URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [uIP_Demo_IAR_ARM7/] [SrcIAR/] [Cstartup_SAM7.c] - Rev 589
Go to most recent revision | Compare with Previous | Blame | View Log
//----------------------------------------------------------------------------- // ATMEL Microcontroller Software Support - ROUSSET - //----------------------------------------------------------------------------- // DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF // MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE // DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, // INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, // OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF // LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING // NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, // EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. //----------------------------------------------------------------------------- // File Name : Cstartup_SAM7.c // Object : Low level initialisations written in C for Tools // For AT91SAM7X256 with 2 flash plane // Creation : JPP 14-Sep-2006 //----------------------------------------------------------------------------- #include "Board.h" // The following functions must be write in ARM mode this function called // directly by exception vector extern void AT91F_Spurious_handler(void); extern void AT91F_Default_IRQ_handler(void); extern void AT91F_Default_FIQ_handler(void); //*---------------------------------------------------------------------------- //* \fn AT91F_LowLevelInit //* \brief This function performs very low level HW initialization //* this function can use a Stack, depending the compilation //* optimization mode //*---------------------------------------------------------------------------- void AT91F_LowLevelInit(void) @ "ICODE" { unsigned char i; /////////////////////////////////////////////////////////////////////////// // EFC Init /////////////////////////////////////////////////////////////////////////// AT91C_BASE_MC->MC_FMR = AT91C_MC_FWS_1FWS ; /////////////////////////////////////////////////////////////////////////// // Init PMC Step 1. Enable Main Oscillator // Main Oscillator startup time is board specific: // Main Oscillator Startup Time worst case (3MHz) corresponds to 15ms // (0x40 for AT91C_CKGR_OSCOUNT field) /////////////////////////////////////////////////////////////////////////// AT91C_BASE_PMC->PMC_MOR = (( AT91C_CKGR_OSCOUNT & (0x40 <<8) | AT91C_CKGR_MOSCEN )); // Wait Main Oscillator stabilization while(!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS)); /////////////////////////////////////////////////////////////////////////// // Init PMC Step 2. // Set PLL to 96MHz (96,109MHz) and UDP Clock to 48MHz // PLL Startup time depends on PLL RC filter: worst case is choosen // UDP Clock (48,058MHz) is compliant with the Universal Serial Bus // Specification (+/- 0.25% for full speed) /////////////////////////////////////////////////////////////////////////// AT91C_BASE_PMC->PMC_PLLR = AT91C_CKGR_USBDIV_1 | (16 << 8) | (AT91C_CKGR_MUL & (72 << 16)) | (AT91C_CKGR_DIV & 14); // Wait for PLL stabilization while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK) ); // Wait until the master clock is established for the case we already // turn on the PLL while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) ); /////////////////////////////////////////////////////////////////////////// // Init PMC Step 3. // Selection of Master Clock MCK equal to (Processor Clock PCK) PLL/2=48MHz // The PMC_MCKR register must not be programmed in a single write operation // (see. Product Errata Sheet) /////////////////////////////////////////////////////////////////////////// AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2; // Wait until the master clock is established while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) ); AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK; // Wait until the master clock is established while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) ); /////////////////////////////////////////////////////////////////////////// // Disable Watchdog (write once register) /////////////////////////////////////////////////////////////////////////// AT91C_BASE_WDTC->WDTC_WDMR = AT91C_WDTC_WDDIS; /////////////////////////////////////////////////////////////////////////// // Init AIC: assign corresponding handler for each interrupt source /////////////////////////////////////////////////////////////////////////// AT91C_BASE_AIC->AIC_SVR[0] = (int) AT91F_Default_FIQ_handler ; for (i = 1; i < 31; i++) { AT91C_BASE_AIC->AIC_SVR[i] = (int) AT91F_Default_IRQ_handler ; } AT91C_BASE_AIC->AIC_SPU = (unsigned int) AT91F_Spurious_handler; }
Go to most recent revision | Compare with Previous | Blame | View Log