->usIRQVector ); /* If posting to the queue woke a task that was blocked on the queue we may want to switch to the woken task - depending on its priority relative to the task interrupted by this ISR. */ return xHigherPriorityTaskWoken; }
Go to most recent revision | Compare with Previous | Blame | View Log