URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Source/] [portable/] [MPLAB/] [PIC18F/] [port.c] - Rev 575
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ /* Changes between V1.2.4 and V1.2.5 + Introduced portGLOBAL_INTERRUPT_FLAG definition to test the global interrupt flag setting. Using the two bits defined within portINITAL_INTERRUPT_STATE was causing the w register to get clobbered before the test was performed. Changes from V1.2.5 + Set the interrupt vector address to 0x08. Previously it was at the incorrect address for compatibility mode of 0x18. Changes from V2.1.1 + PCLATU and PCLATH are now saved as part of the context. This allows function pointers to be used within tasks. Thanks to Javier Espeche for the enhancement. Changes from V2.3.1 + TABLAT is now saved as part of the task context. Changes from V3.2.0 + TBLPTRU is now initialised to zero as the MPLAB compiler expects this value and does not write to the register. */ /* Scheduler include files. */ #include "FreeRTOS.h" #include "task.h" /* MPLAB library include file. */ #include "timers.h" /*----------------------------------------------------------- * Implementation of functions defined in portable.h for the PIC port. *----------------------------------------------------------*/ /* Hardware setup for tick. */ #define portTIMER_FOSC_SCALE ( ( unsigned long ) 4 ) /* Initial interrupt enable state for newly created tasks. This value is copied into INTCON when a task switches in for the first time. */ #define portINITAL_INTERRUPT_STATE 0xc0 /* Just the bit within INTCON for the global interrupt flag. */ #define portGLOBAL_INTERRUPT_FLAG 0x80 /* Constant used for context switch macro when we require the interrupt enable state to be unchanged when the interrupted task is switched back in. */ #define portINTERRUPTS_UNCHANGED 0x00 /* Some memory areas get saved as part of the task context. These memory area's get used by the compiler for temporary storage, especially when performing mathematical operations, or when using 32bit data types. This constant defines the size of memory area which must be saved. */ #define portCOMPILER_MANAGED_MEMORY_SIZE ( ( unsigned char ) 0x13 ) /* We require the address of the pxCurrentTCB variable, but don't want to know any details of its type. */ typedef void tskTCB; extern volatile tskTCB * volatile pxCurrentTCB; /* IO port constants. */ #define portBIT_SET ( ( unsigned char ) 1 ) #define portBIT_CLEAR ( ( unsigned char ) 0 ) /* * The serial port ISR's are defined in serial.c, but are called from portable * as they use the same vector as the tick ISR. */ void vSerialTxISR( void ); void vSerialRxISR( void ); /* * Perform hardware setup to enable ticks. */ static void prvSetupTimerInterrupt( void ); /* * ISR to maintain the tick, and perform tick context switches if the * preemptive scheduler is being used. */ static void prvTickISR( void ); /* * ISR placed on the low priority vector. This calls the appropriate ISR for * the actual interrupt. */ static void prvLowInterrupt( void ); /* * Macro that pushes all the registers that make up the context of a task onto * the stack, then saves the new top of stack into the TCB. * * If this is called from an ISR then the interrupt enable bits must have been * set for the ISR to ever get called. Therefore we want to save the INTCON * register with the enable bits forced to be set - and ucForcedInterruptFlags * must contain these bit settings. This means the interrupts will again be * enabled when the interrupted task is switched back in. * * If this is called from a manual context switch (i.e. from a call to yield), * then we want to save the INTCON so it is restored with its current state, * and ucForcedInterruptFlags must be 0. This allows a yield from within * a critical section. * * The compiler uses some locations at the bottom of the memory for temporary * storage during math and other computations. This is especially true if * 32bit data types are utilised (as they are by the scheduler). The .tmpdata * and MATH_DATA sections have to be stored in there entirety as part of a task * context. This macro stores from data address 0x00 to * portCOMPILER_MANAGED_MEMORY_SIZE. This is sufficient for the demo * applications but you should check the map file for your project to ensure * this is sufficient for your needs. It is not clear whether this size is * fixed for all compilations or has the potential to be program specific. */ #define portSAVE_CONTEXT( ucForcedInterruptFlags ) \ { \ _asm \ /* Save the status and WREG registers first, as these will get modified \ by the operations below. */ \ MOVFF WREG, PREINC1 \ MOVFF STATUS, PREINC1 \ /* Save the INTCON register with the appropriate bits forced if \ necessary - as described above. */ \ MOVFF INTCON, WREG \ IORLW ucForcedInterruptFlags \ MOVFF WREG, PREINC1 \ _endasm \ \ portDISABLE_INTERRUPTS(); \ \ _asm \ /* Store the necessary registers to the stack. */ \ MOVFF BSR, PREINC1 \ MOVFF FSR2L, PREINC1 \ MOVFF FSR2H, PREINC1 \ MOVFF FSR0L, PREINC1 \ MOVFF FSR0H, PREINC1 \ MOVFF TABLAT, PREINC1 \ MOVFF TBLPTRU, PREINC1 \ MOVFF TBLPTRH, PREINC1 \ MOVFF TBLPTRL, PREINC1 \ MOVFF PRODH, PREINC1 \ MOVFF PRODL, PREINC1 \ MOVFF PCLATU, PREINC1 \ MOVFF PCLATH, PREINC1 \ /* Store the .tempdata and MATH_DATA areas as described above. */ \ CLRF FSR0L, 0 \ CLRF FSR0H, 0 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF POSTINC0, PREINC1 \ MOVFF INDF0, PREINC1 \ MOVFF FSR0L, PREINC1 \ MOVFF FSR0H, PREINC1 \ /* Store the hardware stack pointer in a temp register before we \ modify it. */ \ MOVFF STKPTR, FSR0L \ _endasm \ \ /* Store each address from the hardware stack. */ \ while( STKPTR > ( unsigned char ) 0 ) \ { \ _asm \ MOVFF TOSL, PREINC1 \ MOVFF TOSH, PREINC1 \ MOVFF TOSU, PREINC1 \ POP \ _endasm \ } \ \ _asm \ /* Store the number of addresses on the hardware stack (from the \ temporary register). */ \ MOVFF FSR0L, PREINC1 \ MOVF PREINC1, 1, 0 \ _endasm \ \ /* Save the new top of the software stack in the TCB. */ \ _asm \ MOVFF pxCurrentTCB, FSR0L \ MOVFF pxCurrentTCB + 1, FSR0H \ MOVFF FSR1L, POSTINC0 \ MOVFF FSR1H, POSTINC0 \ _endasm \ } /*-----------------------------------------------------------*/ /* * This is the reverse of portSAVE_CONTEXT. See portSAVE_CONTEXT for more * details. */ #define portRESTORE_CONTEXT() \ { \ _asm \ /* Set FSR0 to point to pxCurrentTCB->pxTopOfStack. */ \ MOVFF pxCurrentTCB, FSR0L \ MOVFF pxCurrentTCB + 1, FSR0H \ \ /* De-reference FSR0 to set the address it holds into FSR1. \ (i.e. *( pxCurrentTCB->pxTopOfStack ) ). */ \ MOVFF POSTINC0, FSR1L \ MOVFF POSTINC0, FSR1H \ \ /* How many return addresses are there on the hardware stack? Discard \ the first byte as we are pointing to the next free space. */ \ MOVFF POSTDEC1, FSR0L \ MOVFF POSTDEC1, FSR0L \ _endasm \ \ /* Fill the hardware stack from our software stack. */ \ STKPTR = 0; \ \ while( STKPTR < FSR0L ) \ { \ _asm \ PUSH \ MOVF POSTDEC1, 0, 0 \ MOVWF TOSU, 0 \ MOVF POSTDEC1, 0, 0 \ MOVWF TOSH, 0 \ MOVF POSTDEC1, 0, 0 \ MOVWF TOSL, 0 \ _endasm \ } \ \ _asm \ /* Restore the .tmpdata and MATH_DATA memory. */ \ MOVFF POSTDEC1, FSR0H \ MOVFF POSTDEC1, FSR0L \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, POSTDEC0 \ MOVFF POSTDEC1, INDF0 \ /* Restore the other registers forming the tasks context. */ \ MOVFF POSTDEC1, PCLATH \ MOVFF POSTDEC1, PCLATU \ MOVFF POSTDEC1, PRODL \ MOVFF POSTDEC1, PRODH \ MOVFF POSTDEC1, TBLPTRL \ MOVFF POSTDEC1, TBLPTRH \ MOVFF POSTDEC1, TBLPTRU \ MOVFF POSTDEC1, TABLAT \ MOVFF POSTDEC1, FSR0H \ MOVFF POSTDEC1, FSR0L \ MOVFF POSTDEC1, FSR2H \ MOVFF POSTDEC1, FSR2L \ MOVFF POSTDEC1, BSR \ /* The next byte is the INTCON register. Read this into WREG as some \ manipulation is required. */ \ MOVFF POSTDEC1, WREG \ _endasm \ \ /* From the INTCON register, only the interrupt enable bits form part \ of the tasks context. It is perfectly legitimate for another task to \ have modified any other bits. We therefore only restore the top two bits. \ */ \ if( WREG & portGLOBAL_INTERRUPT_FLAG ) \ { \ _asm \ MOVFF POSTDEC1, STATUS \ MOVFF POSTDEC1, WREG \ /* Return enabling interrupts. */ \ RETFIE 0 \ _endasm \ } \ else \ { \ _asm \ MOVFF POSTDEC1, STATUS \ MOVFF POSTDEC1, WREG \ /* Return without effecting interrupts. The context may have \ been saved from a critical region. */ \ RETURN 0 \ _endasm \ } \ } /*-----------------------------------------------------------*/ /* * See header file for description. */ portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters ) { unsigned long ulAddress; unsigned char ucBlock; /* Place a few bytes of known values on the bottom of the stack. This is just useful for debugging. */ *pxTopOfStack = 0x11; pxTopOfStack++; *pxTopOfStack = 0x22; pxTopOfStack++; *pxTopOfStack = 0x33; pxTopOfStack++; /* Simulate how the stack would look after a call to vPortYield() generated by the compiler. First store the function parameters. This is where the task will expect to find them when it starts running. */ ulAddress = ( unsigned long ) pvParameters; *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned long ) 0x00ff ); pxTopOfStack++; ulAddress >>= 8; *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned long ) 0x00ff ); pxTopOfStack++; /* Next we just leave a space. When a context is saved the stack pointer is incremented before it is used so as not to corrupt whatever the stack pointer is actually pointing to. This is especially necessary during function epilogue code generated by the compiler. */ *pxTopOfStack = 0x44; pxTopOfStack++; /* Next are all the registers that form part of the task context. */ *pxTopOfStack = ( portSTACK_TYPE ) 0x66; /* WREG. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0xcc; /* Status. */ pxTopOfStack++; /* INTCON is saved with interrupts enabled. */ *pxTopOfStack = ( portSTACK_TYPE ) portINITAL_INTERRUPT_STATE; /* INTCON */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x11; /* BSR. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x22; /* FSR2L. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x33; /* FSR2H. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x44; /* FSR0L. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x55; /* FSR0H. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x66; /* TABLAT. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x00; /* TBLPTRU. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x88; /* TBLPTRUH. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x99; /* TBLPTRUL. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0xaa; /* PRODH. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0xbb; /* PRODL. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x00; /* PCLATU. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x00; /* PCLATH. */ pxTopOfStack++; /* Next the .tmpdata and MATH_DATA sections. */ for( ucBlock = 0; ucBlock <= portCOMPILER_MANAGED_MEMORY_SIZE; ucBlock++ ) { *pxTopOfStack = ( portSTACK_TYPE ) ucBlock; *pxTopOfStack++; } /* Store the top of the global data section. */ *pxTopOfStack = ( portSTACK_TYPE ) portCOMPILER_MANAGED_MEMORY_SIZE; /* Low. */ pxTopOfStack++; *pxTopOfStack = ( portSTACK_TYPE ) 0x00; /* High. */ pxTopOfStack++; /* The only function return address so far is the address of the task. */ ulAddress = ( unsigned long ) pxCode; /* TOS low. */ *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned long ) 0x00ff ); pxTopOfStack++; ulAddress >>= 8; /* TOS high. */ *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned long ) 0x00ff ); pxTopOfStack++; ulAddress >>= 8; /* TOS even higher. */ *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned long ) 0x00ff ); pxTopOfStack++; /* Store the number of return addresses on the hardware stack - so far only the address of the task entry point. */ *pxTopOfStack = ( portSTACK_TYPE ) 1; pxTopOfStack++; return pxTopOfStack; } /*-----------------------------------------------------------*/ portBASE_TYPE xPortStartScheduler( void ) { /* Setup a timer for the tick ISR is using the preemptive scheduler. */ prvSetupTimerInterrupt(); /* Restore the context of the first task to run. */ portRESTORE_CONTEXT(); /* Should not get here. Use the function name to stop compiler warnings. */ ( void ) prvLowInterrupt; ( void ) prvTickISR; return pdTRUE; } /*-----------------------------------------------------------*/ void vPortEndScheduler( void ) { /* It is unlikely that the scheduler for the PIC port will get stopped once running. If required disable the tick interrupt here, then return to xPortStartScheduler(). */ } /*-----------------------------------------------------------*/ /* * Manual context switch. This is similar to the tick context switch, * but does not increment the tick count. It must be identical to the * tick context switch in how it stores the stack of a task. */ void vPortYield( void ) { /* This can get called with interrupts either enabled or disabled. We will save the INTCON register with the interrupt enable bits unmodified. */ portSAVE_CONTEXT( portINTERRUPTS_UNCHANGED ); /* Switch to the highest priority task that is ready to run. */ vTaskSwitchContext(); /* Start executing the task we have just switched to. */ portRESTORE_CONTEXT(); } /*-----------------------------------------------------------*/ /* * Vector for ISR. Nothing here must alter any registers! */ #pragma code high_vector=0x08 static void prvLowInterrupt( void ) { /* Was the interrupt the tick? */ if( PIR1bits.CCP1IF ) { _asm goto prvTickISR _endasm } /* Was the interrupt a byte being received? */ if( PIR1bits.RCIF ) { _asm goto vSerialRxISR _endasm } /* Was the interrupt the Tx register becoming empty? */ if( PIR1bits.TXIF ) { if( PIE1bits.TXIE ) { _asm goto vSerialTxISR _endasm } } } #pragma code /*-----------------------------------------------------------*/ /* * ISR for the tick. * This increments the tick count and, if using the preemptive scheduler, * performs a context switch. This must be identical to the manual * context switch in how it stores the context of a task. */ static void prvTickISR( void ) { /* Interrupts must have been enabled for the ISR to fire, so we have to save the context with interrupts enabled. */ portSAVE_CONTEXT( portGLOBAL_INTERRUPT_FLAG ); PIR1bits.CCP1IF = 0; /* Maintain the tick count. */ vTaskIncrementTick(); #if configUSE_PREEMPTION == 1 { /* Switch to the highest priority task that is ready to run. */ vTaskSwitchContext(); } #endif portRESTORE_CONTEXT(); } /*-----------------------------------------------------------*/ /* * Setup a timer for a regular tick. */ static void prvSetupTimerInterrupt( void ) { const unsigned long ulConstCompareValue = ( ( configCPU_CLOCK_HZ / portTIMER_FOSC_SCALE ) / configTICK_RATE_HZ ); unsigned long ulCompareValue; unsigned char ucByte; /* Interrupts are disabled when this function is called. Setup CCP1 to provide the tick interrupt using a compare match on timer 1. Clear the time count then setup timer. */ TMR1H = ( unsigned char ) 0x00; TMR1L = ( unsigned char ) 0x00; /* Set the compare match value. */ ulCompareValue = ulConstCompareValue; CCPR1L = ( unsigned char ) ( ulCompareValue & ( unsigned long ) 0xff ); ulCompareValue >>= ( unsigned long ) 8; CCPR1H = ( unsigned char ) ( ulCompareValue & ( unsigned long ) 0xff ); CCP1CONbits.CCP1M0 = portBIT_SET; /*< Compare match mode. */ CCP1CONbits.CCP1M1 = portBIT_SET; /*< Compare match mode. */ CCP1CONbits.CCP1M2 = portBIT_CLEAR; /*< Compare match mode. */ CCP1CONbits.CCP1M3 = portBIT_SET; /*< Compare match mode. */ PIE1bits.CCP1IE = portBIT_SET; /*< Interrupt enable. */ /* We are only going to use the global interrupt bit, so set the peripheral bit to true. */ INTCONbits.GIEL = portBIT_SET; /* Provided library function for setting up the timer that will produce the tick. */ OpenTimer1( T1_16BIT_RW & T1_SOURCE_INT & T1_PS_1_1 & T1_CCP1_T3_CCP2 ); }
Go to most recent revision | Compare with Previous | Blame | View Log