URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [msp430_CrossWorks/] [serial/] [serial.c] - Rev 649
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER. * * This file only supports UART 1 */ /* Standard includes. */ #include <stdlib.h> /* Scheduler includes. */ #include "FreeRTOS.h" #include "queue.h" #include "task.h" /* Demo application includes. */ #include "serial.h" /* Constants required to setup the hardware. */ #define serTX_AND_RX ( ( unsigned char ) 0x03 ) /* Misc. constants. */ #define serNO_BLOCK ( ( portTickType ) 0 ) /* Enable the UART Tx interrupt. */ #define vInterruptOn() IFG2 |= UTXIFG1 /* The queue used to hold received characters. */ static xQueueHandle xRxedChars; /* The queue used to hold characters waiting transmission. */ static xQueueHandle xCharsForTx; static volatile short sTHREEmpty; /*-----------------------------------------------------------*/ xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength ) { unsigned long ulBaudRateCount; /* Initialise the hardware. */ /* Generate the baud rate constants for the wanted baud rate. */ ulBaudRateCount = configCPU_CLOCK_HZ / ulWantedBaud; portENTER_CRITICAL(); { /* Create the queues used by the com test task. */ xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) ); xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) ); /* Reset UART. */ UCTL1 |= SWRST; /* Set pin function. */ P4SEL |= serTX_AND_RX; /* All other bits remain at zero for n, 8, 1 interrupt driven operation. LOOPBACK MODE!*/ U1CTL |= CHAR + LISTEN; U1TCTL |= SSEL1; /* Setup baud rate low byte. */ U1BR0 = ( unsigned char ) ( ulBaudRateCount & ( unsigned long ) 0xff ); /* Setup baud rate high byte. */ ulBaudRateCount >>= 8UL; U1BR1 = ( unsigned char ) ( ulBaudRateCount & ( unsigned long ) 0xff ); /* Enable ports. */ ME2 |= UTXE1 + URXE1; /* Set. */ UCTL1 &= ~SWRST; /* Nothing in the buffer yet. */ sTHREEmpty = pdTRUE; /* Enable interrupts. */ IE2 |= URXIE1 + UTXIE1; } portEXIT_CRITICAL(); /* Unlike other ports, this serial code does not allow for more than one com port. We therefore don't return a pointer to a port structure and can instead just return NULL. */ return NULL; } /*-----------------------------------------------------------*/ signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, portTickType xBlockTime ) { /* Get the next character from the buffer. Return false if no characters are available, or arrive before xBlockTime expires. */ if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) ) { return pdTRUE; } else { return pdFALSE; } } /*-----------------------------------------------------------*/ signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, portTickType xBlockTime ) { signed portBASE_TYPE xReturn; /* Transmit a character. */ portENTER_CRITICAL(); { if( sTHREEmpty == pdTRUE ) { /* If sTHREEmpty is true then the UART Tx ISR has indicated that there are no characters queued to be transmitted - so we can write the character directly to the shift Tx register. */ sTHREEmpty = pdFALSE; U1TXBUF = cOutChar; xReturn = pdPASS; } else { /* sTHREEmpty is false, so there are still characters waiting to be transmitted. We have to queue this character so it gets transmitted in turn. */ /* Return false if after the block time there is no room on the Tx queue. It is ok to block inside a critical section as each task maintains it's own critical section status. */ xReturn = xQueueSend( xCharsForTx, &cOutChar, xBlockTime ); /* Depending on queue sizing and task prioritisation: While we were blocked waiting to post on the queue interrupts were not disabled. It is possible that the serial ISR has emptied the Tx queue, in which case we need to start the Tx off again writing directly to the Tx register. */ if( ( sTHREEmpty == pdTRUE ) && ( xReturn == pdPASS ) ) { /* Get back the character we just posted. */ xQueueReceive( xCharsForTx, &cOutChar, serNO_BLOCK ); sTHREEmpty = pdFALSE; U1TXBUF = cOutChar; } } } portEXIT_CRITICAL(); return pdPASS; } /*-----------------------------------------------------------*/ #if configINTERRUPT_EXAMPLE_METHOD == 1 /* * UART RX interrupt service routine. */ void vRxISR( void ) __interrupt[ UART1RX_VECTOR ] { signed char cChar; portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE; /* Get the character from the UART and post it on the queue of Rxed characters. */ cChar = U1RXBUF; xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken ); if( xHigherPriorityTaskWoken ) { /*If the post causes a task to wake force a context switch as the woken task may have a higher priority than the task we have interrupted. */ taskYIELD(); } /* Make sure any low power mode bits are clear before leaving the ISR. */ __bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF ); } /*-----------------------------------------------------------*/ /* * UART Tx interrupt service routine. */ void vTxISR( void ) __interrupt[ UART1TX_VECTOR ] { signed char cChar; portBASE_TYPE xTaskWoken = pdFALSE; /* The previous character has been transmitted. See if there are any further characters waiting transmission. */ if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWoken ) == pdTRUE ) { /* There was another character queued - transmit it now. */ U1TXBUF = cChar; } else { /* There were no other characters to transmit. */ sTHREEmpty = pdTRUE; } /* Make sure any low power mode bits are clear before leaving the ISR. */ __bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF ); } /*-----------------------------------------------------------*/ #elif configINTERRUPT_EXAMPLE_METHOD == 2 /* This is a standard C function as an assembly file wrapper is used as an interrupt entry point. */ void vRxISR( void ) { signed char cChar; portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE; /* Get the character from the UART and post it on the queue of Rxed characters. */ cChar = U1RXBUF; xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken ); /*If the post causes a task to wake force a context switch as the woken task may have a higher priority than the task we have interrupted. */ portYIELD_FROM_ISR( xHigherPriorityTaskWoken ); } /*-----------------------------------------------------------*/ /* This is a standard C function as an assembly file wrapper is used as an interrupt entry point. */ void vTxISR( void ) { signed char cChar; portBASE_TYPE xTaskWoken = pdFALSE; /* The previous character has been transmitted. See if there are any further characters waiting transmission. */ if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWoken ) == pdTRUE ) { /* There was another character queued - transmit it now. */ U1TXBUF = cChar; } else { /* There were no other characters to transmit. */ sTHREEmpty = pdTRUE; } } #endif /* configINTERRUPT_EXAMPLE_METHOD */ /*-----------------------------------------------------------*/
Go to most recent revision | Compare with Previous | Blame | View Log