URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Source/] [portable/] [Renesas/] [RX600/] [portmacro.h] - Rev 664
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ #ifndef PORTMACRO_H #define PORTMACRO_H #ifdef __cplusplus extern "C" { #endif /* Hardware specifics. */ #include "machine.h" /*----------------------------------------------------------- * Port specific definitions. * * The settings in this file configure FreeRTOS correctly for the * given hardware and compiler. * * These settings should not be altered. *----------------------------------------------------------- */ /* Type definitions - these are a bit legacy and not really used now, other than portSTACK_TYPE and portBASE_TYPE. */ #define portCHAR char #define portFLOAT float #define portDOUBLE double #define portLONG long #define portSHORT short #define portSTACK_TYPE unsigned portLONG #define portBASE_TYPE long #if( configUSE_16_BIT_TICKS == 1 ) typedef unsigned portSHORT portTickType; #define portMAX_DELAY ( portTickType ) 0xffff #else typedef unsigned portLONG portTickType; #define portMAX_DELAY ( portTickType ) 0xffffffff #endif /*-----------------------------------------------------------*/ /* Hardware specifics. */ #define portBYTE_ALIGNMENT 8 /* Could make four, according to manual. */ #define portSTACK_GROWTH -1 #define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ ) #define portNOP() nop() /* The location of the software interrupt register. Software interrupts use vector 27. */ #define portITU_SWINTR ( ( unsigned char * ) 0x000872E0 ) #define portYIELD() *portITU_SWINTR = 0x01; nop(); nop(); nop(); nop(); nop() #define portYIELD_FROM_ISR( x ) if( x != pdFALSE ) portYIELD() /* * These macros should be called directly, but through the taskENTER_CRITICAL() * and taskEXIT_CRITICAL() macros. */ #define portENABLE_INTERRUPTS() set_ipl( 0 ) #define portDISABLE_INTERRUPTS() set_ipl( configMAX_SYSCALL_INTERRUPT_PRIORITY ) /* Critical nesting counts are stored in the TCB. */ #define portCRITICAL_NESTING_IN_TCB ( 1 ) /* The critical nesting functions defined within tasks.c. */ extern void vTaskEnterCritical( void ); extern void vTaskExitCritical( void ); #define portENTER_CRITICAL() vTaskEnterCritical(); #define portEXIT_CRITICAL() vTaskExitCritical(); /* As this port allows interrupt nesting... */ #define portSET_INTERRUPT_MASK_FROM_ISR() get_ipl(); set_ipl( configMAX_SYSCALL_INTERRUPT_PRIORITY ) #define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus ) set_ipl( uxSavedInterruptStatus ) /*-----------------------------------------------------------*/ /* Task function macros as described on the FreeRTOS.org WEB site. */ #define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) #define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) #ifdef __cplusplus } #endif #endif /* PORTMACRO_H */
Go to most recent revision | Compare with Previous | Blame | View Log