URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [lwIP_AVR32_UC3/] [conf_eth.h] - Rev 611
Go to most recent revision | Compare with Previous | Blame | View Log
/*This file is prepared for Doxygen automatic documentation generation.*/ /*! \file ****************************************************************** * * \brief Ethernet module configuration file. * * This file contains the possible external configuration of the Ethernet module. * * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 * - Supported devices: All AVR32 devices can be used. * - AppNote: * * \author Atmel Corporation: http://www.atmel.com \n * Support and FAQ: http://support.atmel.no/ * ***************************************************************************/ /* Copyright (c) 2007, Atmel Corporation All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3. The name of ATMEL may not be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _CONF_ETH_H_ #define _CONF_ETH_H_ /*! define stack size for WEB server task */ #define lwipBASIC_WEB_SERVER_STACK_SIZE 256 /*! define stack size for TFTP server task */ #define lwipBASIC_TFTP_SERVER_STACK_SIZE 1024 /*! define stack size for SMTP Client task */ #define lwipBASIC_SMTP_CLIENT_STACK_SIZE 256 /*! define stack size for lwIP task */ #define lwipINTERFACE_STACK_SIZE 512 /*! define stack size for netif task */ #define netifINTERFACE_TASK_STACK_SIZE 256 /*! define WEB server priority */ #define ethWEBSERVER_PRIORITY ( tskIDLE_PRIORITY + 2 ) /*! define TFTP server priority */ #define ethTFTPSERVER_PRIORITY ( tskIDLE_PRIORITY + 3 ) /*! define SMTP Client priority */ #define ethSMTPCLIENT_PRIORITY ( tskIDLE_PRIORITY + 5 ) /*! define lwIP task priority */ #define lwipINTERFACE_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) /*! define netif task priority */ #define netifINTERFACE_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) /*! Number of threads that can be started with sys_thread_new() */ #define SYS_THREAD_MAX 6 /*! LED used by the ethernet task, toggled on each activation */ #define webCONN_LED 7 /*! Phy Address (set through strap options) */ #define ETHERNET_CONF_PHY_ADDR 0x01 #define ETHERNET_CONF_PHY_ID 0x20005C90 /*! Number of receive buffers */ #define ETHERNET_CONF_NB_RX_BUFFERS 20 /*! USE_RMII_INTERFACE must be defined as 1 to use an RMII interface, or 0 to use an MII interface. */ #define ETHERNET_CONF_USE_RMII_INTERFACE 1 /*! Number of Transmit buffers */ #define ETHERNET_CONF_NB_TX_BUFFERS 10 /*! Size of each Transmit buffer. */ #define ETHERNET_CONF_TX_BUFFER_SIZE 512 /*! Clock definition */ #define ETHERNET_CONF_SYSTEM_CLOCK 48000000 /*! Use Auto Negociation to get speed and duplex */ #define ETHERNET_CONF_AN_ENABLE 1 /*! Do not use auto cross capability */ #define ETHERNET_CONF_AUTO_CROSS_ENABLE 0 /*! use direct cable */ #define ETHERNET_CONF_CROSSED_LINK 0 /* ethernet default parameters */ /*! MAC address definition. The MAC address must be unique on the network. */ #define ETHERNET_CONF_ETHADDR0 0x00 #define ETHERNET_CONF_ETHADDR1 0x04 #define ETHERNET_CONF_ETHADDR2 0x25 #define ETHERNET_CONF_ETHADDR3 0x40 #define ETHERNET_CONF_ETHADDR4 0x40 #define ETHERNET_CONF_ETHADDR5 0x40 /*! The IP address being used. */ #define ETHERNET_CONF_IPADDR0 192 #define ETHERNET_CONF_IPADDR1 168 #define ETHERNET_CONF_IPADDR2 0 #define ETHERNET_CONF_IPADDR3 2 /*! The gateway address being used. */ #define ETHERNET_CONF_GATEWAY_ADDR0 192 #define ETHERNET_CONF_GATEWAY_ADDR1 168 #define ETHERNET_CONF_GATEWAY_ADDR2 0 #define ETHERNET_CONF_GATEWAY_ADDR3 1 /*! The network mask being used. */ #define ETHERNET_CONF_NET_MASK0 255 #define ETHERNET_CONF_NET_MASK1 255 #define ETHERNET_CONF_NET_MASK2 255 #define ETHERNET_CONF_NET_MASK3 0 #endif
Go to most recent revision | Compare with Previous | Blame | View Log