Subversion Repositories openrisc

//  ----------------------------------------------------------------------------
//          ATMEL Microcontroller Software Support  -  ROUSSET  -
//  ----------------------------------------------------------------------------
//  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
//  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
//  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
//  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
//  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
//  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
//  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
//  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
//  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//  ----------------------------------------------------------------------------
//  File Name           : SAM7_FLASH.mac
//  Object              : Generic Macro File for IAR
//  1.0 17/Aug/05 FBr   : Creation
//  ----------------------------------------------------------------------------

/*********************************************************************
*
*       _InitRSTC()
*
* Function description
*   Initializes the RSTC (Reset controller).
*   This makes sense since the default is to not allow user resets, which makes it impossible to
*   apply a second RESET via J-Link
*/
_InitRSTC() {
    __writeMemory32(0xA5000001, 0xFFFFFD08,"Memory");    // Allow user reset
}

/*********************************************************************
*
*       _InitPLL()
* Function description
*   Initializes the PMC.
*   1. Enable the Main Oscillator
*   2. Configure PLL to 96MHz
*   3. Switch Master Clock (MCK) on PLL/2 = 48MHz
*/
_InitPLL() {

    __message "Enable Main Oscillator";
    __writeMemory32(0x00000601,0xFFFFFc20,"Memory");    // MOSC
    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x1)  );

    __message "Set PLL to 96MHz";
    __writeMemory32(0x10191c05,0xFFFFFc2c,"Memory");    // LOCK
    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x4)  );

    __message "Set Master Clock to 48MHz";
    __writeMemory32(0x00000004,0xFFFFFc30,"Memory");    // MCKRDY
    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x8)  );
    __writeMemory32(0x00000007,0xFFFFFc30,"Memory");    // MCKRDY
    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x8)  );

    // Set 1 WS for Flash accesses on each EFC 
    __writeMemory32(0x00480100,0xFFFFFF60,"Memory");
    __writeMemory32(0x00480100,0xFFFFFF70,"Memory");
}

/*********************************************************************
*
*       execUserReset() : JTAG set initially to Full Speed
*/
execUserReset() {
    __message "execUserReset()";
    __hwReset(0);                       // Hardware Reset: CPU is automatically halted after the reset (JTAG is already configured to 32kHz)
    _InitPLL();                         // Allow to debug at JTAG Full Speed
    _InitRSTC();                        // Enable User Reset to allow execUserReset() execution
}