OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Source/] [portable/] [MPLAB/] [PIC32MX/] [ISR_Support.h] - Rev 820

Go to most recent revision | Compare with Previous | Blame | View Log

/*
    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.
 
    ***************************************************************************
    *                                                                         *
    * If you are:                                                             *
    *                                                                         *
    *    + New to FreeRTOS,                                                   *
    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *
    *    + Looking for basic training,                                        *
    *    + Wanting to improve your FreeRTOS skills and productivity           *
    *                                                                         *
    * then take a look at the FreeRTOS books - available as PDF or paperback  *
    *                                                                         *
    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *
    *                  http://www.FreeRTOS.org/Documentation                  *
    *                                                                         *
    * A pdf reference manual is also available.  Both are usually delivered   *
    * to your inbox within 20 minutes to two hours when purchased between 8am *
    * and 8pm GMT (although please allow up to 24 hours in case of            *
    * exceptional circumstances).  Thank you for your support!                *
    *                                                                         *
    ***************************************************************************
 
    This file is part of the FreeRTOS distribution.
 
    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
    ***NOTE*** The exception to the GPL is included to allow you to distribute
    a combined work that includes FreeRTOS without being obliged to provide the
    source code for proprietary components outside of the FreeRTOS kernel.
    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
    more details. You should have received a copy of the GNU General Public 
    License and the FreeRTOS license exception along with FreeRTOS; if not it 
    can be viewed here: http://www.freertos.org/a00114.html and also obtained 
    by writing to Richard Barry, contact details for whom are available on the
    FreeRTOS WEB site.
 
    1 tab == 4 spaces!
 
    http://www.FreeRTOS.org - Documentation, latest information, license and
    contact details.
 
    http://www.SafeRTOS.com - A version that is certified for use in safety
    critical systems.
 
    http://www.OpenRTOS.com - Commercial support, development, porting,
    licensing and training services.
*/
 
#include "FreeRTOSConfig.h"
 
#define portCONTEXT_SIZE 132
#define portEPC_STACK_LOCATION	124
#define portSTATUS_STACK_LOCATION 128
 
/******************************************************************/ 	
.macro	portSAVE_CONTEXT
 
	/* Make room for the context. First save the current status so we can 
	manipulate it, and the cause and EPC registers so we capture their 
	original values in case of interrupt nesting. */
	mfc0		k0, _CP0_CAUSE
	addiu		sp,	sp, -portCONTEXT_SIZE
	mfc0		k1, _CP0_STATUS
 
	/* Also save s6 and s5 so we can use them during this interrupt.  Any
	nesting interrupts should maintain the values of these registers
	across the ISR. */
	sw			s6, 44(sp)
	sw			s5, 40(sp)
	sw			k1, portSTATUS_STACK_LOCATION(sp)
 
	/* Enable interrupts above the current priority. */
	srl			k0, k0, 0xa
	ins 		k1, k0, 10, 6
	ins			k1, zero, 1, 4
 
	/* s5 is used as the frame pointer. */
	add			s5, zero, sp
 
	/* Check the nesting count value. */
	la			k0, uxInterruptNesting
	lw			s6, (k0)
 
	/* If the nesting count is 0 then swap to the the system stack, otherwise
	the system stack is already being used. */
	bne			s6, zero, .+20
	nop
 
	/* Swap to the system stack. */
	la			sp, xISRStackTop
	lw			sp, (sp)
 
	/* Increment and save the nesting count. */
	addiu		s6, s6, 1
	sw			s6, 0(k0)
 
	/* s6 holds the EPC value, this is saved after interrupts are re-enabled. */
	mfc0 		s6, _CP0_EPC
 
	/* Re-enable interrupts. */
	mtc0		k1, _CP0_STATUS
 
	/* Save the context into the space just created.  s6 is saved again
	here as it now contains the EPC value.  No other s registers need be
	saved. */
	sw			ra,	120(s5)
	sw			s8, 116(s5)
	sw			t9, 112(s5)
	sw			t8,	108(s5)
	sw			t7,	104(s5)
	sw			t6, 100(s5)
	sw			t5, 96(s5)
	sw			t4, 92(s5)
	sw			t3, 88(s5)
	sw			t2, 84(s5)
	sw			t1, 80(s5)
	sw			t0, 76(s5)
	sw			a3, 72(s5)
	sw			a2, 68(s5)
	sw			a1, 64(s5)
	sw			a0, 60(s5)
	sw			v1, 56(s5)
	sw			v0, 52(s5)
	sw			s6, portEPC_STACK_LOCATION(s5)
	sw			$1, 16(s5)
 
	/* s6 is used as a scratch register. */
	mfhi		s6
	sw			s6, 12(s5)
	mflo		s6
	sw			s6, 8(s5)
 
	/* Update the task stack pointer value if nesting is zero. */
	la			s6, uxInterruptNesting
	lw			s6, (s6)
	addiu		s6, s6, -1
	bne			s6, zero, .+20
	nop
 
	/* Save the stack pointer. */
	la			s6, uxSavedTaskStackPointer
	sw			s5, (s6)
 
	.endm
 
/******************************************************************/	
.macro	portRESTORE_CONTEXT
 
	/* Restore the stack pointer from the TCB.  This is only done if the
	nesting count is 1. */
	la			s6, uxInterruptNesting
	lw			s6, (s6)
	addiu		s6, s6, -1
	bne			s6, zero, .+20
	nop
	la			s6, uxSavedTaskStackPointer
	lw			s5, (s6)
 
	/* Restore the context. */
	lw			s6, 8(s5)
	mtlo		s6
	lw			s6, 12(s5)
	mthi		s6
	lw			$1, 16(s5)
	/* s6 is loaded as it was used as a scratch register and therefore saved
	as part of the interrupt context. */
	lw			s6, 44(s5)
	lw			v0, 52(s5)
	lw			v1, 56(s5)
	lw			a0, 60(s5)
	lw			a1, 64(s5)
	lw			a2, 68(s5)
	lw			a3, 72(s5)
	lw			t0, 76(s5)
	lw			t1, 80(s5)
	lw			t2, 84(s5)
	lw			t3, 88(s5)
	lw			t4, 92(s5)
	lw			t5, 96(s5)
	lw			t6, 100(s5)
	lw			t7, 104(s5)
	lw			t8, 108(s5)
	lw			t9, 112(s5)
	lw			s8, 116(s5)
	lw			ra, 120(s5)
 
	/* Protect access to the k registers, and others. */
	di
 
	/* Decrement the nesting count. */
	la			k0, uxInterruptNesting
	lw			k1, (k0)
	addiu		k1, k1, -1
	sw			k1, 0(k0)
 
	lw			k0, portSTATUS_STACK_LOCATION(s5)
	lw			k1, portEPC_STACK_LOCATION(s5)
 
	/* Leave the stack how we found it.  First load sp from s5, then restore
	s5 from the stack. */
	add			sp, zero, s5
	lw			s5, 40(sp)
	addiu		sp,	sp,	portCONTEXT_SIZE
 
	mtc0		k0, _CP0_STATUS
	ehb
	mtc0 		k1, _CP0_EPC
	eret 
	nop
 
	.endm
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.