URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [i386/] [pc386/] [clock/] [ckinit.c] - Rev 30
Go to most recent revision | Compare with Previous | Blame | View Log
/*-------------------------------------------------------------------------+ | ckinit.c v1.1 - PC386 BSP - 1997/08/07 +--------------------------------------------------------------------------+ | This file contains the PC386 clock package. +--------------------------------------------------------------------------+ | (C) Copyright 1997 - | - NavIST Group - Real-Time Distributed Systems and Industrial Automation | | http://pandora.ist.utl.pt | | Instituto Superior Tecnico * Lisboa * PORTUGAL +--------------------------------------------------------------------------+ | Disclaimer: | | This file is provided "AS IS" without warranty of any kind, either | expressed or implied. +--------------------------------------------------------------------------+ | This code is based on: | ckinit.c,v 1.4 1995/12/19 20:07:13 joel Exp - go32 BSP | With the following copyright notice: | ************************************************************************** | * COPYRIGHT (c) 1989-1999. | * On-Line Applications Research Corporation (OAR). | * | * The license and distribution terms for this file may be | * found in found in the file LICENSE in this distribution or at | * http://www.OARcorp.com/rtems/license.html. | ************************************************************************** | | $Id: ckinit.c,v 1.2 2001-09-27 11:59:47 chris Exp $ +--------------------------------------------------------------------------*/ #include <stdlib.h> #include <bsp.h> #include <irq.h> #include <rtems/libio.h> /*-------------------------------------------------------------------------+ | Macros +--------------------------------------------------------------------------*/ #if 0 /* This was dropped in the last revision. Its a nice thing to know. */ #define TICKS_PER_SECOND() \ (1000000 / (Clock_isrs_per_tick * microseconds_per_isr)) #endif /* 0 */ /*-------------------------------------------------------------------------+ | Global Variables +--------------------------------------------------------------------------*/ volatile rtems_unsigned32 Clock_driver_ticks; /* Tick (interrupt) counter. */ rtems_unsigned32 Clock_isrs_per_tick; /* ISRs per tick. */ rtems_unsigned32 Clock_isrs; /* ISRs until next tick. */ /* The following variables are set by the clock driver during its init */ rtems_device_major_number rtems_clock_major = ~0; rtems_device_minor_number rtems_clock_minor; /*-------------------------------------------------------------------------+ | Function: clockIsr | Description: Interrupt Service Routine for clock (0h) interruption. | Global Variables: Clock_driver_ticks, Clock_isrs. | Arguments: vector - standard RTEMS argument - see documentation. | Returns: standard return value - see documentation. +--------------------------------------------------------------------------*/ static void clockIsr() { /*-------------------------------------------------------------------------+ | PLEASE NOTE: The following is directly transcribed from the go32 BSP for | those who wish to use it with PENTIUM based machine. It needs | to be correctly integrated with the rest of the code!!! +--------------------------------------------------------------------------*/ #if 0 && defined(pentium) /* more accurate clock for PENTIUMs (not supported) */ { extern long long Last_RDTSC; __asm __volatile(".byte 0x0F, 0x31" : "=A" (Last_RDTSC)); } #endif /* 0 && pentium */ Clock_driver_ticks++; if ( Clock_isrs == 1 ) { rtems_clock_tick(); Clock_isrs = Clock_isrs_per_tick; } else Clock_isrs--; } /* clockIsr */ /*-------------------------------------------------------------------------+ | Function: Clock_exit | Description: Clock cleanup routine at RTEMS exit. NOTE: This routine is | not really necessary, since there will be a reset at exit. | Global Variables: None. | Arguments: None. | Returns: Nothing. +--------------------------------------------------------------------------*/ void clockOff(const rtems_irq_connect_data* unused) { /* reset timer mode to standard (BIOS) value */ outport_byte(TIMER_MODE, TIMER_SEL0 | TIMER_16BIT | TIMER_RATEGEN); outport_byte(TIMER_CNTR0, 0); outport_byte(TIMER_CNTR0, 0); } /* Clock_exit */ /*-------------------------------------------------------------------------+ | Function: Install_clock | Description: Initialize and install clock interrupt handler. | Global Variables: None. | Arguments: None. | Returns: Nothing. +--------------------------------------------------------------------------*/ static void clockOn(const rtems_irq_connect_data* unused) { rtems_unsigned32 microseconds_per_isr; #if 0 /* Initialize clock from on-board real time clock. This breaks the */ /* test code which assumes which assumes the application will do it. */ { rtems_time_of_day now; /* External Prototypes */ extern void init_rtc(void); /* defined in 'rtc.c' */ extern long rtc_read(rtems_time_of_day *); /* defined in 'rtc.c' */ init_rtc(); if (rtc_read(&now) >= 0) clock_set(&now); } #endif /* 0 */ /* Start by assuming hardware counter is large enough, then scale it until it actually fits. */ Clock_driver_ticks = 0; Clock_isrs_per_tick = 1; if (BSP_Configuration.microseconds_per_tick == 0) microseconds_per_isr = 10000; /* default 10 ms */ else microseconds_per_isr = BSP_Configuration.microseconds_per_tick; while (US_TO_TICK(microseconds_per_isr) > 65535) { Clock_isrs_per_tick *= 10; microseconds_per_isr /= 10; } Clock_isrs = Clock_isrs_per_tick; /* Initialize Clock_isrs */ { /* 105/88 approximates TIMER_TICK * 1e-6 */ rtems_unsigned32 count = US_TO_TICK(microseconds_per_isr); outport_byte(TIMER_MODE, TIMER_SEL0|TIMER_16BIT|TIMER_RATEGEN); outport_byte(TIMER_CNTR0, count >> 0 & 0xff); outport_byte(TIMER_CNTR0, count >> 8 & 0xff); } } int clockIsOn(const rtems_irq_connect_data* unused) { return ((i8259s_cache & 0x1) == 0); } static rtems_irq_connect_data clockIrqData = {BSP_PERIODIC_TIMER, clockIsr, clockOn, clockOff, clockIsOn}; /*-------------------------------------------------------------------------+ | Clock device driver INITIALIZE entry point. +--------------------------------------------------------------------------+ | Initilizes the clock driver. +--------------------------------------------------------------------------*/ rtems_device_driver Clock_initialize(rtems_device_major_number major, rtems_device_minor_number minor, void *pargp) { if (!BSP_install_rtems_irq_handler (&clockIrqData)) { printk("Unable to initialize system clock\n"); rtems_fatal_error_occurred(1); } /* make major/minor avail to others such as shared memory driver */ rtems_clock_major = major; rtems_clock_minor = minor; return RTEMS_SUCCESSFUL; } /* Clock_initialize */ /*-------------------------------------------------------------------------+ | Console device driver CONTROL entry point +--------------------------------------------------------------------------*/ rtems_device_driver Clock_control(rtems_device_major_number major, rtems_device_minor_number minor, void *pargp) { if (pargp != NULL) { rtems_libio_ioctl_args_t *args = pargp; /*-------------------------------------------------------------------------+ | This is hokey, but until we get a defined interface to do this, it will | just be this simple... +-------------------------------------------------------------------------*/ if (args->command == rtems_build_name('I', 'S', 'R', ' ')) clockIsr(); else if (args->command == rtems_build_name('N', 'E', 'W', ' ')) { if (!BSP_install_rtems_irq_handler (&clockIrqData)) { printk("Error installing clock interrupt handler!\n"); rtems_fatal_error_occurred(1); } } } return RTEMS_SUCCESSFUL; } /* Clock_control */ void Clock_exit() { BSP_remove_rtems_irq_handler (&clockIrqData); } /*-------------------------------------------------------------------------+ | PLEASE NOTE: The following is directly transcribed from the go32 BSP for | those who wish to use it with PENTIUM based machine. It needs | to be correctly integrated with the rest of the code!!! +--------------------------------------------------------------------------*/ #if 0 && defined(pentium) /* This can be used to get extremely accurate timing on a pentium. */ /* It isn't supported. [bryce] */ #define HZ 90.0 volatile long long Last_RDTSC; #define RDTSC()\ ({ long long _now; __asm __volatile (".byte 0x0F,0x31":"=A"(_now)); _now; }) long long Kernel_Time_ns( void ) { extern rtems_unsigned32 _TOD_Ticks_per_second; unsigned isrs_per_second = Clock_isrs_per_tick * _TOD_Ticks_per_second; long long now; int flags; disable_intr(flags); now = 1e9 * Clock_driver_ticks / isrs_per_second + (RDTSC() - Last_RDTSC) * (1000.0/HZ); enable_intr(flags); return now; } /* Kernel_Time_ns */ #endif /* 0 && pentium */
Go to most recent revision | Compare with Previous | Blame | View Log