URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [i386/] [pc386/] [3c509/] [3c509.c] - Rev 389
Go to most recent revision | Compare with Previous | Blame | View Log
/********************************************************************************** * $Header: /home/marcus/revision_ctrl_test/oc_cvs/cvs/or1k/rtems/c/src/lib/libbsp/i386/pc386/3c509/3c509.c,v 1.2 2001-09-27 11:59:47 chris Exp $ * * Ported by Rosimildo da Silva. * ConnectTel,Inc. * e-mail: rdasilva@connecttel.com * * MODULE DESCRIPTION: * RTEMS driver for 3COM 3C509 Ethernet Card. * The driver has been tested on PC with a single network card. * * * This driver was based on the FreeBSD implementation( if_ep.c ) of the 3c5x9 * family and on the network framework of the RTEMS network driver. * ( WD80x3 by Eric Norum ). * See notes below: * ****************************************************************************** * Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Herb Peyerl. * 4. The name of Herb Peyerl may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ******************************************************************************* * * RTEMS driver for M68360 WD1 Ethernet * * W. Eric Norum * Saskatchewan Accelerator Laboratory * University of Saskatchewan * Saskatoon, Saskatchewan, CANADA * eric@skatter.usask.ca ******************************************************************************* * * * MODIFICATION/HISTORY: * $Log: not supported by cvs2svn $ * Revision 1.2 1999/12/13 21:21:31 joel * Warning removal patch from Philip A. Prindeville <philipp@zembu.com>. * * Revision 1.1 1999/05/14 16:23:42 joel * Added 3COM 3C509 driver from Rosimildo DaSilva <rdasilva@connecttel.com>. * * **********************************************************************************/ #include <bsp.h> #include <stdio.h> #include <stdarg.h> #include <rtems/error.h> #include <rtems/rtems_bsdnet.h> #include <sys/param.h> #include <sys/mbuf.h> #include <sys/socket.h> #include <sys/sockio.h> #include <sys/libkern.h> #include <net/if.h> #include <netinet/in.h> #include <netinet/if_ether.h> #include <irq.h> /* Local includes */ #include "3c509.h" #include "elink.h" /* #define ET_MINLEN 60 */ /* minimum message length */ /* * Number of WDs supported by this driver */ #define NWDDRIVER 1 /* * Default number of buffer descriptors set aside for this driver. * The number of transmit buffer descriptors has to be quite large * since a single frame often uses four or more buffer descriptors. */ /* #define RX_BUF_COUNT 15 #define TX_BUF_COUNT 4 #define TX_BD_PER_BUF 4 */ /* * RTEMS event used by interrupt handler to signal driver tasks. * This must not be any of the events used by the network task synchronization. */ #define INTERRUPT_EVENT RTEMS_EVENT_1 /* * RTEMS event used to start transmit daemon. * This must not be the same as INTERRUPT_EVENT. */ #define START_TRANSMIT_EVENT RTEMS_EVENT_2 /* * Receive buffer size -- Allow for a full ethernet packet including CRC */ /* #define RBUF_SIZE 1520 #if (MCLBYTES < RBUF_SIZE) # error "Driver must have MCLBYTES > RBUF_SIZE" #endif */ /* network driver name */ #define NET_DRIVER_NAME "ep" /* * Per device structure. * * XXX Note: id_conflicts should either become an array of things we're * specifically allowed to conflict with or be subsumed into some * more powerful mechanism for detecting and dealing with multiple types * of non-fatal conflict. -jkh XXX */ struct isa_device { int id_id; /* device id */ int id_unit; /* unit number */ int id_iobase; /* base i/o address */ u_int id_irq; /* interrupt request */ }; struct ep_board { int epb_addr; /* address of this board */ char epb_used; /* was this entry already used for configuring ? */ /* data from EEPROM for later use */ u_short eth_addr[3]; /* Ethernet address */ u_short prod_id; /* product ID */ u_short res_cfg; /* resource configuration */ }; /* * Ethernet software status per interface. */ struct ep_softc { struct arpcom arpcom; /* Ethernet common part */ int ep_io_addr; /* i/o bus address */ struct mbuf *top, *mcur; short cur_len; u_short ep_connectors; /* Connectors on this card. */ u_char ep_connector; /* Configured connector. */ int stat; /* some flags */ struct ep_board *epb; int unit; rtems_irq_connect_data irqInfo; rtems_id rxDaemonTid; rtems_id txDaemonTid; int acceptBroadcast; short tx_underrun; short rx_no_first; short rx_no_mbuf; short rx_bpf_disc; short rx_overrunf; short rx_overrunl; }; /* static unsigned long loopc; */ static volatile unsigned long overrun; static volatile unsigned long resend; static struct ep_softc ep_softc[ NWDDRIVER ]; static struct isa_device isa_dev[ NWDDRIVER ] = { { 0, /* device id */ 0, /* unit number */ -1, /* base i/o address ??? */ 0 /* interrupt request ??? */ } }; static u_long ep_unit; static int ep_boards; struct ep_board ep_board[ EP_MAX_BOARDS + 1]; static int ep_current_tag = EP_LAST_TAG + 1; static char *ep_conn_type[] = {"UTP", "AUI", "???", "BNC"}; #define ep_ftst(f) (sc->stat&(f)) #define ep_fset(f) (sc->stat|=(f)) #define ep_frst(f) (sc->stat&=~(f)) /* forward declarations for functions */ static int ep_attach( struct ep_softc *sc ); static int ep_isa_probe( struct isa_device *is ); static void epinit( struct ep_softc *sc ); static void epread( register struct ep_softc *sc ); static void epstart( struct ifnet *ifp ); static void epread( register struct ep_softc *sc ); static int ep_isa_attach( struct isa_device *is ); static int get_eeprom_data( int id_port, int offset ); static void ep_intr( struct ep_softc *sc ); /* external functions */ extern void Wait_X_ms( unsigned int timeToWait ); /* timer.c ??? */ /********************************************************************************** * * DESCRIPTION: Writes a buffer of data to the I/O port. The data is sent to the * port as 32 bits units( 4 bytes ). * * RETURNS: nothing. * **********************************************************************************/ static __inline void outsl( unsigned short io_addr, unsigned char *out_data, int len ) { u_long *pl = ( u_long *)out_data; while( len-- ) { outport_long( io_addr, *pl ); pl++; } } /********************************************************************************** * * DESCRIPTION: Writes a buffer of data to the I/O port. The data is sent to the * port as 16 bits units( 2 bytes ). * * RETURNS: * **********************************************************************************/ static __inline void outsw( unsigned short io_addr, unsigned char *out_data, int len ) { u_short *ps = ( u_short *)out_data; while( len-- ) { outport_word( io_addr, *ps ); ps++; } } /********************************************************************************** * * DESCRIPTION: Writes a buffer of data to the I/O port. The data is sent to the * port as 8 bits units( 1 byte ). * * RETURNS: nothing * **********************************************************************************/ static __inline void outsb( unsigned short io_addr, unsigned char *out_data, int len ) { while( len-- ) { outport_byte( io_addr, *out_data ); out_data++; } } /********************************************************************************** * * DESCRIPTION: Read a buffer of data from an I/O port. The data is read as 16 bits * units or 2 bytes. * * RETURNS: nothing. * **********************************************************************************/ static __inline void insw( unsigned short io_addr, unsigned char *in_data, int len ) { u_short *ps = ( u_short *)in_data; while( len-- ) { inport_word( io_addr, *ps ); ps++; } } /********************************************************************************** * * DESCRIPTION: Read a buffer of data from an I/O port. The data is read as 32 bits * units or 4 bytes. * * RETURNS: nothing. * **********************************************************************************/ static __inline void insl( unsigned short io_addr, unsigned char *in_data, int len ) { u_long *pl = ( u_long *)in_data; while( len-- ) { inport_long( io_addr, *pl ); pl++; } } /********************************************************************************** * * DESCRIPTION: Read a buffer of data from an I/O port. The data is read as 8 bits * units or 1 bytes. * * RETURNS: nothing. * **********************************************************************************/ static __inline void insb( unsigned short io_addr, unsigned char *in_data, int len ) { while( len-- ) { inport_byte( io_addr, *in_data++ ); } } /********************************************************************************** * * DESCRIPTION: Writes a word to the I/O port. * * RETURNS: nothing. * **********************************************************************************/ /* * Routine to output a word as defined in FreeBSD. */ static __inline void outw( unsigned short io_addr, unsigned short out_data ) { outport_word( io_addr, out_data ); } /********************************************************************************** * * DESCRIPTION: Routine to read a word as defined in FreeBSD. * * RETURNS: nothing * **********************************************************************************/ static __inline unsigned short inw( unsigned short io_addr ) { unsigned short in_data; inport_word( io_addr, in_data ); return in_data; } /********************************************************************************** * * DESCRIPTION: Routine to output a word as defined in FreeBSD. * * RETURNS: nothing. * **********************************************************************************/ void __inline outb( unsigned short io_addr, unsigned char out_data ) { outport_byte( io_addr, out_data ); } /********************************************************************************** * * DESCRIPTION: Routine to read a word as defined in FreeBSD. * * RETURNS: byte read. * **********************************************************************************/ static __inline unsigned char inb( unsigned short io_addr ) { unsigned char in_data; inport_byte( io_addr, in_data ); return in_data; } /********************************************************************************** * * DESCRIPTION: * We get eeprom data from the id_port given an offset into the eeprom. * Basically; after the ID_sequence is sent to all of the cards; they enter * the ID_CMD state where they will accept command requests. 0x80-0xbf loads * the eeprom data. We then read the port 16 times and with every read; the * cards check for contention (ie: if one card writes a 0 bit and another * writes a 1 bit then the host sees a 0. At the end of the cycle; each card * compares the data on the bus; if there is a difference then that card goes * into ID_WAIT state again). In the meantime; one bit of data is returned in * the AX register which is conveniently returned to us by inb(). Hence; we * read 16 times getting one bit of data with each read. * * RETURNS: 16 bit word from the EEPROM * **********************************************************************************/ static int get_eeprom_data( int id_port, int offset ) { int i, data = 0; outb(id_port, 0x80 + offset); Wait_X_ms( 1 ); for (i = 0; i < 16; i++) data = (data << 1) | (inw(id_port) & 1); return( data ); } /********************************************************************************** * * DESCRIPTION: Waits until the EEPROM of the card is ready to be accessed. * * RETURNS: 0 - not ready; 1 - ok * **********************************************************************************/ static int eeprom_rdy( struct ep_softc *sc ) { int i; for (i = 0; is_eeprom_busy(BASE) && i < MAX_EEPROMBUSY; i++) continue; if (i >= MAX_EEPROMBUSY) { printf("ep%d: eeprom failed to come ready.\n", sc->unit); return (0); } return (1); } /********************************************************************************** * * DESCRIPTION: * get_e: gets a 16 bits word from the EEPROM. * We must have set the window before call this routine. * * RETURNS: data from EEPROM * **********************************************************************************/ u_short get_e( struct ep_softc *sc, int offset ) { if( !eeprom_rdy(sc) ) return (0xffff); outw(BASE + EP_W0_EEPROM_COMMAND, EEPROM_CMD_RD | offset ); if( !eeprom_rdy(sc) ) return( 0xffff ); return( inw( BASE + EP_W0_EEPROM_DATA ) ); } /********************************************************************************** * * DESCRIPTION: * Driver interrupt handler. This routine is called by the RTEMS kernel when this * interrupt is raised. * * RETURNS: nothing. * **********************************************************************************/ static rtems_isr ap_interrupt_handler( rtems_vector_number v ) { struct ep_softc *sc = (struct ep_softc *)&ep_softc[ 0 ]; /* de-activate any pending interrrupt, and sent and event to interrupt task * to process all events required by this interrupt. */ outw( BASE + EP_COMMAND, SET_INTR_MASK ); /* disable all Ints */ rtems_event_send( sc->rxDaemonTid, INTERRUPT_EVENT ); } /********************************************************************************** * * DESCRIPTION: * * RETURNS: * **********************************************************************************/ static void nopOn(const rtems_irq_connect_data* notUsed) { /* does nothing */ } /********************************************************************************** * * DESCRIPTION: * * RETURNS: * **********************************************************************************/ static int _3c509_IsOn(const rtems_irq_connect_data* irq) { return BSP_irq_enabled_at_i8259s (irq->name); } /********************************************************************************** * * DESCRIPTION: * Initializes the ethernet hardware. * * RETURNS: nothing. * **********************************************************************************/ static void _3c509_initialize_hardware (struct ep_softc *sc) { rtems_status_code st; epinit( sc ); /* * Set up interrupts */ sc->irqInfo.hdl = ( rtems_irq_hdl )ap_interrupt_handler; sc->irqInfo.on = nopOn; sc->irqInfo.off = nopOn; sc->irqInfo.isOn = _3c509_IsOn; printf ("3c509: IRQ with Kernel: %d\n", sc->irqInfo.name ); st = BSP_install_rtems_irq_handler( &sc->irqInfo ); if( !st ) { rtems_panic ("Can't attach WD interrupt handler for irq %d\n", sc->irqInfo.name ); } } /********************************************************************************** * * DESCRIPTION: Driver interrupt daemon. * * RETURNS: nothing. * **********************************************************************************/ static void _3c509_rxDaemon (void *arg) { struct ep_softc *dp = (struct ep_softc *)&ep_softc[ 0 ]; rtems_event_set events; printf ("3C509: RX Daemon is starting.\n"); for( ;; ) { /* printk( "R-" ); */ rtems_bsdnet_event_receive( INTERRUPT_EVENT, RTEMS_WAIT | RTEMS_EVENT_ANY, RTEMS_NO_TIMEOUT, &events ); /* printk( "R+" ); */ ep_intr( dp ); epstart( &dp->arpcom.ac_if ); } printf ("3C509: RX Daemon is finishing.\n"); } /********************************************************************************** * * DESCRIPTION: Driver transmit daemon * * RETURNS: * **********************************************************************************/ static void _3c509_txDaemon (void *arg) { struct ep_softc *sc = (struct ep_softc *)&ep_softc[0]; struct ifnet *ifp = &sc->arpcom.ac_if; rtems_event_set events; printf ("3C509: TX Daemon is starting.\n"); for( ;; ) { /* * Wait for packet */ /* printk( "T-\n" ); */ rtems_bsdnet_event_receive( START_TRANSMIT_EVENT, RTEMS_EVENT_ANY | RTEMS_WAIT, RTEMS_NO_TIMEOUT, &events ); /* printk( "T+\n" ); */ epstart( ifp ); while( ifp->if_flags & IFF_OACTIVE ) epstart( ifp ); } printf ("3C509: TX Daemon is finishing.\n"); } /********************************************************************************** * * DESCRIPTION: Activates the trabsmitter task... * * RETURNS: nothing. * **********************************************************************************/ static void _3c509_start (struct ifnet *ifp) { struct ep_softc *sc = ifp->if_softc; /* printk ("S"); */ ifp->if_flags |= IFF_OACTIVE; rtems_event_send( sc->txDaemonTid, START_TRANSMIT_EVENT ); } /********************************************************************************** * * DESCRIPTION: Initialize and start the device * * RETURNS: * **********************************************************************************/ static void _3c509_init (void *arg) { struct ep_softc *sc = arg; struct ifnet *ifp = &sc->arpcom.ac_if; printf ("3C509: Initialization called.\n"); if (sc->txDaemonTid == 0) { /* * Set up WD hardware */ _3c509_initialize_hardware (sc); printf ("3C509: starting network driver tasks..\n"); /* * Start driver tasks */ sc->txDaemonTid = rtems_bsdnet_newproc ("APtx", 4096, _3c509_txDaemon, sc); sc->rxDaemonTid = rtems_bsdnet_newproc ("APrx", 4096, _3c509_rxDaemon, sc); } /* * Tell the world that we're running. */ ifp->if_flags |= IFF_RUNNING; } /********************************************************************************** * * DESCRIPTION: Stop the device * * RETURNS: * **********************************************************************************/ static void _3c509_stop (struct ep_softc *sc) { struct ifnet *ifp = &sc->arpcom.ac_if; ifp->if_flags &= ~IFF_RUNNING; printf ("3C509: stop() called.\n"); /* * Stop the transmitter */ outw(BASE + EP_COMMAND, RX_DISABLE); outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK); while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS); outw(BASE + EP_COMMAND, TX_DISABLE); outw(BASE + EP_COMMAND, STOP_TRANSCEIVER); outw(BASE + EP_COMMAND, RX_RESET); outw(BASE + EP_COMMAND, TX_RESET); while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS); outw(BASE + EP_COMMAND, C_INTR_LATCH); outw(BASE + EP_COMMAND, SET_RD_0_MASK); outw(BASE + EP_COMMAND, SET_INTR_MASK); outw(BASE + EP_COMMAND, SET_RX_FILTER); } /********************************************************************************** * * DESCRIPTION: Show interface statistics * * RETURNS: nothing. * **********************************************************************************/ static void _3c509_stats (struct ep_softc *sc) { struct ifnet *ifp = &sc->arpcom.ac_if; printf ("3C509: stats() called.\n"); printf("\tStat: %x\n", sc->stat); printf("\tIpackets=%ld, Opackets=%ld\n", ifp->if_ipackets, ifp->if_opackets); printf("\tNOF=%d, NOMB=%d, BPFD=%d, RXOF=%d, RXOL=%d, TXU=%d\n", sc->rx_no_first, sc->rx_no_mbuf, sc->rx_bpf_disc, sc->rx_overrunf, sc->rx_overrunl, sc->tx_underrun ); } /********************************************************************************** * * DESCRIPTION: Driver ioctl handler * * RETURNS: * **********************************************************************************/ static int _3c509_ioctl (struct ifnet *ifp, int command, caddr_t data) { struct ep_softc *sc = ifp->if_softc; int error = 0; printf ("3C509: ioctl() called.\n"); switch (command) { case SIOCGIFADDR: case SIOCSIFADDR: ether_ioctl (ifp, command, data); break; case SIOCSIFFLAGS: switch (ifp->if_flags & (IFF_UP | IFF_RUNNING)) { case IFF_RUNNING: _3c509_stop (sc); break; case IFF_UP: _3c509_init (sc); break; case IFF_UP | IFF_RUNNING: _3c509_stop (sc); _3c509_init (sc); break; default: break; } break; case SIO_RTEMS_SHOW_STATS: _3c509_stats( sc ); break; /* * FIXME: All sorts of multicast commands need to be added here! */ default: error = EINVAL; break; } return error; } /********************************************************************************** * * DESCRIPTION: * Attaches this network driver to the system. This function is called by the network * interface during the initialization of the system. * * RETURNS: - 1 - success; 0 - fail to initialize * **********************************************************************************/ int rtems_3c509_driver_attach (struct rtems_bsdnet_ifconfig *config ) { struct ep_softc *sc; struct ifnet *ifp; int mtu; int i; printf ("3C509: attach() called.\n"); /* * init some variables */ overrun = 0; resend = 0; ep_unit = 0; ep_boards = 0; /* * Find a free driver */ for (i = 0 ; i < NWDDRIVER ; i++) { sc = &ep_softc[i]; ifp = &sc->arpcom.ac_if; if (ifp->if_softc == NULL) break; } if (i >= NWDDRIVER) { printf ("Too many 3C509 drivers.\n"); return 0; } /* * Process options */ if( config->hardware_address ) { memcpy (sc->arpcom.ac_enaddr, config->hardware_address, ETHER_ADDR_LEN); } else { /* set it to something ... */ memset (sc->arpcom.ac_enaddr, 0x08,ETHER_ADDR_LEN); } if (config->mtu) mtu = config->mtu; else mtu = ETHERMTU; if (config->irno) sc->irqInfo.name = config->irno; else sc->irqInfo.name = 10; if (config->port) sc->ep_io_addr = config->port; else sc->ep_io_addr = 0x300; sc->acceptBroadcast = !config->ignore_broadcast; printf ("3C509: isa_probe() looking for a card...\n"); if( !ep_isa_probe( &isa_dev[ 0 ] ) ) { printf ("3C509: isa_probe() fail to find a board.\n"); return 0; } /* A board has been found, so proceed with the installation of the driver */ ep_isa_attach( &isa_dev[ 0 ] ); /* * Set up network interface values */ ifp->if_softc = sc; ifp->if_unit = i; ifp->if_name = NET_DRIVER_NAME; ifp->if_mtu = mtu; ifp->if_init = _3c509_init; ifp->if_ioctl = _3c509_ioctl; ifp->if_start = _3c509_start; ifp->if_output = ether_output; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; if( ifp->if_snd.ifq_maxlen == 0 ) { ifp->if_snd.ifq_maxlen = ifqmaxlen; } /* * Attach the interface */ if_attach (ifp); ether_ifattach (ifp); printf ("3C509: attach() is complete.\n"); return 1; } /********************************************************************************** * * DESCRIPTION: * This function looks for a 3COM card 3c5x9 in an isa bus. If a board is found, it * returns a structure describing the caracteristics of the card. It returns zero when * card can not be found. * * RETURNS: 0 - fail - could not find a card... * <> description of the card. * **********************************************************************************/ static struct ep_board *ep_look_for_board_at( struct isa_device *is ) { int data, i, j, id_port = ELINK_ID_PORT; int count = 0; if(ep_current_tag == (EP_LAST_TAG + 1) ) { /* Come here just one time */ ep_current_tag--; /* Look for the ISA boards. Init and leave them actived */ outb(id_port, 0); outb(id_port, 0); elink_idseq(0xCF); elink_reset(); Wait_X_ms( 10 ); /* RPS: assuming delay in miliseconds */ for (i = 0; i < EP_MAX_BOARDS; i++) { outb(id_port, 0); outb(id_port, 0); elink_idseq(0xCF); data = get_eeprom_data(id_port, EEPROM_MFG_ID); if (data != MFG_ID) break; /* resolve contention using the Ethernet address */ for (j = 0; j < 3; j++) get_eeprom_data(id_port, j); /* and save this address for later use */ for (j = 0; j < 3; j++) ep_board[ep_boards].eth_addr[j] = get_eeprom_data(id_port, j); ep_board[ep_boards].res_cfg = get_eeprom_data(id_port, EEPROM_RESOURCE_CFG); ep_board[ep_boards].prod_id = get_eeprom_data(id_port, EEPROM_PROD_ID); ep_board[ep_boards].epb_used = 0; #ifdef PC98 ep_board[ep_boards].epb_addr = (get_eeprom_data(id_port, EEPROM_ADDR_CFG) & 0x1f) * 0x100 + 0x40d0; #else ep_board[ep_boards].epb_addr = (get_eeprom_data(id_port, EEPROM_ADDR_CFG) & 0x1f) * 0x10 + 0x200; if (ep_board[ep_boards].epb_addr > 0x3E0) /* Board in EISA configuration mode */ continue; #endif /* PC98 */ outb(id_port, ep_current_tag); /* tags board */ outb(id_port, ACTIVATE_ADAPTER_TO_CONFIG); ep_boards++; count++; ep_current_tag--; } ep_board[ep_boards].epb_addr = 0; if( count ) { printf("%d 3C5x9 board(s) on ISA found at", count); for (j = 0; ep_board[j].epb_addr; j++) if( ep_board[j].epb_addr <= 0x3E0 ) printf(" 0x%x", ep_board[j].epb_addr ); printf("\n"); } } /* we have two cases: * * 1. Device was configured with 'port ?' * In this case we search for the first unused card in list * * 2. Device was configured with 'port xxx' * In this case we search for the unused card with that address * */ if (IS_BASE == -1) { /* port? */ for (i = 0; ep_board[i].epb_addr && ep_board[i].epb_used; i++) ; if (ep_board[i].epb_addr == 0) return 0; IS_BASE = ep_board[i].epb_addr; ep_board[i].epb_used = 1; return &ep_board[ i ]; } else { for (i = 0; ep_board[i].epb_addr && ep_board[i].epb_addr != IS_BASE; i++ ) ; if (ep_board[i].epb_used || ep_board[i].epb_addr != IS_BASE) return 0; if (inw(IS_BASE + EP_W0_EEPROM_COMMAND) & EEPROM_TST_MODE) { printf("ep%d: 3c5x9 at 0x%x in PnP mode. Disable PnP mode!\n", is->id_unit, IS_BASE ); } ep_board[i].epb_used = 1; return &ep_board[i]; } } /********************************************************************************** * * DESCRIPTION: * This routine checks if there card installed on the machine. * * RETURNS: 0 - no card founded. * 16 - size of the IO range for the card. * **********************************************************************************/ static int ep_isa_probe( struct isa_device *is ) { struct ep_softc *sc; struct ep_board *epb; u_short k; /* try to find a 3COM 3c5x9 .... */ if( (epb = ep_look_for_board_at(is)) == 0 ) return (0); sc = &ep_softc[ 0 ]; sc->ep_io_addr = epb->epb_addr; sc->epb = epb; /* * The iobase was found and MFG_ID was 0x6d50. PROD_ID should be * 0x9[0-f]50 (IBM-PC) * 0x9[0-f]5[0-f] (PC-98) */ GO_WINDOW(0); k = sc->epb->prod_id; #ifdef PC98 if ((k & 0xf0f0) != (PROD_ID & 0xf0f0)) { #else if ((k & 0xf0ff) != (PROD_ID & 0xf0ff)) { #endif printf("ep_isa_probe: ignoring model %04x\n", k ); /* ep_unit--; */ return (0); } k = sc->epb->res_cfg; k >>= 12; /* Now we have two cases again: * * 1. Device was configured with 'irq?' * In this case we use irq read from the board * * 2. Device was configured with 'irq xxx' * In this case we set up the board to use specified interrupt * */ if (is->id_irq == 0) { /* irq? */ is->id_irq = ( k == 2 ) ? 9 : k; } sc->stat = 0; /* 16 bit access */ /* By now, the adapter is already activated */ return (EP_IOSIZE); /* 16 bytes of I/O space used. */ } /********************************************************************************** * * DESCRIPTION: * This routine attaches this network driver and the network interface routines. * * RETURNS: 0 - failed to attach * 1 - success * **********************************************************************************/ static int ep_isa_attach( struct isa_device *is ) { struct ep_softc *sc = &ep_softc[ 0 ]; u_short config; int irq; sc->ep_connectors = 0; config = inw( IS_BASE + EP_W0_CONFIG_CTRL ); if (config & IS_AUI) { sc->ep_connectors |= AUI; } if (config & IS_BNC) { sc->ep_connectors |= BNC; } if (config & IS_UTP) { sc->ep_connectors |= UTP; } if( !(sc->ep_connectors & 7) ) printf( "no connectors!" ); sc->ep_connector = inw(BASE + EP_W0_ADDRESS_CFG) >> ACF_CONNECTOR_BITS; /* * Write IRQ value to board */ irq = is->id_irq; /* update the interrupt line number to registered with kernel */ sc->irqInfo.name = irq; GO_WINDOW( 0 ); SET_IRQ( BASE, irq ); printf( "3C509: I/O=0x%x, IRQ=%d, CONNECTOR=%s, ", sc->ep_io_addr, sc->irqInfo.name,ep_conn_type[ sc->ep_connector ] ); ep_attach( sc ); return 1; } /********************************************************************************** * * DESCRIPTION: Completes the initialization/attachement of the driver. * * RETURNS: 0 - ok. * **********************************************************************************/ static int ep_attach( struct ep_softc *sc ) { u_short *p; int i; /* * Setup the station address */ p = (u_short *) &sc->arpcom.ac_enaddr; GO_WINDOW(2); printf("ADDRESS=" ); for (i = 0; i < 3; i++) { p[i] = htons( sc->epb->eth_addr[i] ); outw( BASE + EP_W2_ADDR_0 + (i * 2), ntohs( p[i] ) ); printf("%04x ", (u_short)ntohs( p[i] ) ); } printf("\n" ); sc->rx_no_first = sc->rx_no_mbuf = sc->rx_bpf_disc = sc->rx_overrunf = sc->rx_overrunl = sc->tx_underrun = 0; ep_fset( F_RX_FIRST ); sc->top = sc->mcur = 0; return 0; } /********************************************************************************** * * DESCRIPTION: * Initializes the card. * The order in here seems important. Otherwise we may not receive interrupts. ?! * * RETURNS: nothing. * **********************************************************************************/ static void epinit( struct ep_softc *sc ) { register struct ifnet *ifp = &sc->arpcom.ac_if; int i, j; while( inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS ) ; GO_WINDOW(0); outw(BASE + EP_COMMAND, STOP_TRANSCEIVER); GO_WINDOW(4); outw(BASE + EP_W4_MEDIA_TYPE, DISABLE_UTP); GO_WINDOW(0); /* Disable the card */ outw(BASE + EP_W0_CONFIG_CTRL, 0); /* Enable the card */ outw(BASE + EP_W0_CONFIG_CTRL, ENABLE_DRQ_IRQ); GO_WINDOW(2); /* Reload the ether_addr. */ for (i = 0; i < 6; i++) outb(BASE + EP_W2_ADDR_0 + i, sc->arpcom.ac_enaddr[i]); outw(BASE + EP_COMMAND, RX_RESET); outw(BASE + EP_COMMAND, TX_RESET); while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS); /* Window 1 is operating window */ GO_WINDOW(1); for (i = 0; i < 31; i++) inb(BASE + EP_W1_TX_STATUS); /* get rid of stray intr's */ outw(BASE + EP_COMMAND, ACK_INTR | 0xff); outw(BASE + EP_COMMAND, SET_RD_0_MASK | S_5_INTS); outw(BASE + EP_COMMAND, SET_INTR_MASK | S_5_INTS); if (ifp->if_flags & IFF_PROMISC) outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | FIL_GROUP | FIL_BRDCST | FIL_ALL); else outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | FIL_GROUP | FIL_BRDCST); /* * S.B. * * Now behavior was slightly changed: * * if any of flags link[0-2] is used and its connector is * physically present the following connectors are used: * * link0 - AUI * highest precedence * link1 - BNC * link2 - UTP * lowest precedence * * If none of them is specified then * connector specified in the EEPROM is used * (if present on card or AUI if not). * */ /* Set the xcvr. */ if (ifp->if_flags & IFF_LINK0 && sc->ep_connectors & AUI) { i = ACF_CONNECTOR_AUI; } else if (ifp->if_flags & IFF_LINK1 && sc->ep_connectors & BNC) { i = ACF_CONNECTOR_BNC; } else if (ifp->if_flags & IFF_LINK2 && sc->ep_connectors & UTP) { i = ACF_CONNECTOR_UTP; } else { i = sc->ep_connector; } GO_WINDOW(0); j = inw(BASE + EP_W0_ADDRESS_CFG) & 0x3fff; outw(BASE + EP_W0_ADDRESS_CFG, j | (i << ACF_CONNECTOR_BITS)); switch(i) { case ACF_CONNECTOR_UTP: if (sc->ep_connectors & UTP) { GO_WINDOW(4); outw(BASE + EP_W4_MEDIA_TYPE, ENABLE_UTP); } break; case ACF_CONNECTOR_BNC: if (sc->ep_connectors & BNC) { outw(BASE + EP_COMMAND, START_TRANSCEIVER); Wait_X_ms( 1 ); } break; case ACF_CONNECTOR_AUI: /* nothing to do */ break; default: printf("ep%d: strange connector type in EEPROM: assuming AUI\n", sc->unit); break; } outw(BASE + EP_COMMAND, RX_ENABLE); outw(BASE + EP_COMMAND, TX_ENABLE); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; /* just in case */ sc->rx_no_first = sc->rx_no_mbuf = sc->rx_bpf_disc = sc->rx_overrunf = sc->rx_overrunl = sc->tx_underrun = 0; ep_fset(F_RX_FIRST); if( sc->top ) { m_freem( sc->top ); sc->top = sc->mcur = 0; } outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_INIT_EARLY_THRESH); outw(BASE + EP_COMMAND, SET_TX_START_THRESH | 16); /* * Store up a bunch of mbuf's for use later. (MAX_MBS). First we free up * any that we had in case we're being called from intr or somewhere * else. */ GO_WINDOW(1); } static const char padmap[] = {0, 3, 2, 1}; /********************************************************************************** * * DESCRIPTION: Routine to transmit frames to the card. * * RETURNS: nothing. * **********************************************************************************/ static void epstart( struct ifnet *ifp ) { register struct ep_softc *sc = ifp->if_softc; register u_int len; register struct mbuf *m; struct mbuf *top; int pad; while( inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS ) ; startagain: /* printk( "S-" ); */ /* Sneak a peek at the next packet */ m = ifp->if_snd.ifq_head; if (m == 0) { ifp->if_flags &= ~IFF_OACTIVE; return; } for( len = 0, top = m; m; m = m->m_next ) len += m->m_len; pad = padmap[ len & 3 ]; /* * The 3c509 automatically pads short packets to minimum ethernet length, * but we drop packets that are too large. Perhaps we should truncate * them instead? */ if( len + pad > ETHER_MAX_LEN ) { /* packet is obviously too large: toss it */ ++ifp->if_oerrors; IF_DEQUEUE( &ifp->if_snd, m ); m_freem( m ); goto readcheck; } if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) { /* no room in FIFO */ outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | (len + pad + 4)); /* make sure */ if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) { ifp->if_flags |= IFF_OACTIVE; return; } } IF_DEQUEUE( &ifp->if_snd, m ); outw(BASE + EP_W1_TX_PIO_WR_1, len); outw(BASE + EP_W1_TX_PIO_WR_1, 0x0); /* Second dword meaningless */ for (top = m; m != 0; m = m->m_next) { if( ep_ftst(F_ACCESS_32_BITS ) ) { outsl( BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len / 4 ); if( m->m_len & 3 ) outsb(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t) + (m->m_len & (~3)), m->m_len & 3 ); } else { outsw( BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len / 2 ); if( m->m_len & 1 ) outb( BASE + EP_W1_TX_PIO_WR_1, *(mtod(m, caddr_t) + m->m_len - 1) ); } } while( pad-- ) { outb(BASE + EP_W1_TX_PIO_WR_1, 0); /* Padding */ } ifp->if_timer = 2; ifp->if_opackets++; m_freem(top); /* goto startagain; */ /* * Is another packet coming in? We don't want to overflow the tiny RX * fifo. */ readcheck: if( inw(BASE + EP_W1_RX_STATUS) & RX_BYTES_MASK ) { /* * we check if we have packets left, in that case we prepare to come * back later */ if( ifp->if_snd.ifq_head ) { outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | 8); } return; } goto startagain; } /********************************************************************************** * * DESCRIPTION: Routine to read frames from the card. * * RETURNS: nothing. * **********************************************************************************/ static void epread( register struct ep_softc *sc ) { struct ether_header *eh; struct mbuf *top, *mcur, *m; struct ifnet *ifp; int lenthisone; short rx_fifo2, status; register short rx_fifo; ifp = &sc->arpcom.ac_if; status = inw( BASE + EP_W1_RX_STATUS ); read_again: if (status & ERR_RX) { ++ifp->if_ierrors; if( status & ERR_RX_OVERRUN ) { /* * we can think the rx latency is actually greather than we * expect */ if( ep_ftst(F_RX_FIRST) ) sc->rx_overrunf++; else sc->rx_overrunl++; } goto out; } rx_fifo = rx_fifo2 = status & RX_BYTES_MASK; if( ep_ftst( F_RX_FIRST ) ) { MGETHDR( m, M_DONTWAIT, MT_DATA ); if( !m ) goto out; if( rx_fifo >= MINCLSIZE ) MCLGET( m, M_DONTWAIT ); sc->top = sc->mcur = top = m; #define EROUND ((sizeof(struct ether_header) + 3) & ~3) #define EOFF (EROUND - sizeof(struct ether_header)) top->m_data += EOFF; /* Read what should be the header. */ insw(BASE + EP_W1_RX_PIO_RD_1, mtod(top, caddr_t), sizeof(struct ether_header) / 2); top->m_len = sizeof(struct ether_header); rx_fifo -= sizeof(struct ether_header); sc->cur_len = rx_fifo2; } else { /* come here if we didn't have a complete packet last time */ top = sc->top; m = sc->mcur; sc->cur_len += rx_fifo2; } /* Reads what is left in the RX FIFO */ while (rx_fifo > 0) { lenthisone = min( rx_fifo, M_TRAILINGSPACE(m) ); if( lenthisone == 0 ) { /* no room in this one */ mcur = m; MGET(m, M_WAIT, MT_DATA); if (!m) goto out; if (rx_fifo >= MINCLSIZE) MCLGET(m, M_WAIT); m->m_len = 0; mcur->m_next = m; lenthisone = min(rx_fifo, M_TRAILINGSPACE(m)); } if( ep_ftst( F_ACCESS_32_BITS ) ) { /* default for EISA configured cards*/ insl( BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len, lenthisone / 4); m->m_len += (lenthisone & ~3); if (lenthisone & 3) insb(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len, lenthisone & 3); m->m_len += (lenthisone & 3); } else { insw(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len, lenthisone / 2); m->m_len += lenthisone; if( lenthisone & 1 ) *(mtod(m, caddr_t) + m->m_len - 1) = inb(BASE + EP_W1_RX_PIO_RD_1); } rx_fifo -= lenthisone; } if( status & ERR_RX_INCOMPLETE) { /* we haven't received the complete packet */ sc->mcur = m; sc->rx_no_first++; /* to know how often we come here */ ep_frst( F_RX_FIRST ); if( !((status = inw(BASE + EP_W1_RX_STATUS)) & ERR_RX_INCOMPLETE) ) { /* we see if by now, the packet has completly arrived */ goto read_again; } outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_NEXT_EARLY_THRESH); return; } outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK); ++ifp->if_ipackets; ep_fset(F_RX_FIRST); top->m_pkthdr.rcvif = &sc->arpcom.ac_if; top->m_pkthdr.len = sc->cur_len; eh = mtod(top, struct ether_header *); m_adj(top, sizeof(struct ether_header)); ether_input(ifp, eh, top); sc->top = 0; while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS) ; outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_INIT_EARLY_THRESH); return; out: outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK); if (sc->top) { m_freem(sc->top); sc->top = 0; sc->rx_no_mbuf++; } ep_fset(F_RX_FIRST); while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS) ; outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_INIT_EARLY_THRESH); } /********************************************************************************** * * DESCRIPTION: * This routine handles interrupts. It is called from the "RX" task whenever * the ISR post an event to the task. * This is basically the "isr" from the FreeBSD driver. * * RETURNS: nothing. * **********************************************************************************/ static void ep_intr( struct ep_softc *sc ) { register int status; struct ifnet *ifp; ifp = &sc->arpcom.ac_if; rescan: /* printk( "I-" ); */ while( ( status = inw(BASE + EP_STATUS)) & S_5_INTS ) { /* first acknowledge all interrupt sources */ outw( BASE + EP_COMMAND, ACK_INTR | ( status & S_MASK ) ); if( status & ( S_RX_COMPLETE | S_RX_EARLY ) ) { epread( sc ); continue; } if (status & S_TX_AVAIL) { /* we need ACK */ ifp->if_timer = 0; ifp->if_flags &= ~IFF_OACTIVE; GO_WINDOW(1); inw(BASE + EP_W1_FREE_TX); epstart(ifp); } if (status & S_CARD_FAILURE) { ifp->if_timer = 0; printf("\nep%d:\n\tStatus: %x\n", sc->unit, status); GO_WINDOW(4); printf("\tFIFO Diagnostic: %x\n", inw(BASE + EP_W4_FIFO_DIAG)); printf("\tStat: %x\n", sc->stat); printf("\tIpackets=%ld, Opackets=%ld\n", ifp->if_ipackets, ifp->if_opackets); printf("\tNOF=%d, NOMB=%d, BPFD=%d, RXOF=%d, RXOL=%d, TXU=%d\n", sc->rx_no_first, sc->rx_no_mbuf, sc->rx_bpf_disc, sc->rx_overrunf, sc->rx_overrunl, sc->tx_underrun); printf("ep%d: Status: %x (input buffer overflow)\n", sc->unit, status); ++ifp->if_ierrors; epinit(sc); return; } if (status & S_TX_COMPLETE) { ifp->if_timer = 0; /* we need ACK. we do it at the end */ /* * We need to read TX_STATUS until we get a 0 status in order to * turn off the interrupt flag. */ while ((status = inb(BASE + EP_W1_TX_STATUS)) & TXS_COMPLETE) { if (status & TXS_SUCCES_INTR_REQ) ; else if( status & (TXS_UNDERRUN | TXS_JABBER | TXS_MAX_COLLISION ) ) { outw(BASE + EP_COMMAND, TX_RESET); if (status & TXS_UNDERRUN) { sc->tx_underrun++; } else { if( status & TXS_JABBER ) ; else /* TXS_MAX_COLLISION - we shouldn't get here */ ++ifp->if_collisions; } ++ifp->if_oerrors; outw(BASE + EP_COMMAND, TX_ENABLE); /* * To have a tx_avail_int but giving the chance to the * Reception */ if( ifp->if_snd.ifq_head ) { outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | 8); } } outb( BASE + EP_W1_TX_STATUS, 0x0 ); /* pops up the next status */ } /* while */ ifp->if_flags &= ~IFF_OACTIVE; GO_WINDOW(1); inw(BASE + EP_W1_FREE_TX); epstart( ifp ); } /* end TX_COMPLETE */ } outw(BASE + EP_COMMAND, C_INTR_LATCH); /* ACK int Latch */ if( (status = inw(BASE + EP_STATUS) ) & S_5_INTS ) goto rescan; /* re-enable Ints */ outw( BASE + EP_COMMAND, SET_INTR_MASK | S_5_INTS ); /* printk( "I+" ); */ }
Go to most recent revision | Compare with Previous | Blame | View Log