URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [i386/] [pc386/] [console/] [console.c] - Rev 30
Go to most recent revision | Compare with Previous | Blame | View Log
/*-------------------------------------------------------------------------+ | console.c v1.1 - PC386 BSP - 1997/08/07 +--------------------------------------------------------------------------+ | This file contains the PC386 console I/O package. +--------------------------------------------------------------------------+ | (C) Copyright 1997 - | - NavIST Group - Real-Time Distributed Systems and Industrial Automation | | http://pandora.ist.utl.pt | | Instituto Superior Tecnico * Lisboa * PORTUGAL +--------------------------------------------------------------------------+ | Disclaimer: | | This file is provided "AS IS" without warranty of any kind, either | expressed or implied. +--------------------------------------------------------------------------+ | This code is based on: | console.c,v 1.4 1995/12/19 20:07:23 joel Exp - go32 BSP | With the following copyright notice: | ************************************************************************** | * COPYRIGHT (c) 1989-1999. | * On-Line Applications Research Corporation (OAR). | * | * The license and distribution terms for this file may be | * found in found in the file LICENSE in this distribution or at | * http://www.OARcorp.com/rtems/license.html. | ************************************************************************** | | $Id: console.c,v 1.2 2001-09-27 11:59:48 chris Exp $ +--------------------------------------------------------------------------*/ #include <stdio.h> #include <stdlib.h> #include <assert.h> #include <unistd.h> #undef __assert void __assert (const char *file, int line, const char *msg); #include <bsp.h> #include <irq.h> #include <rtems/libio.h> #include <termios.h> #include <uart.h> #include <libcpu/cpuModel.h> /* * Possible value for console input/output : * BSP_CONSOLE_PORT_CONSOLE * BSP_UART_COM1 * BSP_UART_COM2 * * Note: * 1. Currently BSPPrintkPort, cannot be assigned to COM2, * it will be fixed soon. * * 2. If both BSPConsolePort and BSPPrintkport are assigned * to same serial device it does not work that great */ int BSPConsolePort = BSP_CONSOLE_PORT_CONSOLE; int BSPPrintkPort = BSP_CONSOLE_PORT_CONSOLE; /* int BSPConsolePort = BSP_UART_COM2; */ int BSPBaseBaud = 115200; extern BSP_polling_getchar_function_type BSP_poll_char; /*-------------------------------------------------------------------------+ | External Prototypes +--------------------------------------------------------------------------*/ extern void _IBMPC_keyboard_isr(void); extern rtems_boolean _IBMPC_scankey(char *); /* defined in 'inch.c' */ extern char BSP_wait_polled_input(void); extern void _IBMPC_initVideo(void); static int conSetAttr(int minor, const struct termios *); static void isr_on(const rtems_irq_connect_data *); static void isr_off(const rtems_irq_connect_data *); static int isr_is_on(const rtems_irq_connect_data *); static rtems_irq_connect_data console_isr_data = {BSP_KEYBOARD, _IBMPC_keyboard_isr, isr_on, isr_off, isr_is_on}; static void isr_on(const rtems_irq_connect_data *unused) { return; } static void isr_off(const rtems_irq_connect_data *unused) { return; } static int isr_is_on(const rtems_irq_connect_data *irq) { return BSP_irq_enabled_at_i8259s(irq->name); } void __assert (const char *file, int line, const char *msg) { static char exit_msg[] = "EXECUTIVE SHUTDOWN! Any key to reboot..."; unsigned char ch; /* * Note we cannot call exit or printf from here, * assert can fail inside ISR too */ /* * Close console */ close(2); close(1); close(0); printk("\nassert failed: %s: ", file); printk("%d: ", line); printk("%s\n\n", msg); printk(exit_msg); ch = BSP_poll_char(); printk("\n\n"); rtemsReboot(); } /*-------------------------------------------------------------------------+ | Console device driver INITIALIZE entry point. +--------------------------------------------------------------------------+ | Initilizes the I/O console (keyboard + VGA display) driver. +--------------------------------------------------------------------------*/ rtems_device_driver console_initialize(rtems_device_major_number major, rtems_device_minor_number minor, void *arg) { rtems_status_code status; /* * The video was initialized in the start.s code and does not need * to be reinitialized. */ if(BSPConsolePort == BSP_CONSOLE_PORT_CONSOLE) { /* Install keyboard interrupt handler */ status = BSP_install_rtems_irq_handler(&console_isr_data); if (!status) { printk("Error installing keyboard interrupt handler!\n"); rtems_fatal_error_occurred(status); } status = rtems_io_register_name("/dev/console", major, 0); if (status != RTEMS_SUCCESSFUL) { printk("Error registering console device!\n"); rtems_fatal_error_occurred(status); } printk("Initialized console on port CONSOLE\n\n"); } else { /* * Set up TERMIOS */ rtems_termios_initialize (); /* * Do device-specific initialization */ /* 9600-8-N-1 */ BSP_uart_init(BSPConsolePort, 9600, 0); /* Set interrupt handler */ if(BSPConsolePort == BSP_UART_COM1) { console_isr_data.name = BSP_UART_COM1_IRQ; console_isr_data.hdl = BSP_uart_termios_isr_com1; } else { assert(BSPConsolePort == BSP_UART_COM2); console_isr_data.name = BSP_UART_COM2_IRQ; console_isr_data.hdl = BSP_uart_termios_isr_com2; } status = BSP_install_rtems_irq_handler(&console_isr_data); if (!status){ printk("Error installing serial console interrupt handler!\n"); rtems_fatal_error_occurred(status); } /* * Register the device */ status = rtems_io_register_name ("/dev/console", major, 0); if (status != RTEMS_SUCCESSFUL) { printk("Error registering console device!\n"); rtems_fatal_error_occurred (status); } if(BSPConsolePort == BSP_UART_COM1) { printk("Initialized console on port COM1 9600-8-N-1\n\n"); } else { printk("Initialized console on port COM2 9600-8-N-1\n\n"); } if(BSPPrintkPort == BSP_UART_COM1) { printk("Warning : This will be the last message on console\n"); /* * FIXME: cast below defeats the very idea of having * function pointer types defined */ BSP_output_char = (BSP_output_char_function_type) BSP_output_char_via_serial; BSP_poll_char = (BSP_polling_getchar_function_type) BSP_poll_char_via_serial; } else if(BSPPrintkPort != BSP_CONSOLE_PORT_CONSOLE) { printk("illegal assignement of projtk channel"); rtems_fatal_error_occurred (status); } } return RTEMS_SUCCESSFUL; } /* console_initialize */ static int console_open_count = 0; static int console_last_close(int major, int minor, void *arg) { BSP_remove_rtems_irq_handler (&console_isr_data); return 0; } /*-------------------------------------------------------------------------+ | Console device driver OPEN entry point +--------------------------------------------------------------------------*/ rtems_device_driver console_open(rtems_device_major_number major, rtems_device_minor_number minor, void *arg) { rtems_status_code status; static rtems_termios_callbacks cb = { NULL, /* firstOpen */ console_last_close, /* lastClose */ NULL, /* pollRead */ BSP_uart_termios_write_com1, /* write */ conSetAttr, /* setAttributes */ NULL, /* stopRemoteTx */ NULL, /* startRemoteTx */ 1 /* outputUsesInterrupts */ }; if(BSPConsolePort == BSP_CONSOLE_PORT_CONSOLE) { ++console_open_count; return RTEMS_SUCCESSFUL; } if(BSPConsolePort == BSP_UART_COM2) { cb.write = BSP_uart_termios_write_com2; } status = rtems_termios_open (major, minor, arg, &cb); if(status != RTEMS_SUCCESSFUL) { printk("Error openning console device\n"); return status; } /* * Pass data area info down to driver */ BSP_uart_termios_set(BSPConsolePort, ((rtems_libio_open_close_args_t *)arg)->iop->data1); /* Enable interrupts on channel */ BSP_uart_intr_ctrl(BSPConsolePort, BSP_UART_INTR_CTRL_TERMIOS); return RTEMS_SUCCESSFUL; } /*-------------------------------------------------------------------------+ | Console device driver CLOSE entry point +--------------------------------------------------------------------------*/ rtems_device_driver console_close(rtems_device_major_number major, rtems_device_minor_number minor, void *arg) { rtems_device_driver res = RTEMS_SUCCESSFUL; if(BSPConsolePort != BSP_CONSOLE_PORT_CONSOLE) { res = rtems_termios_close (arg); } else { if (--console_open_count == 0) { console_last_close(major, minor, arg); } } return res; } /* console_close */ /*-------------------------------------------------------------------------+ | Console device driver READ entry point. +--------------------------------------------------------------------------+ | Read characters from the I/O console. We only have stdin. +--------------------------------------------------------------------------*/ rtems_device_driver console_read(rtems_device_major_number major, rtems_device_minor_number minor, void *arg) { rtems_libio_rw_args_t *rw_args = (rtems_libio_rw_args_t *)arg; char *buffer = rw_args->buffer; int count, maximum = rw_args->count; if(BSPConsolePort != BSP_CONSOLE_PORT_CONSOLE) { return rtems_termios_read (arg); } for (count = 0; count < maximum; count++) { /* Get character */ buffer[count] = _IBMPC_inch_sleep(); /* Echo character to screen */ _IBMPC_outch(buffer[count]); if (buffer[count] == '\r') { _IBMPC_outch('\n'); /* CR = CR + LF */ } if (buffer[count] == '\n' || buffer[count] == '\r') { /* What if this goes past the end of the buffer? We're hosed. [bhc] */ buffer[count++] = '\n'; buffer[count] = '\0'; break; } } rw_args->bytes_moved = count; return ((count >= 0) ? RTEMS_SUCCESSFUL : RTEMS_UNSATISFIED); } /* console_read */ /*-------------------------------------------------------------------------+ | Console device driver WRITE entry point. +--------------------------------------------------------------------------+ | Write characters to the I/O console. Stderr and stdout are the same. +--------------------------------------------------------------------------*/ rtems_device_driver console_write(rtems_device_major_number major, rtems_device_minor_number minor, void * arg) { rtems_libio_rw_args_t *rw_args = (rtems_libio_rw_args_t *)arg; char *buffer = rw_args->buffer; int count, maximum = rw_args->count; if(BSPConsolePort != BSP_CONSOLE_PORT_CONSOLE) { return rtems_termios_write (arg); } for (count = 0; count < maximum; count++) { _IBMPC_outch(buffer[count]); if (buffer[count] == '\n') _IBMPC_outch('\r'); /* LF = LF + CR */ } rw_args->bytes_moved = maximum; return RTEMS_SUCCESSFUL; } /* console_write */ /* * Handle ioctl request. */ rtems_device_driver console_control(rtems_device_major_number major, rtems_device_minor_number minor, void * arg ) { if(BSPConsolePort != BSP_CONSOLE_PORT_CONSOLE) { return rtems_termios_ioctl (arg); } return RTEMS_SUCCESSFUL; } static int conSetAttr(int minor, const struct termios *t) { int baud; switch (t->c_cflag & CBAUD) { case B50: baud = 50; break; case B75: baud = 75; break; case B110: baud = 110; break; case B134: baud = 134; break; case B150: baud = 150; break; case B200: baud = 200; break; case B300: baud = 300; break; case B600: baud = 600; break; case B1200: baud = 1200; break; case B1800: baud = 1800; break; case B2400: baud = 2400; break; case B4800: baud = 4800; break; case B9600: baud = 9600; break; case B19200: baud = 19200; break; case B38400: baud = 38400; break; case B57600: baud = 57600; break; case B115200: baud = 115200; break; default: baud = 0; rtems_fatal_error_occurred (RTEMS_INTERNAL_ERROR); return 0; } BSP_uart_set_baud(BSPConsolePort, baud); return 0; } /* * BSP initialization */ BSP_output_char_function_type BSP_output_char = (BSP_output_char_function_type) _IBMPC_outch; BSP_polling_getchar_function_type BSP_poll_char = BSP_wait_polled_input;
Go to most recent revision | Compare with Previous | Blame | View Log