URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [exec/] [score/] [cpu/] [sparc/] [cpu_asm.S] - Rev 593
Go to most recent revision | Compare with Previous | Blame | View Log
/* cpu_asm.s
*
* This file contains the basic algorithms for all assembly code used
* in an specific CPU port of RTEMS. These algorithms must be implemented
* in assembly language.
*
* COPYRIGHT (c) 1989-1999.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* Ported to ERC32 implementation of the SPARC by On-Line Applications
* Research Corporation (OAR) under contract to the European Space
* Agency (ESA).
*
* ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995.
* European Space Agency.
*
* $Id: cpu_asm.S,v 1.2 2001-09-27 11:59:30 chris Exp $
*/
#include <asm.h>
#if (SPARC_HAS_FPU == 1)
/*
* void _CPU_Context_save_fp(
* void **fp_context_ptr
* )
*
* This routine is responsible for saving the FP context
* at *fp_context_ptr. If the point to load the FP context
* from is changed then the pointer is modified by this routine.
*
* NOTE: See the README in this directory for information on the
* management of the "EF" bit in the PSR.
*/
.align 4
PUBLIC(_CPU_Context_save_fp)
SYM(_CPU_Context_save_fp):
save %sp, -CPU_MINIMUM_STACK_FRAME_SIZE, %sp
/*
* The following enables the floating point unit.
*/
mov %psr, %l0
sethi %hi(SPARC_PSR_EF_MASK), %l1
or %l1, %lo(SPARC_PSR_EF_MASK), %l1
or %l0, %l1, %l0
mov %l0, %psr ! **** ENABLE FLOAT ACCESS ****
ld [%i0], %l0
std %f0, [%l0 + FO_F1_OFFSET]
std %f2, [%l0 + F2_F3_OFFSET]
std %f4, [%l0 + F4_F5_OFFSET]
std %f6, [%l0 + F6_F7_OFFSET]
std %f8, [%l0 + F8_F9_OFFSET]
std %f10, [%l0 + F1O_F11_OFFSET]
std %f12, [%l0 + F12_F13_OFFSET]
std %f14, [%l0 + F14_F15_OFFSET]
std %f16, [%l0 + F16_F17_OFFSET]
std %f18, [%l0 + F18_F19_OFFSET]
std %f20, [%l0 + F2O_F21_OFFSET]
std %f22, [%l0 + F22_F23_OFFSET]
std %f24, [%l0 + F24_F25_OFFSET]
std %f26, [%l0 + F26_F27_OFFSET]
std %f28, [%l0 + F28_F29_OFFSET]
std %f30, [%l0 + F3O_F31_OFFSET]
st %fsr, [%l0 + FSR_OFFSET]
ret
restore
/*
* void _CPU_Context_restore_fp(
* void **fp_context_ptr
* )
*
* This routine is responsible for restoring the FP context
* at *fp_context_ptr. If the point to load the FP context
* from is changed then the pointer is modified by this routine.
*
* NOTE: See the README in this directory for information on the
* management of the "EF" bit in the PSR.
*/
.align 4
PUBLIC(_CPU_Context_restore_fp)
SYM(_CPU_Context_restore_fp):
save %sp, -CPU_MINIMUM_STACK_FRAME_SIZE , %sp
/*
* The following enables the floating point unit.
*/
mov %psr, %l0
sethi %hi(SPARC_PSR_EF_MASK), %l1
or %l1, %lo(SPARC_PSR_EF_MASK), %l1
or %l0, %l1, %l0
mov %l0, %psr ! **** ENABLE FLOAT ACCESS ****
ld [%i0], %l0
ldd [%l0 + FO_F1_OFFSET], %f0
ldd [%l0 + F2_F3_OFFSET], %f2
ldd [%l0 + F4_F5_OFFSET], %f4
ldd [%l0 + F6_F7_OFFSET], %f6
ldd [%l0 + F8_F9_OFFSET], %f8
ldd [%l0 + F1O_F11_OFFSET], %f10
ldd [%l0 + F12_F13_OFFSET], %f12
ldd [%l0 + F14_F15_OFFSET], %f14
ldd [%l0 + F16_F17_OFFSET], %f16
ldd [%l0 + F18_F19_OFFSET], %f18
ldd [%l0 + F2O_F21_OFFSET], %f20
ldd [%l0 + F22_F23_OFFSET], %f22
ldd [%l0 + F24_F25_OFFSET], %f24
ldd [%l0 + F26_F27_OFFSET], %f26
ldd [%l0 + F28_F29_OFFSET], %f28
ldd [%l0 + F3O_F31_OFFSET], %f30
ld [%l0 + FSR_OFFSET], %fsr
ret
restore
#endif /* SPARC_HAS_FPU */
/*
* void _CPU_Context_switch(
* Context_Control *run,
* Context_Control *heir
* )
*
* This routine performs a normal non-FP context switch.
*/
.align 4
PUBLIC(_CPU_Context_switch)
SYM(_CPU_Context_switch):
! skip g0
st %g1, [%o0 + G1_OFFSET] ! save the global registers
std %g2, [%o0 + G2_OFFSET]
std %g4, [%o0 + G4_OFFSET]
std %g6, [%o0 + G6_OFFSET]
std %l0, [%o0 + L0_OFFSET] ! save the local registers
std %l2, [%o0 + L2_OFFSET]
std %l4, [%o0 + L4_OFFSET]
std %l6, [%o0 + L6_OFFSET]
std %i0, [%o0 + I0_OFFSET] ! save the input registers
std %i2, [%o0 + I2_OFFSET]
std %i4, [%o0 + I4_OFFSET]
std %i6, [%o0 + I6_FP_OFFSET]
std %o0, [%o0 + O0_OFFSET] ! save the output registers
std %o2, [%o0 + O2_OFFSET]
std %o4, [%o0 + O4_OFFSET]
std %o6, [%o0 + O6_SP_OFFSET]
rd %psr, %o2
st %o2, [%o0 + PSR_OFFSET] ! save status register
/*
* This is entered from _CPU_Context_restore with:
* o1 = context to restore
* o2 = psr
*/
PUBLIC(_CPU_Context_restore_heir)
SYM(_CPU_Context_restore_heir):
/*
* Flush all windows with valid contents except the current one.
* In examining the set register windows, one may logically divide
* the windows into sets (some of which may be empty) based on their
* current status:
*
* + current (i.e. in use),
* + used (i.e. a restore would not trap)
* + invalid (i.e. 1 in corresponding bit in WIM)
* + unused
*
* Either the used or unused set of windows may be empty.
*
* NOTE: We assume only one bit is set in the WIM at a time.
*
* Given a CWP of 5 and a WIM of 0x1, the registers are divided
* into sets as follows:
*
* + 0 - invalid
* + 1-4 - unused
* + 5 - current
* + 6-7 - used
*
* In this case, we only would save the used windows -- 6 and 7.
*
* Traps are disabled for the same logical period as in a
* flush all windows trap handler.
*
* Register Usage while saving the windows:
* g1 = current PSR
* g2 = current wim
* g3 = CWP
* g4 = wim scratch
* g5 = scratch
*/
ld [%o1 + PSR_OFFSET], %g1 ! g1 = saved psr
and %o2, SPARC_PSR_CWP_MASK, %g3 ! g3 = CWP
! g1 = psr w/o cwp
andn %g1, SPARC_PSR_ET_MASK | SPARC_PSR_CWP_MASK, %g1
or %g1, %g3, %g1 ! g1 = heirs psr
mov %g1, %psr ! restore status register and
! **** DISABLE TRAPS ****
mov %wim, %g2 ! g2 = wim
mov 1, %g4
sll %g4, %g3, %g4 ! g4 = WIM mask for CW invalid
save_frame_loop:
sll %g4, 1, %g5 ! rotate the "wim" left 1
srl %g4, SPARC_NUMBER_OF_REGISTER_WINDOWS - 1, %g4
or %g4, %g5, %g4 ! g4 = wim if we do one restore
/*
* If a restore would not underflow, then continue.
*/
andcc %g4, %g2, %g0 ! Any windows to flush?
bnz done_flushing ! No, then continue
nop
restore ! back one window
/*
* Now save the window just as if we overflowed to it.
*/
std %l0, [%sp + CPU_STACK_FRAME_L0_OFFSET]
std %l2, [%sp + CPU_STACK_FRAME_L2_OFFSET]
std %l4, [%sp + CPU_STACK_FRAME_L4_OFFSET]
std %l6, [%sp + CPU_STACK_FRAME_L6_OFFSET]
std %i0, [%sp + CPU_STACK_FRAME_I0_OFFSET]
std %i2, [%sp + CPU_STACK_FRAME_I2_OFFSET]
std %i4, [%sp + CPU_STACK_FRAME_I4_OFFSET]
std %i6, [%sp + CPU_STACK_FRAME_I6_FP_OFFSET]
ba save_frame_loop
nop
done_flushing:
add %g3, 1, %g3 ! calculate desired WIM
and %g3, SPARC_NUMBER_OF_REGISTER_WINDOWS - 1, %g3
mov 1, %g4
sll %g4, %g3, %g4 ! g4 = new WIM
mov %g4, %wim
or %g1, SPARC_PSR_ET_MASK, %g1
mov %g1, %psr ! **** ENABLE TRAPS ****
! and restore CWP
nop
nop
nop
! skip g0
ld [%o1 + G1_OFFSET], %g1 ! restore the global registers
ldd [%o1 + G2_OFFSET], %g2
ldd [%o1 + G4_OFFSET], %g4
ldd [%o1 + G6_OFFSET], %g6
ldd [%o1 + L0_OFFSET], %l0 ! restore the local registers
ldd [%o1 + L2_OFFSET], %l2
ldd [%o1 + L4_OFFSET], %l4
ldd [%o1 + L6_OFFSET], %l6
ldd [%o1 + I0_OFFSET], %i0 ! restore the output registers
ldd [%o1 + I2_OFFSET], %i2
ldd [%o1 + I4_OFFSET], %i4
ldd [%o1 + I6_FP_OFFSET], %i6
ldd [%o1 + O2_OFFSET], %o2 ! restore the output registers
ldd [%o1 + O4_OFFSET], %o4
ldd [%o1 + O6_SP_OFFSET], %o6
! do o0/o1 last to avoid destroying heir context pointer
ldd [%o1 + O0_OFFSET], %o0 ! overwrite heir pointer
jmp %o7 + 8 ! return
nop ! delay slot
/*
* void _CPU_Context_restore(
* Context_Control *new_context
* )
*
* This routine is generally used only to perform restart self.
*
* NOTE: It is unnecessary to reload some registers.
*/
.align 4
PUBLIC(_CPU_Context_restore)
SYM(_CPU_Context_restore):
save %sp, -CPU_MINIMUM_STACK_FRAME_SIZE, %sp
rd %psr, %o2
ba SYM(_CPU_Context_restore_heir)
mov %i0, %o1 ! in the delay slot
/*
* void _ISR_Handler()
*
* This routine provides the RTEMS interrupt management.
*
* We enter this handler from the 4 instructions in the trap table with
* the following registers assumed to be set as shown:
*
* l0 = PSR
* l1 = PC
* l2 = nPC
* l3 = trap type
*
* NOTE: By an executive defined convention, trap type is between 0 and 255 if
* it is an asynchonous trap and 256 and 511 if it is synchronous.
*/
.align 4
PUBLIC(_ISR_Handler)
SYM(_ISR_Handler):
/*
* Fix the return address for synchronous traps.
*/
andcc %l3, SPARC_SYNCHRONOUS_TRAP_BIT_MASK, %g0
! Is this a synchronous trap?
be,a win_ovflow ! No, then skip the adjustment
nop ! DELAY
mov %l1, %l6 ! save trapped pc for debug info
mov %l2, %l1 ! do not return to the instruction
add %l2, 4, %l2 ! indicated
win_ovflow:
/*
* Save the globals this block uses.
*
* These registers are not restored from the locals. Their contents
* are saved directly from the locals into the ISF below.
*/
mov %g4, %l4 ! save the globals this block uses
mov %g5, %l5
/*
* When at a "window overflow" trap, (wim == (1 << cwp)).
* If we get here like that, then process a window overflow.
*/
rd %wim, %g4
srl %g4, %l0, %g5 ! g5 = win >> cwp ; shift count and CWP
! are LS 5 bits ; how convenient :)
cmp %g5, 1 ! Is this an invalid window?
bne dont_do_the_window ! No, then skip all this stuff
! we are using the delay slot
/*
* The following is same as a 1 position right rotate of WIM
*/
srl %g4, 1, %g5 ! g5 = WIM >> 1
sll %g4, SPARC_NUMBER_OF_REGISTER_WINDOWS-1 , %g4
! g4 = WIM << (Number Windows - 1)
or %g4, %g5, %g4 ! g4 = (WIM >> 1) |
! (WIM << (Number Windows - 1))
/*
* At this point:
*
* g4 = the new WIM
* g5 is free
*/
/*
* Since we are tinkering with the register windows, we need to
* make sure that all the required information is in global registers.
*/
save ! Save into the window
wr %g4, 0, %wim ! WIM = new WIM
nop ! delay slots
nop
nop
/*
* Now save the window just as if we overflowed to it.
*/
std %l0, [%sp + CPU_STACK_FRAME_L0_OFFSET]
std %l2, [%sp + CPU_STACK_FRAME_L2_OFFSET]
std %l4, [%sp + CPU_STACK_FRAME_L4_OFFSET]
std %l6, [%sp + CPU_STACK_FRAME_L6_OFFSET]
std %i0, [%sp + CPU_STACK_FRAME_I0_OFFSET]
std %i2, [%sp + CPU_STACK_FRAME_I2_OFFSET]
std %i4, [%sp + CPU_STACK_FRAME_I4_OFFSET]
std %i6, [%sp + CPU_STACK_FRAME_I6_FP_OFFSET]
restore
nop
dont_do_the_window:
/*
* Global registers %g4 and %g5 are saved directly from %l4 and
* %l5 directly into the ISF below.
*/
save_isf:
/*
* Save the state of the interrupted task -- especially the global
* registers -- in the Interrupt Stack Frame. Note that the ISF
* includes a regular minimum stack frame which will be used if
* needed by register window overflow and underflow handlers.
*
* REGISTERS SAME AS AT _ISR_Handler
*/
sub %fp, CONTEXT_CONTROL_INTERRUPT_FRAME_SIZE, %sp
! make space for ISF
std %l0, [%sp + ISF_PSR_OFFSET] ! save psr, PC
st %l2, [%sp + ISF_NPC_OFFSET] ! save nPC
st %g1, [%sp + ISF_G1_OFFSET] ! save g1
std %g2, [%sp + ISF_G2_OFFSET] ! save g2, g3
std %l4, [%sp + ISF_G4_OFFSET] ! save g4, g5 -- see above
std %g6, [%sp + ISF_G6_OFFSET] ! save g6, g7
std %i0, [%sp + ISF_I0_OFFSET] ! save i0, i1
std %i2, [%sp + ISF_I2_OFFSET] ! save i2, i3
std %i4, [%sp + ISF_I4_OFFSET] ! save i4, i5
std %i6, [%sp + ISF_I6_FP_OFFSET] ! save i6/fp, i7
rd %y, %g1
st %g1, [%sp + ISF_Y_OFFSET] ! save y
st %l6, [%sp + ISF_TPC_OFFSET] ! save real trapped pc
mov %sp, %o1 ! 2nd arg to ISR Handler
/*
* Increment ISR nest level and Thread dispatch disable level.
*
* Register usage for this section:
*
* l4 = _Thread_Dispatch_disable_level pointer
* l5 = _ISR_Nest_level pointer
* l6 = _Thread_Dispatch_disable_level value
* l7 = _ISR_Nest_level value
*
* NOTE: It is assumed that l4 - l7 will be preserved until the ISR
* nest and thread dispatch disable levels are unnested.
*/
sethi %hi(SYM(_Thread_Dispatch_disable_level)), %l4
ld [%l4 + %lo(SYM(_Thread_Dispatch_disable_level))], %l6
sethi %hi(SYM(_ISR_Nest_level)), %l5
ld [%l5 + %lo(SYM(_ISR_Nest_level))], %l7
add %l6, 1, %l6
st %l6, [%l4 + %lo(SYM(_Thread_Dispatch_disable_level))]
add %l7, 1, %l7
st %l7, [%l5 + %lo(SYM(_ISR_Nest_level))]
/*
* If ISR nest level was zero (now 1), then switch stack.
*/
mov %sp, %fp
subcc %l7, 1, %l7 ! outermost interrupt handler?
bnz dont_switch_stacks ! No, then do not switch stacks
sethi %hi(SYM(_CPU_Interrupt_stack_high)), %g4
ld [%g4 + %lo(SYM(_CPU_Interrupt_stack_high))], %sp
dont_switch_stacks:
/*
* Make sure we have a place on the stack for the window overflow
* trap handler to write into. At this point it is safe to
* enable traps again.
*/
sub %sp, CPU_MINIMUM_STACK_FRAME_SIZE, %sp
/*
* Check if we have an external interrupt (trap 0x11 - 0x1f). If so,
* set the PIL in the %psr to mask off interrupts with lower priority.
* The original %psr in %l0 is not modified since it will be restored
* when the interrupt handler returns.
*/
/* This is a fix for ERC32 with FPU rev.B or rev.C */
#if defined(FPU_REVB)
mov %l0, %g5
and %l3, 0x0ff, %g4
subcc %g4, 0x08, %g0
be fpu_revb
subcc %g4, 0x11, %g0
bl dont_fix_pil
subcc %g4, 0x1f, %g0
bg dont_fix_pil
sll %g4, 8, %g4
and %g4, SPARC_PSR_PIL_MASK, %g4
andn %l0, SPARC_PSR_PIL_MASK, %g5
or %g4, %g5, %g5
srl %l0, 12, %g4
andcc %g4, 1, %g0
be dont_fix_pil
nop
ba,a enable_irq
fpu_revb:
srl %l0, 12, %g4 ! check if EF is set in %psr
andcc %g4, 1, %g0
be dont_fix_pil ! if FPU disabled than continue as normal
and %l3, 0xff, %g4
subcc %g4, 0x08, %g0
bne enable_irq ! if not a FPU exception then do two fmovs
set __sparc_fq, %g4
st %fsr, [%g4] ! if FQ is not empty and FQ[1] = fmovs
ld [%g4], %g4 ! than this is bug 3.14
srl %g4, 13, %g4
andcc %g4, 1, %g0
be dont_fix_pil
set __sparc_fq, %g4
std %fq, [%g4]
ld [%g4+4], %g4
set 0x81a00020, %g5
subcc %g4, %g5, %g0
bne,a dont_fix_pil2
wr %l0, SPARC_PSR_ET_MASK, %psr ! **** ENABLE TRAPS ****
ba,a simple_return
enable_irq:
or %g5, SPARC_PSR_PIL_MASK, %g4
wr %g4, SPARC_PSR_ET_MASK, %psr ! **** ENABLE TRAPS ****
nop; nop; nop
fmovs %f0, %f0
ba dont_fix_pil
fmovs %f0, %f0
.data
.global __sparc_fq
.align 8
__sparc_fq:
.word 0,0
.text
/* end of ERC32 FPU rev.B/C fix */
#else
mov %l0, %g5
subcc %g4, 0x11, %g0
bl dont_fix_pil
subcc %g4, 0x1f, %g0
bg dont_fix_pil
sll %g4, 8, %g4
and %g4, SPARC_PSR_PIL_MASK, %g4
andn %l0, SPARC_PSR_PIL_MASK, %g5
or %g4, %g5, %g5
#endif
dont_fix_pil:
wr %g5, SPARC_PSR_ET_MASK, %psr ! **** ENABLE TRAPS ****
dont_fix_pil2:
/*
* Vector to user's handler.
*
* NOTE: TBR may no longer have vector number in it since
* we just enabled traps. It is definitely in l3.
*/
sethi %hi(SYM(_ISR_Vector_table)), %g4
or %g4, %lo(SYM(_ISR_Vector_table)), %g4
and %l3, 0xFF, %g5 ! remove synchronous trap indicator
sll %g5, 2, %g5 ! g5 = offset into table
ld [%g4 + %g5], %g4 ! g4 = _ISR_Vector_table[ vector ]
! o1 = 2nd arg = address of the ISF
! WAS LOADED WHEN ISF WAS SAVED!!!
mov %l3, %o0 ! o0 = 1st arg = vector number
call %g4, 0
nop ! delay slot
/*
* Redisable traps so we can finish up the interrupt processing.
* This is a VERY conservative place to do this.
*
* NOTE: %l0 has the PSR which was in place when we took the trap.
*/
mov %l0, %psr ! **** DISABLE TRAPS ****
/*
* Decrement ISR nest level and Thread dispatch disable level.
*
* Register usage for this section:
*
* l4 = _Thread_Dispatch_disable_level pointer
* l5 = _ISR_Nest_level pointer
* l6 = _Thread_Dispatch_disable_level value
* l7 = _ISR_Nest_level value
*/
sub %l6, 1, %l6
st %l6, [%l4 + %lo(SYM(_Thread_Dispatch_disable_level))]
st %l7, [%l5 + %lo(SYM(_ISR_Nest_level))]
/*
* If dispatching is disabled (includes nested interrupt case),
* then do a "simple" exit.
*/
orcc %l6, %g0, %g0 ! Is dispatching disabled?
bnz simple_return ! Yes, then do a "simple" exit
nop ! delay slot
/*
* If a context switch is necessary, then do fudge stack to
* return to the interrupt dispatcher.
*/
sethi %hi(SYM(_Context_Switch_necessary)), %l4
ld [%l4 + %lo(SYM(_Context_Switch_necessary))], %l5
orcc %l5, %g0, %g0 ! Is thread switch necessary?
bnz SYM(_ISR_Dispatch) ! yes, then invoke the dispatcher
nop ! delay slot
/*
* Finally, check to see if signals were sent to the currently
* executing task. If so, we need to invoke the interrupt dispatcher.
*/
sethi %hi(SYM(_ISR_Signals_to_thread_executing)), %l6
ld [%l6 + %lo(SYM(_ISR_Signals_to_thread_executing))], %l7
orcc %l7, %g0, %g0 ! Were signals sent to the currently
! executing thread?
bz simple_return ! yes, then invoke the dispatcher
! use the delay slot to clear the signals
! to the currently executing task flag
st %g0, [%l6 + %lo(SYM(_ISR_Signals_to_thread_executing))]
/*
* Invoke interrupt dispatcher.
*/
PUBLIC(_ISR_Dispatch)
SYM(_ISR_Dispatch):
/*
* The following subtract should get us back on the interrupted
* tasks stack and add enough room to invoke the dispatcher.
* When we enable traps, we are mostly back in the context
* of the task and subsequent interrupts can operate normally.
*/
sub %fp, CPU_MINIMUM_STACK_FRAME_SIZE, %sp
or %l0, SPARC_PSR_ET_MASK, %l7 ! l7 = PSR with ET=1
mov %l7, %psr ! **** ENABLE TRAPS ****
nop
nop
nop
call SYM(_Thread_Dispatch), 0
nop
/*
* The CWP in place at this point may be different from
* that which was in effect at the beginning of the ISR if we
* have been context switched between the beginning of this invocation
* of _ISR_Handler and this point. Thus the CWP and WIM should
* not be changed back to their values at ISR entry time. Any
* changes to the PSR must preserve the CWP.
*/
simple_return:
ld [%fp + ISF_Y_OFFSET], %l5 ! restore y
wr %l5, 0, %y
ldd [%fp + ISF_PSR_OFFSET], %l0 ! restore psr, PC
ld [%fp + ISF_NPC_OFFSET], %l2 ! restore nPC
rd %psr, %l3
and %l3, SPARC_PSR_CWP_MASK, %l3 ! want "current" CWP
andn %l0, SPARC_PSR_CWP_MASK, %l0 ! want rest from task
or %l3, %l0, %l0 ! install it later...
andn %l0, SPARC_PSR_ET_MASK, %l0
/*
* Restore tasks global and out registers
*/
mov %fp, %g1
! g1 is restored later
ldd [%fp + ISF_G2_OFFSET], %g2 ! restore g2, g3
ldd [%fp + ISF_G4_OFFSET], %g4 ! restore g4, g5
ldd [%fp + ISF_G6_OFFSET], %g6 ! restore g6, g7
ldd [%fp + ISF_I0_OFFSET], %i0 ! restore i0, i1
ldd [%fp + ISF_I2_OFFSET], %i2 ! restore i2, i3
ldd [%fp + ISF_I4_OFFSET], %i4 ! restore i4, i5
ldd [%fp + ISF_I6_FP_OFFSET], %i6 ! restore i6/fp, i7
/*
* Registers:
*
* ALL global registers EXCEPT G1 and the input registers have
* already been restored and thuse off limits.
*
* The following is the contents of the local registers:
*
* l0 = original psr
* l1 = return address (i.e. PC)
* l2 = nPC
* l3 = CWP
*/
/*
* if (CWP + 1) is an invalid window then we need to reload it.
*
* WARNING: Traps should now be disabled
*/
mov %l0, %psr ! **** DISABLE TRAPS ****
nop
nop
nop
rd %wim, %l4
add %l0, 1, %l6 ! l6 = cwp + 1
and %l6, SPARC_PSR_CWP_MASK, %l6 ! do the modulo on it
srl %l4, %l6, %l5 ! l5 = win >> cwp + 1 ; shift count
! and CWP are conveniently LS 5 bits
cmp %l5, 1 ! Is tasks window invalid?
bne good_task_window
/*
* The following code is the same as a 1 position left rotate of WIM.
*/
sll %l4, 1, %l5 ! l5 = WIM << 1
srl %l4, SPARC_NUMBER_OF_REGISTER_WINDOWS-1 , %l4
! l4 = WIM >> (Number Windows - 1)
or %l4, %l5, %l4 ! l4 = (WIM << 1) |
! (WIM >> (Number Windows - 1))
/*
* Now restore the window just as if we underflowed to it.
*/
wr %l4, 0, %wim ! WIM = new WIM
nop ! must delay after writing WIM
nop
nop
restore ! now into the tasks window
ldd [%g1 + CPU_STACK_FRAME_L0_OFFSET], %l0
ldd [%g1 + CPU_STACK_FRAME_L2_OFFSET], %l2
ldd [%g1 + CPU_STACK_FRAME_L4_OFFSET], %l4
ldd [%g1 + CPU_STACK_FRAME_L6_OFFSET], %l6
ldd [%g1 + CPU_STACK_FRAME_I0_OFFSET], %i0
ldd [%g1 + CPU_STACK_FRAME_I2_OFFSET], %i2
ldd [%g1 + CPU_STACK_FRAME_I4_OFFSET], %i4
ldd [%g1 + CPU_STACK_FRAME_I6_FP_OFFSET], %i6
! reload of sp clobbers ISF
save ! Back to ISR dispatch window
good_task_window:
mov %l0, %psr ! **** DISABLE TRAPS ****
! and restore condition codes.
ld [%g1 + ISF_G1_OFFSET], %g1 ! restore g1
jmp %l1 ! transfer control and
rett %l2 ! go back to tasks window
/* end of file */
Go to most recent revision | Compare with Previous | Blame | View Log