OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [a29k/] [portsw/] [shmsupp/] [getcfg.c] - Rev 594

Go to most recent revision | Compare with Previous | Blame | View Log

/*  void Shm_Get_configuration( localnode, &shmcfg )
 *
 *  This routine initializes, if necessary, and returns a pointer
 *  to the Shared Memory Configuration Table for the XXX target.
 *
 *  INPUT PARAMETERS:
 *    localnode - local node number
 *    shmcfg    - address of pointer to SHM Config Table
 *
 *  OUTPUT PARAMETERS:
 *    *shmcfg   - pointer to SHM Config Table
 *
XXX: FIX THE COMMENTS BELOW WHEN THE CPU IS KNOWN
 *  NOTES:  The XYZ does not have an interprocessor interrupt.
 *
 *          The following table illustrates the configuration limitations:
 *
 *                                   BUS     MAX
 *                          MODE    ENDIAN  NODES
 *                        ========= ====== =======
 *                         POLLED    BIG    2+
 *                        INTERRUPT **** NOT SUPPORTED ****
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id: getcfg.c,v 1.2 2001-09-27 11:59:40 chris Exp $
 */
 
#include <rtems.h>
#include <bsp.h>
#include <shm_driver.h>
 
#ifndef lint
static char _sccsid[] = "@(#)getcfg.c 04/08/96     1.1\n";
#endif
 
/*
 *  configured if currently polling of interrupt driven
 */
 
#define INTERRUPT 0        /* XXX: */
#define POLLING   1        /* XXX: fix me -- is polling ONLY!!! */
 
 
shm_config_table BSP_shm_cfgtbl;
 
void Shm_Get_configuration(
  rtems_unsigned32   localnode,
  shm_config_table **shmcfg
)
{
   BSP_shm_cfgtbl.base         = 0x0;
   BSP_shm_cfgtbl.length       = 1 * MEGABYTE;
   BSP_shm_cfgtbl.format       = SHM_BIG;
 
   /*
    *  Override cause_intr or shm_isr if your target has
    *  special requirements.
    */
 
   BSP_shm_cfgtbl.cause_intr   = Shm_Cause_interrupt;
 
#ifdef NEUTRAL_BIG
   BSP_shm_cfgtbl.convert      = NULL_CONVERT;
#else
   BSP_shm_cfgtbl.convert      = CPU_swap_u32;
#endif
 
   BSP_shm_cfgtbl.poll_intr    = POLLED_MODE;
   BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT;
   BSP_shm_cfgtbl.Intr.value   = NO_INTERRUPT;
   BSP_shm_cfgtbl.Intr.length  = NO_INTERRUPT;
 
   *shmcfg = &BSP_shm_cfgtbl;
}
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.