URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [lwIP_AVR32_UC3/] [DRIVERS/] [FLASHC/] [flashc.h] - Rev 594
Go to most recent revision | Compare with Previous | Blame | View Log
/*This file is prepared for Doxygen automatic documentation generation.*/ /*! \file ********************************************************************* * * \brief FLASHC driver for AVR32 UC3. * * AVR32 Flash Controller driver module. * * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 * - Supported devices: All AVR32 devices with a FLASHC module can be used. * - AppNote: * * \author Atmel Corporation: http://www.atmel.com \n * Support and FAQ: http://support.atmel.no/ * ******************************************************************************/ /* Copyright (c) 2007, Atmel Corporation All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3. The name of ATMEL may not be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _FLASHC_H_ #define _FLASHC_H_ #include <avr32/io.h> #include <stddef.h> #include "compiler.h" //! Number of flash regions defined by the FLASHC. #define AVR32_FLASHC_REGIONS (AVR32_FLASHC_FLASH_SIZE /\ (AVR32_FLASHC_PAGES_PR_REGION * AVR32_FLASHC_PAGE_SIZE)) /*! \name Flash Properties */ //! @{ /*! \brief Gets the size of the whole flash array. * * \return The size of the whole flash array in bytes. */ extern unsigned int flashc_get_flash_size(void); /*! \brief Gets the total number of pages in the flash array. * * \return The total number of pages in the flash array. */ extern unsigned int flashc_get_page_count(void); /*! \brief Gets the number of pages in each flash region. * * \return The number of pages in each flash region. */ extern unsigned int flashc_get_page_count_per_region(void); /*! \brief Gets the region number of a page. * * \param page_number The page number: * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within * the flash array; * \arg <tt>< 0</tt>: the current page number. * * \return The region number of the specified page. */ extern unsigned int flashc_get_page_region(int page_number); /*! \brief Gets the number of the first page of a region. * * \param region The region number: \c 0 to <tt>(AVR32_FLASHC_REGIONS - 1)</tt>. * * \return The number of the first page of the specified region. */ extern unsigned int flashc_get_region_first_page_number(unsigned int region); //! @} /*! \name FLASHC Control */ //! @{ /*! \brief Gets the number of wait states of flash read accesses. * * \return The number of wait states of flash read accesses. */ extern unsigned int flashc_get_wait_state(void); /*! \brief Sets the number of wait states of flash read accesses. * * \param wait_state The number of wait states of flash read accesses: \c 0 to * \c 1. */ extern void flashc_set_wait_state(unsigned int wait_state); /*! \brief Tells whether the Flash Ready interrupt is enabled. * * \return Whether the Flash Ready interrupt is enabled. */ extern Bool flashc_is_ready_int_enabled(void); /*! \brief Enables or disables the Flash Ready interrupt. * * \param enable Whether to enable the Flash Ready interrupt: \c TRUE or * \c FALSE. */ extern void flashc_enable_ready_int(Bool enable); /*! \brief Tells whether the Lock Error interrupt is enabled. * * \return Whether the Lock Error interrupt is enabled. */ extern Bool flashc_is_lock_error_int_enabled(void); /*! \brief Enables or disables the Lock Error interrupt. * * \param enable Whether to enable the Lock Error interrupt: \c TRUE or * \c FALSE. */ extern void flashc_enable_lock_error_int(Bool enable); /*! \brief Tells whether the Programming Error interrupt is enabled. * * \return Whether the Programming Error interrupt is enabled. */ extern Bool flashc_is_prog_error_int_enabled(void); /*! \brief Enables or disables the Programming Error interrupt. * * \param enable Whether to enable the Programming Error interrupt: \c TRUE or * \c FALSE. */ extern void flashc_enable_prog_error_int(Bool enable); //! @} /*! \name FLASHC Status */ //! @{ /*! \brief Tells whether the FLASHC is ready to run a new command. * * \return Whether the FLASHC is ready to run a new command. */ extern Bool flashc_is_ready(void); /*! \brief Waits actively until the FLASHC is ready to run a new command. * * This is the default function assigned to \ref flashc_wait_until_ready. */ extern void flashc_default_wait_until_ready(void); //! Pointer to the function used by the driver when it needs to wait until the //! FLASHC is ready to run a new command. //! The default function is \ref flashc_default_wait_until_ready. //! The user may change this pointer to use another implementation. extern void (*volatile flashc_wait_until_ready)(void); /*! \brief Tells whether a Lock Error has occurred during the last function * called that issued one or more FLASHC commands. * * \return Whether a Lock Error has occurred during the last function called * that issued one or more FLASHC commands. */ extern Bool flashc_is_lock_error(void); /*! \brief Tells whether a Programming Error has occurred during the last * function called that issued one or more FLASHC commands. * * \return Whether a Programming Error has occurred during the last function * called that issued one or more FLASHC commands. */ extern Bool flashc_is_programming_error(void); //! @} /*! \name FLASHC Command Control */ //! @{ /*! \brief Gets the last issued FLASHC command. * * \return The last issued FLASHC command. */ extern unsigned int flashc_get_command(void); /*! \brief Gets the current FLASHC page number. * * \return The current FLASHC page number. */ extern unsigned int flashc_get_page_number(void); /*! \brief Issues a FLASHC command. * * \param command The command: \c AVR32_FLASHC_FCMD_CMD_x. * \param page_number The page number to apply the command to: * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within * the flash array; * \arg <tt>< 0</tt>: use this to apply the command to the current page number * or if the command does not apply to any page number; * \arg this argument may have other meanings according to the command. See * the FLASHC chapter of the MCU datasheet. * * \warning A Lock Error is issued if the command violates the protection * mechanism. * * \warning A Programming Error is issued if the command is invalid. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_issue_command(unsigned int command, int page_number); //! @} /*! \name FLASHC Global Commands */ //! @{ /*! \brief Issues a No Operation command to the FLASHC. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_no_operation(void); /*! \brief Issues an Erase All command to the FLASHC. * * This command erases all bits in the flash array, the general-purpose fuse * bits and the Security bit. The User page is not erased. * * This command also ensures that all volatile memories, such as register file * and RAMs, are erased before the Security bit is erased, i.e. deactivated. * * \warning A Lock Error is issued if at least one region is locked or the * bootloader protection is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note An erase operation can only set bits. */ extern void flashc_erase_all(void); //! @} /*! \name FLASHC Protection Mechanisms */ //! @{ /*! \brief Tells whether the Security bit is active. * * \return Whether the Security bit is active. */ extern Bool flashc_is_security_bit_active(void); /*! \brief Activates the Security bit. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_activate_security_bit(void); /*! \brief Gets the bootloader protected size. * * \return The bootloader protected size in bytes. */ extern unsigned int flashc_get_bootloader_protected_size(void); /*! \brief Sets the bootloader protected size. * * \param bootprot_size The wanted bootloader protected size in bytes. If this * size is not supported, the actual size will be the * nearest greater available size or the maximal possible * size if the requested size is too large. * * \return The actual bootloader protected size in bytes. * * \warning A Lock Error is issued if the Security bit is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern unsigned int flashc_set_bootloader_protected_size(unsigned int bootprot_size); /*! \brief Tells whether external privileged fetch is locked. * * \return Whether external privileged fetch is locked. */ extern Bool flashc_is_external_privileged_fetch_locked(void); /*! \brief Locks or unlocks external privileged fetch. * * \param lock Whether to lock external privileged fetch: \c TRUE or \c FALSE. * * \warning A Lock Error is issued if the Security bit is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_lock_external_privileged_fetch(Bool lock); /*! \brief Tells whether the region of a page is locked. * * \param page_number The page number: * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within * the flash array; * \arg <tt>< 0</tt>: the current page number. * * \return Whether the region of the specified page is locked. */ extern Bool flashc_is_page_region_locked(int page_number); /*! \brief Tells whether a region is locked. * * \param region The region number: \c 0 to <tt>(AVR32_FLASHC_REGIONS - 1)</tt>. * * \return Whether the specified region is locked. */ extern Bool flashc_is_region_locked(unsigned int region); /*! \brief Locks or unlocks the region of a page. * * \param page_number The page number: * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within * the flash array; * \arg <tt>< 0</tt>: the current page number. * \param lock Whether to lock the region of the specified page: \c TRUE or * \c FALSE. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_lock_page_region(int page_number, Bool lock); /*! \brief Locks or unlocks a region. * * \param region The region number: \c 0 to <tt>(AVR32_FLASHC_REGIONS - 1)</tt>. * \param lock Whether to lock the specified region: \c TRUE or \c FALSE. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_lock_region(unsigned int region, Bool lock); /*! \brief Locks or unlocks all regions. * * \param lock Whether to lock the regions: \c TRUE or \c FALSE. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_lock_all_regions(Bool lock); //! @} /*! \name Access to General-Purpose Fuses */ //! @{ /*! \brief Reads a general-purpose fuse bit. * * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 31. * * \return The value of the specified general-purpose fuse bit. */ extern Bool flashc_read_gp_fuse_bit(unsigned int gp_fuse_bit); /*! \brief Reads a general-purpose fuse bit-field. * * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to * \c 31. * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to * \c 32. * * \return The value of the specified general-purpose fuse bit-field. */ extern U32 flashc_read_gp_fuse_bitfield(unsigned int pos, unsigned int width); /*! \brief Reads a general-purpose fuse byte. * * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 3. * * \return The value of the specified general-purpose fuse byte. */ extern U8 flashc_read_gp_fuse_byte(unsigned int gp_fuse_byte); /*! \brief Reads all general-purpose fuses. * * \return The value of all general-purpose fuses as a word. */ extern U32 flashc_read_all_gp_fuses(void); /*! \brief Erases a general-purpose fuse bit. * * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 31. * \param check Whether to check erase: \c TRUE or \c FALSE. * * \return Whether the erase succeeded or always \c TRUE if erase check was not * requested. * * \warning A Lock Error is issued if the Security bit is active and the command * is applied to BOOTPROT or EPFL fuses. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note An erase operation can only set bits. */ extern Bool flashc_erase_gp_fuse_bit(unsigned int gp_fuse_bit, Bool check); /*! \brief Erases a general-purpose fuse bit-field. * * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to * \c 31. * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to * \c 32. * \param check Whether to check erase: \c TRUE or \c FALSE. * * \return Whether the erase succeeded or always \c TRUE if erase check was not * requested. * * \warning A Lock Error is issued if the Security bit is active and the command * is applied to BOOTPROT or EPFL fuses. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note An erase operation can only set bits. */ extern Bool flashc_erase_gp_fuse_bitfield(unsigned int pos, unsigned int width, Bool check); /*! \brief Erases a general-purpose fuse byte. * * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 3. * \param check Whether to check erase: \c TRUE or \c FALSE. * * \return Whether the erase succeeded or always \c TRUE if erase check was not * requested. * * \warning A Lock Error is issued if the Security bit is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note An erase operation can only set bits. */ extern Bool flashc_erase_gp_fuse_byte(unsigned int gp_fuse_byte, Bool check); /*! \brief Erases all general-purpose fuses. * * \param check Whether to check erase: \c TRUE or \c FALSE. * * \return Whether the erase succeeded or always \c TRUE if erase check was not * requested. * * \warning A Lock Error is issued if the Security bit is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note An erase operation can only set bits. */ extern Bool flashc_erase_all_gp_fuses(Bool check); /*! \brief Writes a general-purpose fuse bit. * * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 31. * \param value The value of the specified general-purpose fuse bit. * * \warning A Lock Error is issued if the Security bit is active and the command * is applied to BOOTPROT or EPFL fuses. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note A write operation can only clear bits. */ extern void flashc_write_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value); /*! \brief Writes a general-purpose fuse bit-field. * * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to * \c 31. * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to * \c 32. * \param value The value of the specified general-purpose fuse bit-field. * * \warning A Lock Error is issued if the Security bit is active and the command * is applied to BOOTPROT or EPFL fuses. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note A write operation can only clear bits. */ extern void flashc_write_gp_fuse_bitfield(unsigned int pos, unsigned int width, U32 value); /*! \brief Writes a general-purpose fuse byte. * * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 3. * \param value The value of the specified general-purpose fuse byte. * * \warning A Lock Error is issued if the Security bit is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note A write operation can only clear bits. */ extern void flashc_write_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value); /*! \brief Writes all general-purpose fuses. * * \param value The value of all general-purpose fuses as a word. * * \warning A Lock Error is issued if the Security bit is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note A write operation can only clear bits. */ extern void flashc_write_all_gp_fuses(U32 value); /*! \brief Sets a general-purpose fuse bit with the appropriate erase and write * operations. * * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 31. * \param value The value of the specified general-purpose fuse bit. * * \warning A Lock Error is issued if the Security bit is active and the command * is applied to BOOTPROT or EPFL fuses. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_set_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value); /*! \brief Sets a general-purpose fuse bit-field with the appropriate erase and * write operations. * * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to * \c 31. * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to * \c 32. * \param value The value of the specified general-purpose fuse bit-field. * * \warning A Lock Error is issued if the Security bit is active and the command * is applied to BOOTPROT or EPFL fuses. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_set_gp_fuse_bitfield(unsigned int pos, unsigned int width, U32 value); /*! \brief Sets a general-purpose fuse byte with the appropriate erase and write * operations. * * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 3. * \param value The value of the specified general-purpose fuse byte. * * \warning A Lock Error is issued if the Security bit is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_set_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value); /*! \brief Sets all general-purpose fuses with the appropriate erase and write * operations. * * \param value The value of all general-purpose fuses as a word. * * \warning A Lock Error is issued if the Security bit is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_set_all_gp_fuses(U32 value); //! @} /*! \name Access to Flash Pages */ //! @{ /*! \brief Clears the page buffer. * * This command resets all bits in the page buffer to one. Write accesses to the * page buffer can only change page buffer bits from one to zero. * * \warning The page buffer is not automatically reset after a page write. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern void flashc_clear_page_buffer(void); /*! \brief Tells whether the page to which the last Quick Page Read command was * applied was erased. * * \return Whether the page to which the last Quick Page Read command was * applied was erased. */ extern Bool flashc_is_page_erased(void); /*! \brief Applies the Quick Page Read command to a page. * * \param page_number The page number: * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within * the flash array; * \arg <tt>< 0</tt>: the current page number. * * \return Whether the specified page is erased. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern Bool flashc_quick_page_read(int page_number); /*! \brief Erases a page. * * \param page_number The page number: * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within * the flash array; * \arg <tt>< 0</tt>: the current page number. * \param check Whether to check erase: \c TRUE or \c FALSE. * * \return Whether the erase succeeded or always \c TRUE if erase check was not * requested. * * \warning A Lock Error is issued if the command is applied to a page belonging * to a locked region or to the bootloader protected area. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note An erase operation can only set bits. */ extern Bool flashc_erase_page(int page_number, Bool check); /*! \brief Erases all pages within the flash array. * * \param check Whether to check erase: \c TRUE or \c FALSE. * * \return Whether the erase succeeded or always \c TRUE if erase check was not * requested. * * \warning A Lock Error is issued if at least one region is locked or the * bootloader protection is active. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note An erase operation can only set bits. */ extern Bool flashc_erase_all_pages(Bool check); /*! \brief Writes a page from the page buffer. * * \param page_number The page number: * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within * the flash array; * \arg <tt>< 0</tt>: the current page number. * * \warning A Lock Error is issued if the command is applied to a page belonging * to a locked region or to the bootloader protected area. * * \warning The page buffer is not automatically reset after a page write. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note A write operation can only clear bits. */ extern void flashc_write_page(int page_number); /*! \brief Checks whether the User page is erased. * * \return Whether the User page is erased. */ extern Bool flashc_check_user_page_erase(void); /*! \brief Erases the User page. * * \param check Whether to check erase: \c TRUE or \c FALSE. * * \return Whether the erase succeeded or always \c TRUE if erase check was not * requested. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note An erase operation can only set bits. */ extern Bool flashc_erase_user_page(Bool check); /*! \brief Writes the User page from the page buffer. * * \warning The page buffer is not automatically reset after a page write. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. * * \note A write operation can only clear bits. */ extern void flashc_write_user_page(void); /*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst * from the repeated \a src source byte. * * The destination areas that are not within the flash array or the User page * are ignored. * * All pointer and size alignments are supported. * * \param dst Pointer to flash destination. * \param src Source byte. * \param nbytes Number of bytes to set. * \param erase Whether to erase before writing: \c TRUE or \c FALSE. * * \return The value of \a dst. * * \warning A Lock Error is issued if the command is applied to pages belonging * to a locked region or to the bootloader protected area. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern volatile void *flashc_memset8(volatile void *dst, U8 src, size_t nbytes, Bool erase); /*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst * from the repeated \a src big-endian source half-word. * * The destination areas that are not within the flash array or the User page * are ignored. * * All pointer and size alignments are supported. * * \param dst Pointer to flash destination. * \param src Source half-word. * \param nbytes Number of bytes to set. * \param erase Whether to erase before writing: \c TRUE or \c FALSE. * * \return The value of \a dst. * * \warning A Lock Error is issued if the command is applied to pages belonging * to a locked region or to the bootloader protected area. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern volatile void *flashc_memset16(volatile void *dst, U16 src, size_t nbytes, Bool erase); /*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst * from the repeated \a src big-endian source word. * * The destination areas that are not within the flash array or the User page * are ignored. * * All pointer and size alignments are supported. * * \param dst Pointer to flash destination. * \param src Source word. * \param nbytes Number of bytes to set. * \param erase Whether to erase before writing: \c TRUE or \c FALSE. * * \return The value of \a dst. * * \warning A Lock Error is issued if the command is applied to pages belonging * to a locked region or to the bootloader protected area. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern volatile void *flashc_memset32(volatile void *dst, U32 src, size_t nbytes, Bool erase); /*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst * from the repeated \a src big-endian source double-word. * * The destination areas that are not within the flash array or the User page * are ignored. * * All pointer and size alignments are supported. * * \param dst Pointer to flash destination. * \param src Source double-word. * \param nbytes Number of bytes to set. * \param erase Whether to erase before writing: \c TRUE or \c FALSE. * * \return The value of \a dst. * * \warning A Lock Error is issued if the command is applied to pages belonging * to a locked region or to the bootloader protected area. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern volatile void *flashc_memset64(volatile void *dst, U64 src, size_t nbytes, Bool erase); /*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst * from the repeated \a src big-endian source pattern. * * The destination areas that are not within the flash array or the User page * are ignored. * * All pointer and size alignments are supported. * * \param dst Pointer to flash destination. * \param src Source double-word. * \param src_width \a src width in bits: 8, 16, 32 or 64. * \param nbytes Number of bytes to set. * \param erase Whether to erase before writing: \c TRUE or \c FALSE. * * \return The value of \a dst. * * \warning A Lock Error is issued if the command is applied to pages belonging * to a locked region or to the bootloader protected area. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ #define flashc_memset(dst, src, src_width, nbytes, erase) \ TPASTE2(flashc_memset, src_width)((dst), (src), (nbytes), (erase)) /*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst * from the source pointed to by \a src. * * The destination areas that are not within the flash array or the User page * are ignored. * * All pointer and size alignments are supported. * * \param dst Pointer to flash destination. * \param src Pointer to source data. * \param nbytes Number of bytes to copy. * \param erase Whether to erase before writing: \c TRUE or \c FALSE. * * \return The value of \a dst. * * \warning If copying takes place between areas that overlap, the behavior is * undefined. * * \warning A Lock Error is issued if the command is applied to pages belonging * to a locked region or to the bootloader protected area. * * \note The FLASHC error status returned by \ref flashc_is_lock_error and * \ref flashc_is_programming_error is updated. */ extern volatile void *flashc_memcpy(volatile void *dst, const void *src, size_t nbytes, Bool erase); //! @} #endif // _FLASHC_H_
Go to most recent revision | Compare with Previous | Blame | View Log