Subversion Repositories openrisc

/*This file has been prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
 *
 * \brief ethernet management for AVR32 UC3.
 *
 * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
 * - Supported devices:  All AVR32 devices can be used.
 * - AppNote:
 *
 * \author               Atmel Corporation: http://www.atmel.com \n
 *                       Support and FAQ: http://support.atmel.no/
 *
 *****************************************************************************/
 
/* Copyright (c) 2007, Atmel Corporation All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * 3. The name of ATMEL may not be used to endorse or promote products derived
 * from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
 * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
 
 
 
#include <string.h>
 
#include "conf_eth.h"
 
/* Scheduler include files. */
#include "FreeRTOS.h"
#include "task.h"
 
/* Demo program include files. */
#include "partest.h"
#include "serial.h"
 
 
/* ethernet includes */
#include "ethernet.h"
#include "conf_eth.h"
#include "macb.h"
#include "gpio.h"
 
#if (HTTP_USED == 1)
  #include "BasicWEB.h"
#endif
 
#if (TFTP_USED == 1)
  #include "BasicTFTP.h"
#endif
 
#if (SMTP_USED == 1)
  #include "BasicSMTP.h"
#endif
 
/* lwIP includes */
#include "lwip/sys.h"
#include "lwip/api.h" 
#include "lwip/tcpip.h"
#include "lwip/memp.h" 
#include "lwip/stats.h"
#include "netif/loopif.h"
 
 
//_____ M A C R O S ________________________________________________________
 
 
//_____ D E F I N I T I O N S ______________________________________________
 
/* global variable containing MAC Config (hw addr, IP, GW, ...) */
struct netif MACB_if;
 
//_____ D E C L A R A T I O N S ____________________________________________
 
/* Initialisation required by lwIP. */
static void prvlwIPInit( void );
 
/* Initialisation of ethernet interfaces by reading config file */
static void prvEthernetConfigureInterface(void * param);
 
 
/*! \brief create ethernet task, for ethernet management.
 *
 *  \param uxPriority   Input. priority for the task, it should be low
 *
 */
void vStartEthernetTask( unsigned portBASE_TYPE uxPriority )
{
static const gpio_map_t MACB_GPIO_MAP =
{
  {AVR32_MACB_MDC_0_PIN,    AVR32_MACB_MDC_0_FUNCTION   },
  {AVR32_MACB_MDIO_0_PIN,   AVR32_MACB_MDIO_0_FUNCTION  },
  {AVR32_MACB_RXD_0_PIN,    AVR32_MACB_RXD_0_FUNCTION   },
  {AVR32_MACB_TXD_0_PIN,    AVR32_MACB_TXD_0_FUNCTION   },
  {AVR32_MACB_RXD_1_PIN,    AVR32_MACB_RXD_1_FUNCTION   },
  {AVR32_MACB_TXD_1_PIN,    AVR32_MACB_TXD_1_FUNCTION   },
  {AVR32_MACB_TX_EN_0_PIN,  AVR32_MACB_TX_EN_0_FUNCTION },
  {AVR32_MACB_RX_ER_0_PIN,  AVR32_MACB_RX_ER_0_FUNCTION },
  {AVR32_MACB_RX_DV_0_PIN,  AVR32_MACB_RX_DV_0_FUNCTION },
  {AVR32_MACB_TX_CLK_0_PIN, AVR32_MACB_TX_CLK_0_FUNCTION}
};
 
  // Assign GPIO to MACB
  gpio_enable_module(MACB_GPIO_MAP, sizeof(MACB_GPIO_MAP) / sizeof(MACB_GPIO_MAP[0]));
 
  /* Setup lwIP. */
  prvlwIPInit();
 
#if (HTTP_USED == 1)
  /* Create the WEB server task.  This uses the lwIP RTOS abstraction layer.*/
  sys_thread_new( vBasicWEBServer, ( void * ) NULL, ethWEBSERVER_PRIORITY );
#endif
 
#if (TFTP_USED == 1)
  /* Create the TFTP server task.  This uses the lwIP RTOS abstraction layer.*/
  sys_thread_new( vBasicTFTPServer, ( void * ) NULL, ethTFTPSERVER_PRIORITY );
#endif
 
#if (SMTP_USED == 1)
  /* Create the SMTP Client task.  This uses the lwIP RTOS abstraction layer.*/
  sys_thread_new( vBasicSMTPClient, ( void * ) NULL, ethSMTPCLIENT_PRIORITY );
#endif
 
}
 
 
/*!
 *  \brief start lwIP layer.
 */
static void prvlwIPInit( void )
{
	/* Initialize lwIP and its interface layer. */
	#if LWIP_STATS
		stats_init();
	#endif
 
	sys_init();
	mem_init();
	memp_init();
	pbuf_init();
	netif_init();
 
	/* once TCP stack has been initalized, set hw and IP parameters, initialize MACB too */
	tcpip_init( prvEthernetConfigureInterface, NULL );
}
 
/*!
 *  \brief set ethernet config 
 */
static void prvEthernetConfigureInterface(void * param)
{
struct ip_addr xIpAddr, xNetMask, xGateway;
extern err_t ethernetif_init( struct netif *netif );
portCHAR MacAddress[6];
 
   /* Default MAC addr. */
   MacAddress[0] = ETHERNET_CONF_ETHADDR0;
   MacAddress[1] = ETHERNET_CONF_ETHADDR1;
   MacAddress[2] = ETHERNET_CONF_ETHADDR2;
   MacAddress[3] = ETHERNET_CONF_ETHADDR3;
   MacAddress[4] = ETHERNET_CONF_ETHADDR4;
   MacAddress[5] = ETHERNET_CONF_ETHADDR5;
 
   /* pass the MAC address to MACB module */
   vMACBSetMACAddress( MacAddress );
 
   /* set MAC hardware address length to be used by lwIP */
   MACB_if.hwaddr_len = 6;
 
   /* set MAC hardware address to be used by lwIP */
   memcpy( MACB_if.hwaddr, MacAddress, MACB_if.hwaddr_len );
 
   /* Default ip addr. */
   IP4_ADDR( &xIpAddr,ETHERNET_CONF_IPADDR0,ETHERNET_CONF_IPADDR1,ETHERNET_CONF_IPADDR2,ETHERNET_CONF_IPADDR3 );
 
   /* Default Subnet mask. */
   IP4_ADDR( &xNetMask,ETHERNET_CONF_NET_MASK0,ETHERNET_CONF_NET_MASK1,ETHERNET_CONF_NET_MASK2,ETHERNET_CONF_NET_MASK3 );
 
   /* Default Gw addr. */
   IP4_ADDR( &xGateway,ETHERNET_CONF_GATEWAY_ADDR0,ETHERNET_CONF_GATEWAY_ADDR1,ETHERNET_CONF_GATEWAY_ADDR2,ETHERNET_CONF_GATEWAY_ADDR3 );
 
   /* add data to netif */
   netif_add( &MACB_if, &xIpAddr, &xNetMask, &xGateway, NULL, ethernetif_init, tcpip_input );
 
   /* make it the default interface */
   netif_set_default( &MACB_if );
 
   /* bring it up */
   netif_set_up( &MACB_if );
}