URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [lwIP_AVR32_UC3/] [DRIVERS/] [GPIO/] [gpio.h] - Rev 585
Go to most recent revision | Compare with Previous | Blame | View Log
/*This file has been prepared for Doxygen automatic documentation generation.*/ /*! \file ********************************************************************* * * \brief GPIO header for AVR32 UC3. * * This file contains basic GPIO driver functions. * * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 * - Supported devices: All AVR32 devices with a GPIO module can be used. * - AppNote: * * \author Atmel Corporation: http://www.atmel.com \n * Support and FAQ: http://support.atmel.no/ * *****************************************************************************/ /* Copyright (c) 2007, Atmel Corporation All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3. The name of ATMEL may not be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _GPIO_H_ #define _GPIO_H_ #include <avr32/io.h> /*! \name Return Values of the GPIO API */ //! @{ #define GPIO_SUCCESS 0 //!< Function successfully completed. #define GPIO_INVALID_ARGUMENT 1 //!< Input parameters are out of range. //! @} /*! \name Interrupt Trigger Modes */ //! @{ #define GPIO_PIN_CHANGE 0 //!< Interrupt triggered upon pin change. #define GPIO_RISING_EDGE 1 //!< Interrupt triggered upon rising edge. #define GPIO_FALLING_EDGE 2 //!< Interrupt triggered upon falling edge. //! @} //! A type definition of pins and modules connectivity. typedef struct { unsigned char pin; //!< Module pin. unsigned char function; //!< Module function. } gpio_map_t[]; /*! \brief Enables specific module modes for a set of pins. * * \param gpiomap The pin map. * \param size The number of pins in \a gpiomap. * * \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT. */ extern int gpio_enable_module(const gpio_map_t gpiomap, unsigned int size); /*! \brief Enables a specific module mode for a pin. * * \param pin The pin number.\n * Refer to the product header file `uc3x.h' (where x is the part * number; e.g. x = a0512) for module pins. E.g., to enable a PWM * channel output, the pin number can be AVR32_PWM_PWM_3_PIN for PWM * channel 3. * \param function The pin function.\n * Refer to the product header file `uc3x.h' (where x is the * part number; e.g. x = a0512) for module pin functions. E.g., * to enable a PWM channel output, the pin function can be * AVR32_PWM_PWM_3_FUNCTION for PWM channel 3. * * \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT. */ extern int gpio_enable_module_pin(unsigned int pin, unsigned int function); /*! \brief Enables the GPIO mode of a set of pins. * * \param gpiomap The pin map. * \param size The number of pins in \a gpiomap. */ extern void gpio_enable_gpio(const gpio_map_t gpiomap, unsigned int size); /*! \brief Enables the GPIO mode of a pin. * * \param pin The pin number.\n * Refer to the product header file `uc3x.h' (where x is the part * number; e.g. x = a0512) for pin definitions. E.g., to enable the * GPIO mode of PX21, AVR32_PIN_PX21 can be used. Module pins such as * AVR32_PWM_PWM_3_PIN for PWM channel 3 can also be used to release * module pins for GPIO. */ extern void gpio_enable_gpio_pin(unsigned int pin); /*! \brief Enables the open-drain mode of a pin. * * \param pin The pin number. */ extern void gpio_enable_pin_open_drain(unsigned int pin); /*! \brief Disables the open-drain mode of a pin. * * \param pin The pin number. */ extern void gpio_disable_pin_open_drain(unsigned int pin); /*! \brief Enables the pull-up resistor of a pin. * * \param pin The pin number. */ extern void gpio_enable_pin_pull_up(unsigned int pin); /*! \brief Disables the pull-up resistor of a pin. * * \param pin The pin number. */ extern void gpio_disable_pin_pull_up(unsigned int pin); /*! \brief Returns the value of a pin. * * \param pin The pin number. * * \return The pin value. */ extern int gpio_get_pin_value(unsigned int pin); /*! \brief Returns the output value set for a GPIO pin. * * \param pin The pin number. * * \return The pin output value. */ extern int gpio_get_gpio_pin_output_value(unsigned int pin); /*! \brief Drives a GPIO pin to 1. * * \param pin The pin number. */ extern void gpio_set_gpio_pin(unsigned int pin); /*! \brief Drives a GPIO pin to 0. * * \param pin The pin number. */ extern void gpio_clr_gpio_pin(unsigned int pin); /*! \brief Toggles a GPIO pin. * * \param pin The pin number. */ extern void gpio_tgl_gpio_pin(unsigned int pin); /*! \brief Enables the glitch filter of a pin. * * When the glitch filter is enabled, a glitch with duration of less than 1 * clock cycle is automatically rejected, while a pulse with duration of 2 clock * cycles or more is accepted. For pulse durations between 1 clock cycle and 2 * clock cycles, the pulse may or may not be taken into account, depending on * the precise timing of its occurrence. Thus for a pulse to be guaranteed * visible it must exceed 2 clock cycles, whereas for a glitch to be reliably * filtered out, its duration must not exceed 1 clock cycle. The filter * introduces 2 clock cycles latency. * * \param pin The pin number. */ extern void gpio_enable_pin_glitch_filter(unsigned int pin); /*! \brief Disables the glitch filter of a pin. * * \param pin The pin number. */ extern void gpio_disable_pin_glitch_filter(unsigned int pin); /*! \brief Enables the interrupt of a pin with the specified settings. * * \param pin The pin number. * \param mode The trigger mode (\ref GPIO_PIN_CHANGE, \ref GPIO_RISING_EDGE or * \ref GPIO_FALLING_EDGE). * * \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT. */ extern int gpio_enable_pin_interrupt(unsigned int pin, unsigned int mode); /*! \brief Disables the interrupt of a pin. * * \param pin The pin number. */ extern void gpio_disable_pin_interrupt(unsigned int pin); /*! \brief Gets the interrupt flag of a pin. * * \param pin The pin number. * * \return The pin interrupt flag. */ extern int gpio_get_pin_interrupt_flag(unsigned int pin); /*! \brief Clears the interrupt flag of a pin. * * \param pin The pin number. */ extern void gpio_clear_pin_interrupt_flag(unsigned int pin); #endif // _GPIO_H_
Go to most recent revision | Compare with Previous | Blame | View Log