URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [lwIP_AVR32_UC3/] [AT32UC3A/] [GCC/] [config.mk] - Rev 583
Compare with Previous | Blame | View Log
# Hey Emacs, this is a -*- makefile -*-
# The purpose of this file is to define the build configuration variables used
# by the generic Makefile. See Makefile header for further information.
# Copyright (c) 2007, Atmel Corporation All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation and/
# or other materials provided with the distribution.
#
# 3. The name of ATMEL may not be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
# SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
# OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Base paths
PRJ_PATH = ../..
APPS_PATH = $(PRJ_PATH)/APPLICATIONS
BRDS_PATH = $(PRJ_PATH)/BOARDS
COMP_PATH = $(PRJ_PATH)/COMPONENTS
DRVR_PATH = $(PRJ_PATH)/DRIVERS
SERV_PATH = $(PRJ_PATH)/SERVICES
UTIL_PATH = $(PRJ_PATH)/UTILS
# Demo paths
FREERTOS_PATH = ../../../..
FREERTOS_PORT_PATH = $(FREERTOS_PATH)/Source/portable/GCC/AVR32_UC3
FREERTOS_MEM_PATH = $(FREERTOS_PATH)/Source/portable/MemMang
DEMO_PATH = ../..
ETH_PATH = $(DEMO_PATH)/NETWORK
WEB_PATH = $(ETH_PATH)/BasicWEB
TFTP_PATH = $(ETH_PATH)/BasicTFTP
SMTP_PATH = $(ETH_PATH)/BasicSMTP
LWIP_PATH = $(FREERTOS_PATH)/Demo/Common/ethernet/lwIP
LWIP_PORT_PATH = $(ETH_PATH)/lwip-port/AT32UC3A
# CPU architecture: {ap|uc}
ARCH = uc
# Part: {none|ap7xxx|uc3xxxxx}
PART = uc3a0512
# Flash memories: [{cfi|internal}@address,size]...
FLASH = internal@0x80000000,512Kb
# Clock source to use when programming: [{xtal|extclk|int}]
PROG_CLOCK = xtal
# Device/Platform/Board include path
PLATFORM_INC_PATH = \
$(BRDS_PATH)/
# Target name: {*.a|*.elf}
TARGET = $(PART)-lwipdemo.elf
# Definitions: [-D name[=definition]...] [-U name...]
# Things that might be added to DEFS:
# BOARD Board used: {EVKxxxx}
# EXT_BOARD Extension board used (if any): {EXTxxxx}
DEFS = -D BOARD=EVK1100 -D FREERTOS_USED -D HTTP_USED=1 -D TFTP_USED=1 -D SMTP_USED=0
# Include path
INC_PATH = \
$(UTIL_PATH)/ \
$(UTIL_PATH)/PREPROCESSOR/ \
$(SERV_PATH)/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/ \
$(DRVR_PATH)/INTC/ \
$(DRVR_PATH)/TC/ \
$(DRVR_PATH)/PM/ \
$(DRVR_PATH)/GPIO/ \
$(DRVR_PATH)/FLASHC/ \
$(DRVR_PATH)/MACB/ \
$(DEMO_PATH)/ \
$(FREERTOS_PATH)/Source/include/ \
$(FREERTOS_PATH)/Demo/Common/include/ \
$(FREERTOS_PORT_PATH)/ \
$(FREERTOS_MEM_PATH)/ \
$(ETH_PATH)/ \
$(LWIP_PATH)/include/ \
$(LWIP_PATH)/include/ipv4/ \
$(LWIP_PORT_PATH)/ \
$(WEB_PATH)/ \
$(TFTP_PATH)/ \
$(SMTP_PATH)/
# C source files
LWIP_SRC = \
$(LWIP_PATH)/core/inet.c \
$(LWIP_PATH)/core/mem.c \
$(LWIP_PATH)/core/memp.c \
$(LWIP_PATH)/core/netif.c \
$(LWIP_PATH)/core/pbuf.c \
$(LWIP_PATH)/core/raw.c \
$(LWIP_PATH)/core/stats.c \
$(LWIP_PATH)/core/sys.c \
$(LWIP_PATH)/core/tcp.c \
$(LWIP_PATH)/core/tcp_in.c \
$(LWIP_PATH)/core/tcp_out.c \
$(LWIP_PATH)/core/ipv4/ip.c \
$(LWIP_PATH)/core/ipv4/ip_addr.c \
$(LWIP_PATH)/core/ipv4/icmp.c \
$(LWIP_PATH)/api/sockets.c \
$(LWIP_PATH)/api/tcpip.c \
$(LWIP_PATH)/api/api_msg.c \
$(LWIP_PATH)/api/err.c \
$(LWIP_PATH)/api/api_lib.c \
$(LWIP_PATH)/netif/etharp.c \
$(LWIP_PATH)/core/udp.c \
$(LWIP_PATH)/core/ipv4/ip_frag.c
CSRCS = \
$(BRDS_PATH)/EVK1100/led.c \
$(DRVR_PATH)/INTC/intc.c \
$(DRVR_PATH)/TC/tc.c \
$(DRVR_PATH)/PM/pm.c \
$(DRVR_PATH)/MACB/macb.c \
$(DRVR_PATH)/GPIO/gpio.c \
$(DRVR_PATH)/FLASHC/flashc.c \
$(DEMO_PATH)/main.c \
$(DEMO_PATH)/PARTEST/ParTest.c \
$(DEMO_PATH)/SERIAL/serial.c \
$(FREERTOS_PATH)/Source/tasks.c \
$(FREERTOS_PATH)/Source/queue.c \
$(FREERTOS_PATH)/Source/list.c \
$(FREERTOS_PATH)/Source/croutine.c \
$(FREERTOS_PATH)/Demo/Common/Minimal/flash.c \
$(FREERTOS_PORT_PATH)/port.c \
$(FREERTOS_MEM_PATH)/heap_3.c \
$(LWIP_SRC) \
$(LWIP_PORT_PATH)/sys_arch.c \
$(LWIP_PORT_PATH)/ethernetif.c \
$(WEB_PATH)/BasicWEB.c \
$(TFTP_PATH)/BasicTFTP.c \
$(SMTP_PATH)/BasicSMTP.c \
$(ETH_PATH)/ethernet.c \
$(DEMO_PATH)/printf-stdarg.c
# Assembler source files
ASSRCS = \
$(SERV_PATH)/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.S \
$(FREERTOS_PORT_PATH)/exception.S
# Library path
LIB_PATH =
# Libraries to link with the project
LIBS =
# Linker script file if any
LINKER_SCRIPT = $(UTIL_PATH)/LINKER_SCRIPTS/AT32UC3A/0512/GCC/link_uc3a0512.lds
# Options to request or suppress warnings: [-fsyntax-only] [-pedantic[-errors]] [-w] [-Wwarning...]
# For further details, refer to the chapter "GCC Command Options" of the GCC manual.
WARNINGS = -Wall
# Options for debugging: [-g]...
# For further details, refer to the chapter "GCC Command Options" of the GCC manual.
DEBUG = -g
# Options that control optimization: [-O[0|1|2|3|s]]...
# For further details, refer to the chapter "GCC Command Options" of the GCC manual.
OPTIMIZATION = -O0 -ffunction-sections -fdata-sections
# Extra flags to use when preprocessing
CPP_EXTRA_FLAGS =
# Extra flags to use when compiling
C_EXTRA_FLAGS =
# Extra flags to use when assembling
AS_EXTRA_FLAGS =
# Extra flags to use when linking
LD_EXTRA_FLAGS = -Wl,--gc-sections -Wl,-e,_trampoline
# Documentation path
DOC_PATH = ./DOC/
# Documentation configuration file
DOC_CFG = ./doxyfile.doxygen