URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [a29k/] [portsw/] [start/] [register.S] - Rev 30
Go to most recent revision | Compare with Previous | Blame | View Log
; /* @(#)register.s 1.1 96/05/23 08:57:34, TEI */;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Register Definitions and Usage Conventions;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; /* $Id: register.S,v 1.2 2001-09-27 11:59:42 chris Exp $ */;;* File information and includes..file "c_register.s".ident "@(#)register.s 1.1 96/05/23 08:57:34, TEI\n"; Basic guidelines for register distribution and usage are derived from; the AMD application notes. It would be best to stick with the conventions; laid out by AMD.; Application Note: Context Switching with 29000 Processor By Daniel Mann.;;*************************************************************************;;; Rule 1:; Gr1 is used as a pointer to the register stack; Lr1 is used as frame pointer;.reg regsp, gr1 ; Register Stack Pointer.reg fp, lr1 ; frame pointer.equ Rrsp, ®sp.equ Rfp, &fp.global Rrsp, Rfp;;*************************************************************************;;; Gr2-Gr63 are not implemented in silicon;;;*************************************************************************;;; Rule 2:; The registers GR64-GR95 are dedicated for operating system use.;; The register range GR64-GR95 i.e 32 Registers is furthur sub-divided as; follows...; gr64-gr67 interrupt handlers.; gr68-gr71 OS temporaries I; gr72-gr79 OS temporaries II; gr80-gr95 OS statics. Dedicated throughout the operation of a program.;; 32 Registers for Operating System Use.;;; Assigning Names to Interrupt Handlers Registers.;.reg OSint0, gr64.reg OSint1, gr65.reg OSint2, gr66.reg OSint3, gr67.equ ROSint0, &OSint0.equ ROSint1, &OSint1.equ ROSint2, &OSint2.equ ROSint3, &OSint3.global ROSint0, ROSint1, ROSint2, ROSint3.reg TrapReg, gr64 ; trap register.reg trapreg, gr64 ; trapreg.equ RTrapReg, &TrapReg.equ Rtrapreg, &trapreg.global RTrapReg, Rtrapreg;; Assigning Names to Scratch/Temporary Registers.;.reg OStmp0, gr68.reg OStmp1, gr69.reg OStmp2, gr70.reg OStmp3, gr71.reg OStmp4, gr72.reg OStmp5, gr73.reg OStmp6, gr74.reg OStmp7, gr75.reg OStmp8, gr76.reg OStmp9, gr77.reg OStmp10, gr78.reg OStmp11, gr79.equ ROStmp0, &OStmp0.equ ROStmp1, &OStmp1.equ ROStmp2, &OStmp2.equ ROStmp3, &OStmp3.equ ROStmp4, &OStmp4.equ ROStmp5, &OStmp5.equ ROStmp6, &OStmp6.equ ROStmp7, &OStmp7.equ ROStmp8, &OStmp8.equ ROStmp9, &OStmp9.equ ROStmp10, &OStmp10.equ ROStmp11, &OStmp11.global ROStmp0, ROStmp1, ROStmp2, ROStmp3.global ROStmp4, ROStmp5, ROStmp6, ROStmp7.global ROStmp8, ROStmp9, ROStmp10, ROStmp11;; Assigning Names to Statics/Permanent Registers.;.reg OSsta0, gr80 ; Spill Address Register.reg OSsta1, gr81 ; Fill Address Register.reg OSsta2, gr82 ; Signal Address Register.reg OSsta3, gr83 ; pcb Register.reg OSsta4, gr84 ;.reg OSsta5, gr85 ;.reg OSsta6, gr86 ;.reg OSsta7, gr87 ;.reg OSsta8, gr88 ;.reg OSsta9, gr89 ;.reg OSsta10, gr90 ;.reg OSsta11, gr91 ;.reg OSsta12, gr92 ;.reg OSsta13, gr93 ;.reg OSsta14, gr94 ;.reg OSsta15, gr95 ;;; Round 2 of Name Assignments;;; Assignment of Specific Use oriented names to statics.;.reg SpillAddrReg, gr80.reg FillAddrReg, gr81.reg SignalAddrReg, gr82.reg pcb, gr83.reg etx, gr80.reg ety, gr81.reg etz, gr82.reg etc, gr83;*.reg TimerExt, gr84.reg TimerUtil, gr85;*.reg LEDReg, gr86.reg ERRReg, gr87.reg eta, gr86.reg etb, gr87;*;* The following registers are used by switching code.reg et0, gr88.reg et1, gr89.reg et2, gr90.reg et3, gr91.reg et4, gr92.reg et5, gr93.reg et6, gr94.reg et7, gr95; The floating point trap handlers need a few static registers.reg FPStat0, gr88.reg FPStat1, gr89.reg FPStat2, gr90.reg FPStat3, gr91; The following registers are used temporarily during diagnostics..reg XLINXReg, gr92.reg VMBCReg, gr93.reg UARTReg, gr94.reg ETHERReg, gr95;*;;*.reg heapptr, gr90.reg ArgvPtr, gr91;;*;;* Preparing to export Register Names for the Linkers benefit.;.equ RSpillAddrReg, &SpillAddrReg.equ RFillAddrReg, &FillAddrReg.equ RSignalAddrReg, &SignalAddrReg.equ Rpcb, &pcb.equ Retx, &etx.equ Rety, &ety.equ Retz, &etz.equ Reta, &eta.equ Retb, &etb.equ Retc, &etc.equ RTimerExt, &TimerExt.equ RTimerUtil, &TimerUtil.equ RLEDReg, &LEDReg.equ RERRReg, &ERRReg.equ Ret0, &et0.equ Ret1, &et1.equ Ret2, &et2.equ Ret3, &et3.equ RFPStat0, &FPStat0.equ RFPStat1, &FPStat1.equ RFPStat2, &FPStat2.equ RFPStat3, &FPStat3.equ Rheapptr, &heapptr.equ RHeapPtr, &heapptr.equ RArgvPtr, &ArgvPtr.equ Ret4, &et4.equ Ret5, &et5.equ Ret6, &et6.equ Ret7, &et7.equ RXLINXReg, &XLINXReg.equ RVMBCReg, &VMBCReg.equ RUARTReg, &UARTReg.equ RETHERReg, ÐERReg.global RSpillAddrReg, RFillAddrReg, RSignalAddrReg.global Rpcb, Retc.global RTimerExt, RTimerUtil, RLEDReg, RERRReg.global Ret0, Ret1, Ret2, Ret3, Ret4, Ret5, Ret6, Ret7, Reta, Retb.global Retx, Rety, Retz.global RFPStat0, RFPStat1, RFPStat2, RFPStat3.global Rheapptr, RHeapPtr, RArgvPtr.global RXLINXReg, RVMBCReg, RUARTReg, RETHERReg;;*************************************************************************;;; Rule 3:; Gr96-Gr127 Compiler & Programmer use registers.; 32 Registers for Compiler & Programmer use;; 16 Registers for Compiler Use.;;; Compiler Temporaries and Function Return Values;.reg v0, gr96 ; First word of Return Value.reg v1, gr97.reg v2, gr98.reg v3, gr99.reg v4, gr100.reg v5, gr101.reg v6, gr102.reg v7, gr103.reg v8, gr104.reg v9, gr105.reg v10, gr106.reg v11, gr107.reg v12, gr108.reg v13, gr109.reg v14, gr110.reg v15, gr111.equ Rv0, &v0.equ Rv1, &v1.equ Rv2, &v2.equ Rv3, &v3.equ Rv4, &v4.equ Rv5, &v5.equ Rv6, &v6.equ Rv7, &v7.equ Rv8, &v8.equ Rv9, &v9.equ Rv10, &v10.equ Rv11, &v11.equ Rv12, &v12.equ Rv13, &v13.equ Rv14, &v14.equ Rv15, &v15.global Rv0, Rv1, Rv2, Rv3, Rv4, Rv5, Rv6, Rv7, Rv8, Rv9.global Rv10, Rv11, Rv12, Rv13, Rv14, Rv15;; User Process Statics Registers;.reg rp0, gr112 ; Reserved for Programmer, #0.reg rp1, gr113 ; Reserved for Programmer, #1.reg rp2, gr114 ; Reserved for Programmer, #2.reg rp3, gr115 ; Reserved for Programmer, #3.equ Rrp0, &rp0.equ Rrp1, &rp1.equ Rrp2, &rp2.equ Rrp3, &rp3.global Rrp0, Rrp1, Rrp2, Rrp3;; Compiler Temporaries II;.reg tv0, gr116 ;.reg tv1, gr117 ;.reg tv2, gr118 ;.reg tv3, gr119 ;.reg tv4, gr120 ;.equ Rtv0, &tv0 ;.equ Rtv1, &tv1 ;.equ Rtv2, &tv2 ;.equ Rtv3, &tv3 ;.equ Rtv4, &tv4 ;.global Rtv0, Rtv1, Rtv2, Rtv3, Rtv4;; Special pointers and registers for handlers and stack operations.;.reg tav, gr121 ; Temp, Arg for Trap Handlers.reg tpc, gr122 ; Temp, Ret PC for Trap Handlers.reg lrp, gr123 ; Large Return Pointer.reg slp, gr124 ; Static Link Pointer.reg msp, gr125 ; Memory Stack Pointer.reg rab, gr126 ; Register Allocate Bound.reg rfb, gr127 ; Register Free Bound.equ Rtav, &tav.equ Rtpc, &tpc.equ Rlrp, &lrp.equ Rslp, &slp.equ Rmsp, &msp.equ Rrab, &rab.equ Rrfb, &rfb.global Rtav, Rtpc, Rlrp, Rslp, Rmsp, Rrab, Rrfb
Go to most recent revision | Compare with Previous | Blame | View Log