URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Source/] [portable/] [GCC/] [RX600/] [port.c] - Rev 579
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /*----------------------------------------------------------- * Implementation of functions defined in portable.h for the SH2A port. *----------------------------------------------------------*/ /* Scheduler includes. */ #include "FreeRTOS.h" #include "task.h" /* Library includes. */ #include "string.h" /* Hardware specifics. */ #include "iodefine.h" /*-----------------------------------------------------------*/ /* Tasks should start with interrupts enabled and in Supervisor mode, therefore PSW is set with U and I set, and PM and IPL clear. */ #define portINITIAL_PSW ( ( portSTACK_TYPE ) 0x00030000 ) #define portINITIAL_FPSW ( ( portSTACK_TYPE ) 0x00000100 ) /* These macros allow a critical section to be added around the call to vTaskIncrementTick(), which is only ever called from interrupts at the kernel priority - ie a known priority. Therefore these local macros are a slight optimisation compared to calling the global SET/CLEAR_INTERRUPT_MASK macros, which would require the old IPL to be read first and stored in a local variable. */ #define portDISABLE_INTERRUPTS_FROM_KERNEL_ISR() __asm volatile ( "MVTIPL %0" ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) ) #define portENABLE_INTERRUPTS_FROM_KERNEL_ISR() __asm volatile ( "MVTIPL %0" ::"i"(configKERNEL_INTERRUPT_PRIORITY) ) /*-----------------------------------------------------------*/ /* * Function to start the first task executing - written in asm code as direct * access to registers is required. */ static void prvStartFirstTask( void ) __attribute__((naked)); /* * Software interrupt handler. Performs the actual context switch (saving and * restoring of registers). Written in asm code as direct register access is * required. */ void vSoftwareInterruptISR( void ) __attribute__((naked)); /* * The tick interrupt handler. */ void vTickISR( void ) __attribute__((interrupt)); /*-----------------------------------------------------------*/ extern void *pxCurrentTCB; /*-----------------------------------------------------------*/ /* * See header file for description. */ portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters ) { /* R0 is not included as it is the stack pointer. */ *pxTopOfStack = 0xdeadbeef; pxTopOfStack--; *pxTopOfStack = portINITIAL_PSW; pxTopOfStack--; *pxTopOfStack = ( portSTACK_TYPE ) pxCode; /* When debugging it can be useful if every register is set to a known value. Otherwise code space can be saved by just setting the registers that need to be set. */ #ifdef USE_FULL_REGISTER_INITIALISATION { pxTopOfStack--; *pxTopOfStack = 0xffffffff; /* r15. */ pxTopOfStack--; *pxTopOfStack = 0xeeeeeeee; pxTopOfStack--; *pxTopOfStack = 0xdddddddd; pxTopOfStack--; *pxTopOfStack = 0xcccccccc; pxTopOfStack--; *pxTopOfStack = 0xbbbbbbbb; pxTopOfStack--; *pxTopOfStack = 0xaaaaaaaa; pxTopOfStack--; *pxTopOfStack = 0x99999999; pxTopOfStack--; *pxTopOfStack = 0x88888888; pxTopOfStack--; *pxTopOfStack = 0x77777777; pxTopOfStack--; *pxTopOfStack = 0x66666666; pxTopOfStack--; *pxTopOfStack = 0x55555555; pxTopOfStack--; *pxTopOfStack = 0x44444444; pxTopOfStack--; *pxTopOfStack = 0x33333333; pxTopOfStack--; *pxTopOfStack = 0x22222222; pxTopOfStack--; } #else { pxTopOfStack -= 15; } #endif *pxTopOfStack = ( portSTACK_TYPE ) pvParameters; /* R1 */ pxTopOfStack--; *pxTopOfStack = portINITIAL_FPSW; pxTopOfStack--; *pxTopOfStack = 0x12345678; /* Accumulator. */ pxTopOfStack--; *pxTopOfStack = 0x87654321; /* Accumulator. */ return pxTopOfStack; } /*-----------------------------------------------------------*/ portBASE_TYPE xPortStartScheduler( void ) { extern void vApplicationSetupTimerInterrupt( void ); /* Use pxCurrentTCB just so it does not get optimised away. */ if( pxCurrentTCB != NULL ) { /* Call an application function to set up the timer that will generate the tick interrupt. This way the application can decide which peripheral to use. A demo application is provided to show a suitable example. */ vApplicationSetupTimerInterrupt(); /* Enable the software interrupt. */ _IEN( _ICU_SWINT ) = 1; /* Ensure the software interrupt is clear. */ _IR( _ICU_SWINT ) = 0; /* Ensure the software interrupt is set to the kernel priority. */ _IPR( _ICU_SWINT ) = configKERNEL_INTERRUPT_PRIORITY; /* Start the first task. */ prvStartFirstTask(); } /* Should not get here. */ return pdFAIL; } /*-----------------------------------------------------------*/ void vPortEndScheduler( void ) { /* Not implemented as there is nothing to return to. */ } /*-----------------------------------------------------------*/ static void prvStartFirstTask( void ) { __asm volatile ( /* When starting the scheduler there is nothing that needs moving to the interrupt stack because the function is not called from an interrupt. Just ensure the current stack is the user stack. */ "SETPSW U \n" \ /* Obtain the location of the stack associated with which ever task pxCurrentTCB is currently pointing to. */ "MOV.L #_pxCurrentTCB, R15 \n" \ "MOV.L [R15], R15 \n" \ "MOV.L [R15], R0 \n" \ /* Restore the registers from the stack of the task pointed to by pxCurrentTCB. */ "POP R15 \n" \ /* Accumulator low 32 bits. */ "MVTACLO R15 \n" \ "POP R15 \n" \ /* Accumulator high 32 bits. */ "MVTACHI R15 \n" \ "POP R15 \n" \ /* Floating point status word. */ "MVTC R15, FPSW \n" \ /* R1 to R15 - R0 is not included as it is the SP. */ "POPM R1-R15 \n" \ /* This pops the remaining registers. */ "RTE \n" \ "NOP \n" \ "NOP \n" ); } /*-----------------------------------------------------------*/ void vSoftwareInterruptISR( void ) { __asm volatile ( /* Re-enable interrupts. */ "SETPSW I \n" \ /* Move the data that was automatically pushed onto the interrupt stack when the interrupt occurred from the interrupt stack to the user stack. R15 is saved before it is clobbered. */ "PUSH.L R15 \n" \ /* Read the user stack pointer. */ "MVFC USP, R15 \n" \ /* Move the address down to the data being moved. */ "SUB #12, R15 \n" \ "MVTC R15, USP \n" \ /* Copy the data across, R15, then PC, then PSW. */ "MOV.L [ R0 ], [ R15 ] \n" \ "MOV.L 4[ R0 ], 4[ R15 ] \n" \ "MOV.L 8[ R0 ], 8[ R15 ] \n" \ /* Move the interrupt stack pointer to its new correct position. */ "ADD #12, R0 \n" \ /* All the rest of the registers are saved directly to the user stack. */ "SETPSW U \n" \ /* Save the rest of the general registers (R15 has been saved already). */ "PUSHM R1-R14 \n" \ /* Save the FPSW and accumulator. */ "MVFC FPSW, R15 \n" \ "PUSH.L R15 \n" \ "MVFACHI R15 \n" \ "PUSH.L R15 \n" \ /* Middle word. */ "MVFACMI R15 \n" \ /* Shifted left as it is restored to the low order word. */ "SHLL #16, R15 \n" \ "PUSH.L R15 \n" \ /* Save the stack pointer to the TCB. */ "MOV.L #_pxCurrentTCB, R15 \n" \ "MOV.L [ R15 ], R15 \n" \ "MOV.L R0, [ R15 ] \n" \ /* Ensure the interrupt mask is set to the syscall priority while the kernel structures are being accessed. */ "MVTIPL %0 \n" \ /* Select the next task to run. */ "BSR.A _vTaskSwitchContext \n" \ /* Reset the interrupt mask as no more data structure access is required. */ "MVTIPL %1 \n" \ /* Load the stack pointer of the task that is now selected as the Running state task from its TCB. */ "MOV.L #_pxCurrentTCB,R15 \n" \ "MOV.L [ R15 ], R15 \n" \ "MOV.L [ R15 ], R0 \n" \ /* Restore the context of the new task. The PSW (Program Status Word) and PC will be popped by the RTE instruction. */ "POP R15 \n" \ "MVTACLO R15 \n" \ "POP R15 \n" \ "MVTACHI R15 \n" \ "POP R15 \n" \ "MVTC R15, FPSW \n" \ "POPM R1-R15 \n" \ "RTE \n" \ "NOP \n" \ "NOP " :: "i"(configMAX_SYSCALL_INTERRUPT_PRIORITY), "i"(configKERNEL_INTERRUPT_PRIORITY) ); } /*-----------------------------------------------------------*/ void vTickISR( void ) { /* Re-enabled interrupts. */ __asm volatile( "SETPSW I" ); /* Increment the tick, and perform any processing the new tick value necessitates. Ensure IPL is at the max syscall value first. */ portDISABLE_INTERRUPTS_FROM_KERNEL_ISR(); { vTaskIncrementTick(); } portENABLE_INTERRUPTS_FROM_KERNEL_ISR(); /* Only select a new task if the preemptive scheduler is being used. */ #if( configUSE_PREEMPTION == 1 ) taskYIELD(); #endif } /*-----------------------------------------------------------*/ unsigned long ulPortGetIPL( void ) { __asm volatile ( "MVFC PSW, R1 \n" \ "SHLR #24, R1 \n" \ "RTS " ); /* This will never get executed, but keeps the compiler from complaining. */ return 0; } /*-----------------------------------------------------------*/ void vPortSetIPL( unsigned long ulNewIPL ) { __asm volatile ( "PUSH R5 \n" \ "MVFC PSW, R5 \n" \ "SHLL #24, R1 \n" \ "AND #-0F000001H, R5 \n" \ "OR R1, R5 \n" \ "MVTC R5, PSW \n" \ "POP R5 \n" \ "RTS " ); }
Go to most recent revision | Compare with Previous | Blame | View Log