OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Source/] [portable/] [MPLAB/] [PIC32MX/] [port_asm.S] - Rev 572

Compare with Previous | Blame | View Log

/*
    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.

    ***************************************************************************
    *                                                                         *
    * If you are:                                                             *
    *                                                                         *
    *    + New to FreeRTOS,                                                   *
    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *
    *    + Looking for basic training,                                        *
    *    + Wanting to improve your FreeRTOS skills and productivity           *
    *                                                                         *
    * then take a look at the FreeRTOS books - available as PDF or paperback  *
    *                                                                         *
    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *
    *                  http://www.FreeRTOS.org/Documentation                  *
    *                                                                         *
    * A pdf reference manual is also available.  Both are usually delivered   *
    * to your inbox within 20 minutes to two hours when purchased between 8am *
    * and 8pm GMT (although please allow up to 24 hours in case of            *
    * exceptional circumstances).  Thank you for your support!                *
    *                                                                         *
    ***************************************************************************

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
    ***NOTE*** The exception to the GPL is included to allow you to distribute
    a combined work that includes FreeRTOS without being obliged to provide the
    source code for proprietary components outside of the FreeRTOS kernel.
    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
    more details. You should have received a copy of the GNU General Public 
    License and the FreeRTOS license exception along with FreeRTOS; if not it 
    can be viewed here: http://www.freertos.org/a00114.html and also obtained 
    by writing to Richard Barry, contact details for whom are available on the
    FreeRTOS WEB site.

    1 tab == 4 spaces!

    http://www.FreeRTOS.org - Documentation, latest information, license and
    contact details.

    http://www.SafeRTOS.com - A version that is certified for use in safety
    critical systems.

    http://www.OpenRTOS.com - Commercial support, development, porting,
    licensing and training services.
*/
 
#include <p32xxxx.h>
#include <sys/asm.h>
#include "ISR_Support.h"
 

        .set    nomips16
        .set    noreorder
        
        .extern pxCurrentTCB
        .extern vTaskSwitchContext
        .extern vPortIncrementTick
        .extern xISRStackTop
        
        .global vPortStartFirstTask
        .global vPortYieldISR
        .global vT1InterruptHandler


/******************************************************************/

        .section        .FreeRTOS, "ax", @progbits
        .set            noreorder
        .set            noat
        .ent            vT1InterruptHandler
        
vT1InterruptHandler:

        portSAVE_CONTEXT

        jal             vPortIncrementTick
        nop

        portRESTORE_CONTEXT

        .end vT1InterruptHandler

/******************************************************************/

        .section        .FreeRTOS, "ax", @progbits
        .set            noreorder
        .set            noat
        .ent            xPortStartScheduler

vPortStartFirstTask:

        /* Simply restore the context of the highest priority task that has been
        created so far. */
        portRESTORE_CONTEXT

        .end xPortStartScheduler



/*******************************************************************/

        .section        .FreeRTOS, "ax", @progbits
        .set            noreorder
        .set            noat
        .ent            vPortYieldISR

vPortYieldISR:

        /* Make room for the context. First save the current status so we can 
        manipulate it, and the cause and EPC registers so we capture their 
        original values in case of interrupt nesting. */
        mfc0            k0, _CP0_CAUSE
        addiu           sp,     sp, -portCONTEXT_SIZE
        mfc0            k1, _CP0_STATUS

        /* Also save s6 and s5 so we can use them during this interrupt.  Any
        nesting interrupts should maintain the values of these registers
        across the ISR. */
        sw                      s6, 44(sp)
        sw                      s5, 40(sp)
        sw                      k1, portSTATUS_STACK_LOCATION(sp)

        /* Enable interrupts above the current priority. */
        srl                     k0, k0, 0xa
        ins             k1, k0, 10, 6
        ins                     k1, zero, 1, 4

        /* s5 is used as the frame pointer. */
        add                     s5, zero, sp

        /* Swap to the system stack.  This is not conditional on the nesting
        count as this interrupt is always the lowest priority and therefore
        the nesting is always 0. */
        la                      sp, xISRStackTop
        lw                      sp, (sp)

        /* Set the nesting count. */
        la                      k0, uxInterruptNesting
        addiu           s6, zero, 1
        sw                      s6, 0(k0)

        /* s6 holds the EPC value, this is saved with the rest of the context
        after interrupts are enabled. */
        mfc0            s6, _CP0_EPC

        /* Re-enable interrupts. */
        mtc0            k1, _CP0_STATUS

        /* Save the context into the space just created.  s6 is saved again
        here as it now contains the EPC value. */
        sw                      ra,     120(s5)
        sw                      s8, 116(s5)
        sw                      t9, 112(s5)
        sw                      t8,     108(s5)
        sw                      t7,     104(s5)
        sw                      t6, 100(s5)
        sw                      t5, 96(s5)
        sw                      t4, 92(s5)
        sw                      t3, 88(s5)
        sw                      t2, 84(s5)
        sw                      t1, 80(s5)
        sw                      t0, 76(s5)
        sw                      a3, 72(s5)
        sw                      a2, 68(s5)
        sw                      a1, 64(s5)
        sw                      a0, 60(s5)
        sw                      v1, 56(s5)
        sw                      v0, 52(s5)
        sw                      s7, 48(s5)
        sw                      s6, portEPC_STACK_LOCATION(s5)
        /* s5 and s6 has already been saved. */
        sw                      s4,     36(s5)
        sw                      s3, 32(s5)
        sw                      s2, 28(s5)
        sw                      s1, 24(s5)
        sw                      s0, 20(s5)
        sw                      $1, 16(s5)

        /* s7 is used as a scratch register as this should always be saved across
        nesting interrupts. */
        mfhi            s7
        sw                      s7, 12(s5)
        mflo            s7
        sw                      s7, 8(s5)

        /* Save the stack pointer to the task. */
        la                      s7, pxCurrentTCB
        lw                      s7, (s7)
        sw                      s5, (s7)

        /* Set the interrupt mask to the max priority that can use the API. */
        di
        mfc0            s7, _CP0_STATUS
        ori                     s7, s7, 1
        ori                     s6, s7, configMAX_SYSCALL_INTERRUPT_PRIORITY << 10

        /* This mtc0 re-enables interrupts, but only above 
        configMAX_SYSCALL_INTERRUPT_PRIORITY. */
        mtc0            s6, _CP0_STATUS

        /* Clear the software interrupt in the core. */
        mfc0            s6, _CP0_CAUSE
        addiu       s4,zero,-257
        and                     s6, s6, s4
        mtc0            s6, _CP0_CAUSE

        /* Clear the interrupt in the interrupt controller. */
        la                      s6, IFS0CLR
        addiu           s4, zero, 2
        sw                      s4, (s6)

        jal                     vTaskSwitchContext
        nop

        /* Clear the interrupt mask again.  The saved status value is still in s7. */
        mtc0            s7, _CP0_STATUS

        /* Restore the stack pointer from the TCB. */
        la                      s0, pxCurrentTCB
        lw                      s0, (s0)
        lw                      s5, (s0)

        /* Restore the rest of the context. */
        lw                      s0, 8(s5)
        mtlo            s0
        lw                      s0, 12(s5)
        mthi            s0
        lw                      $1, 16(s5)
        lw                      s0, 20(s5)
        lw                      s1, 24(s5)
        lw                      s2, 28(s5)
        lw                      s3, 32(s5)
        lw                      s4, 36(s5)
        /* s5 is loaded later. */
        lw                      s6, 44(s5)
        lw                      s7, 48(s5)
        lw                      v0, 52(s5)
        lw                      v1, 56(s5)
        lw                      a0, 60(s5)
        lw                      a1, 64(s5)
        lw                      a2, 68(s5)
        lw                      a3, 72(s5)
        lw                      t0, 76(s5)
        lw                      t1, 80(s5)
        lw                      t2, 84(s5)
        lw                      t3, 88(s5)
        lw                      t4, 92(s5)
        lw                      t5, 96(s5)
        lw                      t6, 100(s5)
        lw                      t7, 104(s5)
        lw                      t8, 108(s5)
        lw                      t9, 112(s5)
        lw                      s8, 116(s5)
        lw                      ra, 120(s5)

        /* Protect access to the k registers, and others. */
        di

        /* Set nesting back to zero.  As the lowest priority interrupt this
        interrupt cannot have nested. */
        la                      k0, uxInterruptNesting
        sw                      zero, 0(k0)

        /* Switch back to use the real stack pointer. */
        add                     sp, zero, s5

        /* Restore the real s5 value. */
        lw                      s5, 40(sp)

        /* Pop the status and epc values. */
        lw                      k1, portSTATUS_STACK_LOCATION(sp)
        lw                      k0, portEPC_STACK_LOCATION(sp)

        /* Remove stack frame. */
        addiu           sp,     sp,     portCONTEXT_SIZE

        mtc0            k1, _CP0_STATUS
        ehb     
        mtc0            k0, _CP0_EPC
        eret 
        nop

        .end            vPortYieldISR



Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.